Related Manuals for Watson Pro C-AM-2E
Summary of Contents for Watson Pro C-AM-2E
- Page 1 C-AM-2E C-VM-2E Dual Position Li-ion Battery Charger with DC Output Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the charger.
-
Page 2: Safety Instructions
Deploy the charger stand legs, and place the charger on a flat surface. Use the included AC power cable to connect the charger to a power source. Align the 3-stud mount (C-AM-2E) or V-Mount (C-VM-2E) on the battery with the appropriate slots in the charger. - Page 3 • Charger is turned on with no batteries connected. (C-VM-2E) Green • Charger is turned on with no batteries connected. (C-AM-2E) • Battery is fully charged or battery capacity is above 95%. • Battery connected with low or no power.
-
Page 4: Specifications
3-STUD MOUNT CHARGER (C-AM-2E) OPERATION The charger will recognize when a battery is connected to the L or R channel. When two batteries are connected, the charger will output 2.5 A per channel. When one battery is connected, the charger outputs 5 A to the connected battery.