Page 2
Quick Start Guide Follow the steps in this guide to install the AP in your network. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction.
Quick Start Guide Attach External Antennas Remove the front port cover by pushing the locking tab up and then sliding the cover off. Connect external antennas to the AP’s 5 GHz RP-SMA connectors using RF coaxial cable provided in the antenna package.
Quick Start Guide Connect the Ethernet cable from the AP to the “POE” port on the power injector. Connect Ethernet cable from the “LAN” port on the power injector to a LAN switch. Connect the power cord to a nearby AC power source (100-240 VAC, 50/60 Hz).
Quick Start Guide 6. Connect to the Web The stand-alone APs offer a web-based management interface for the User Interface configuration of all the unit’s features. You can make initial configuration changes by connecting a PC directly to the AP’s ETH1 RJ-45 port.
Quick Start Guide Hardware Specifications Item Specification Chassis Size (H x W x D:) 283 x 94 x 50 mm (11.14 x 3.7 x 1.97 inches) Weight 762 g (1.68 lb) Temperature Operating: -20 °C to 65 °C (-4 °F to 149 °F) Storage: -30 °C to 80 °C (-22 °F to 176 °F) Humidity Operating: 15% to 95% (non-condensing)