Advertisement
Quick Links
Q U I C K S T A R T G U I D E
AudioCodes MP-112, MP-114, MP-118, and MP-124 ATAs
Quick Start Guide (Analog Phone and Fax, 2-24 ports)
Activating Your AudioCodes ATA
You need your activation code (received via email) to activate your AudioCodes ATA. The activation code is received via email. You
can also retrieve the code via 8x8 Account Manager, if you have administrator access, by following these instructions:
1. Go to login.8x8.com.
2. Enter your administrator username and password, click Login.
3. In the Application Panel, click the Account Manager icon to launch the application.
4. Click Phone System in the top navigation bar, and select View All Extensions.
5. Click Activate Device next to the extension you wish to activate. A pop-up displays the activation code for the extension.
Note: If you are activating an Overhead Paging system, follow the special instructions provided in the pop-up.
6. To activate your device for voice or fax service, connect an analog phone (or fax machine with a phone) to the FXS port on the
AudioCodes ATA that you want to activate.
7. Lift the handset, and follow the voice instructions to dial in the activation code. You hear a message confirming your ATA is
activated. The device should reboot automatically; you should only manually reboot the ATA if it does not reboot after 10
minutes, and if there is no dial tone on an attached analog device.
Note: If you activate any port on the ATA, the other ports on the same ATA should activate automatically.
AudioCodes MP-112
AudioCodes MP-114
AudioCodes MP-118
AudioCodes MP-124
Advertisement
Summary of Contents for 8x8 Inc MP-112
- Page 1 Q U I C K S T A R T G U I D E AudioCodes MP-112, MP-114, MP-118, and MP-124 ATAs Quick Start Guide (Analog Phone and Fax, 2-24 ports) Activating Your AudioCodes ATA You need your activation code (received via email) to activate your AudioCodes ATA. The activation code is received via email. You can also retrieve the code via 8x8 Account Manager, if you have administrator access, by following these instructions: 1.
- Page 2 10/100Base- TX Uplink socket. RS-232 RS-232 status port (requires a DB-9 to PS/2 adapter). Note: MP-112 does not provide a serial port. Provides two, four, or eight FXS ports (depending on MediaPack model). Note: MP-112 does not support FXO interfaces.
-
Page 3: Analog Fxs
A U D I O C O D E S Q U I C K S T A R T G U I D E Label Component Description Protective earthing screw (mandatory for all installations). Accepts a 6-32 UNC screw. 100-240 V~ 50-60Hz 1A AC power cord socket ANALOG FXS... - Page 4 A U D I O C O D E S Q U I C K S T A R T G U I D E ATA Status: Indicator Lights The status of your ATA can be determined by looking at the indicator lights on the front panel. MP-11x provides LEDs on its front panel, as shown below and described in the subsequent table.
- Page 5 A U D I O C O D E S Q U I C K S T A R T G U I D E MP-124 provides LEDs on its front panel, as shown below and described in the subsequent table. Description Channels Green On: Off-hook...
- Page 6 A U D I O C O D E S Q U I C K S T A R T G U I D E Breakout Solutions for MP124 ATA Breakout solutions expose the individual 24 ports of the MP124 by providing individual standard phone jacks. Typically, there is one jack for rack mounting and one jack for desktop use, as shown below.