Panasonic WA-H120N Specification Sheet

A M P L I F I E R S
MIXING AMPLIFIER
WA-H60N
90W (MAX), 60W (RMS)
•
There are a lot of input jacks: 3 for microphones, 6 for lines,
paging and chime
•
5-station speaker selector: selectable up to 5 announcement
locations. All announcement is possible with the ALL switch,
whether the speaker selector is ON/OFF.
•
5-point LED level meter makes to check the sound
level easy.
•
Smooth and clear announcement call is possible, since the
FRONT MIC input and LINE4/CHIME and LINE3/PAGING
input are incorporated a priority circuit.
MUTING FUNCTION: effects to the audio signal supplied from
FRONT MIC, LINE 4/CHIME and LINE 3 PAGING Jacks.
Radio
BGM

System Diagram

MIC1,MIC2
Input terminal
(-66dB,10k Balaced)
LINE 5 MIC1
LINE 6 MIC2
Play
Tape Deck
CD Player
4
Announcement through
FRONT MIC, LINE4/CHIME
or LINE3/PAGING
Time
LINE4
0dB, 200 Play
Unbalaced
LINE 3 PAGING
LINE 4 CHNE
LINE4
Input Terminal
(-20dB,10k Balaced)
1/4-type Phone Plug
SP HOT(N)
1-5
LINE 2
-20dB, 10k
Unbalanced
LINE 1
-20dB, 10k
Unbalanced
MIXING AMPLIFIER
WA-H120N
180W (MAX), 120W (RMS)

SPECIFICATIONS

Model No.
Power Supply
Power Consumption Rated Output 123 W
Rated Output
Frequency Response
Distortion Rate
Tone Response
S/N Ratio
Speaker Switch
Muting Level
Input Circuit
Front MIC
*1 LINE 5/MIC 1
*1 LINE 6/MIC 2
*1 LINE 3/PAGIMG
*1 LINE 4/CHIME
LINE 1
LINE 2
PA INPUT
Output Circuit
LINE OUT
REC OUT
Speaker Out
Speaker Out Terminals Screw jack
Dimensions (W x H x D) 420 x 88 x 300 mm
Weight
Finish
Factory preset LINE IN
*1
* 2 Speaker selector: 5 station +ALL (100 V LINE)
Tape Deck
Line Out Input
PA Input Output
Graphic Equalizer
REC Out REC
Tape Deck
PA Input
for Parallel operation
Mixing Amplifier
WA-H60N
AC 110 V - 120 V/AC 220 V - 240 V (50/60 Hz)
248 W
60 W (100 V/170 Ω Load), 90 W (MAX) 120 W (100 V/83 Ω Load), 180 W (MAX)
50 - 20,000 Hz ±3 dB (LINE 2:1/3 rated output)
less than 0.5 % (LINE 2:1 kHz rated output)
more than 100, 10,000 Hz ±10 dB (1kHz standard)
more than 75 dB (on JIS A-Curve)
5 Station +ALL
0 - 35 dB
Input Impedance Input Level S/N
10 kΩ Electronically balanced –66 dBV more than 55 dB
50 kΩ Electronically balanced –20 dBV/–66 dBV more than 60 dB
100 kΩ Electronically balanced –20 dBV/–66 dBV more than 60 dB
20 kΩ –20 dBV/0 dBV more than 60 dB
200 kΩ 0 dBV/–30 dBV more than 60 dB
20 kΩ –20 dBV more than 60 dB
20 kΩ –20 dBV more than 60 dB
20 kΩ 0 dBV more than 75 dB
Load Impedance Output Level Load Impedance
more than 10 kΩ 0 dB more than 10 kΩ 0 dBV
more than 10 kΩ 0 dB more than 10 kΩ 0 dBV
170 Ω/83 Ω/41 Ω/4 Ω 83 Ω/41 Ω/21 Ω/4 Ω 100 V/70 V/50 V
100 V/70 V/50 V
approx. 8.4 kg approx. 9.8 kg
Panel: Gun Metallic (ABS Resin)
Case: Munsell N2.5 (Colored Steel Plate)
Front MIC Input Terminal
(-66dB,10k Balaced)
WA-H120N
Jack
Large, multiple
Large, multiple
Large, multiple
Large, multiple
Large, multiple
Pin (2)
Pin (2)
Pin
Output Level