AJ9 switch snap-in mounting type
AJ9 switch screw mounting type
RoHS Directive compatibility information
http://www.nais-e.com/
CONSTRUCTION
Contact gap (more than 3mm)
The EN60950 (intended for office automation
equipment) conforms with a 3mm gap.
When directly opening or closing the primary power
supply side, a contact gap of at least 3mm is required
in order to ensure safety.
POWER ROCKER SWITCH
FEATURES
1. Power rocker switches for safety
requirements.
• All versions comply with ClassII
EN61058-1 insulation grade.
Insulation distance: 8mm Min.
Contact gap: 3mm Min.
• International Standard-approved
status
AJ9 switch
2. High inrush current resistance is
ideal for office automation equipment.
Type
Inrush
AJ9
100A
3. Eight standard actuator colors
White, black, red, dark gray, light gray,
blue, green, yellow
Actuator
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
Already approved
UL, CSA, VDE, SEMKO
Expected
Contact rating
life
16A 250V AC
Min.10
4
Case
Snap-in Clip
Dustproof construction
AJ9 (J9)
AJ9 (J9)
SWITCHES
PRECAUTIONS WHEN
USING CADMIUM-FREE
CONTACT TYPE
Models with cadmium-free contacts have
been introduced in order to reduce
environmentally harmful substances. ("F"
is affixed to the end of the part number.)
We ask customers who are currently
using products with cadmium-containing
contacts (no "F" at the end of the part
number) to please make the switch to
models with cadmium-free contacts.
When switching, operating life may differ
depending on the load. Please be sure to
verify this by conducting an evaluation
using actual equipment.
VDE