Page 1
User manual for Laurastar upgraded equipment. FOR THE UPGRADED MODELS LAURASTAR S4/S5/S6/S7/X1/X2 SERVICE CODE: LUK_A-A1...
Page 2
First system usage Be sure to carefully read user manual of your model of the Laurastar equipment, main usage features like (filling with water, installation, cleaning, and safety precautions etc) are not reflected in the current manual. It is very important to strictly follow all advices and operate features of the ironing system according to the instructions, which could be found in the...
Page 3
Iron stops and resume work automatically When system is idle for more than 15 minutes, it turns off automatically. There is an alarm in the system, which produces alarm beep once a minute while in idle. In order to restart heating of an ironing system, all you need is to push any button, or raise the iron of the table, when heating starts short alarm beep is heard.
Page 4
Change the steam pulsing velocity, and fan off delay, in a programming mode, by pushing “Fan” + “Manual Steam Delivery” buttons for more than 3 seconds. Switching between modes programming and usage is accompanied by 3 beeps of an alarm. Change the velocity of steam delivery by pressing between 1-2-3 portions of steam per second.