Clas Ohlson 38-6264 User Manual

9000 mAh Battery Pack
Art.no 38-6264
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you have any questions concerning technical problems please
contact our Customer Services.
Safety
• Never subject the battery pack to direct sunlight, high
temperatures, dusty environments or heavy vibrations.
• Never use the battery pack if it has been damaged in any way.
• The battery pack should not be opened or disassembled.
• Never expose the battery pack to impacts, shocks, rain, liquids or
moisture.
• Make sure the battery pack is stored out of the reach of children.
• The battery pack must only be charged via the Micro USB port
(max 2 A charging current).
• The battery pack must not be immersed in water.
• Operating temperature: 0–40 ºC.
• To charge the battery pack connect the lead to the Micro-USB
port (6), marked "IN" on the cover and to the charge source.
To charge devices from the battery pack, connect the USB end to
the USB-A port (4) marked "OUT" on the battery pack's cover and
the other end to the device to be charged.
• The battery pack must never be short-circuited.
• The waterproof cover must always be completely closed when
the battery pack is not in use.
• Remove the charging lead once charging is complete.
• Never enclose the battery pack in any type of case or other
container while it is charging or being charged. Doing so will hinder
the battery pack's ability to cool itself and could lead to overheating.
Description
1
6
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
1. Power switch: Pressing the power switch once will show
the battery pack's charge capacity while being charged or show
the charge status of a device that is being charged. Pressing twice,
will turn the battery pack's torch on/off.
2. LED indicators: Shows show the battery pack's charge capacity
while being charged or shows the charge status of a device that is
being charged whenever the power button is pushed.
3. LED torch: Pressing the power button twice turns the LED torch on/off.
4. USB port for charging external devices.
5. Waterproof cover.
6. Micro USB port for charging the battery pack.
Included
accessories
7. USB cable
8. Compass
9. Carabiner
10. Carrying strap
Charging the battery pack
The battery is charged by connecting the included USB cable to a USB
port on your computer or USB charger (sold separately) which is then
connected to the mains.
1. Press the power button (1) once to check the battery pack's
charge capacity. There are 4 LED indicators that are used to show
the battery pack's charge capacity:
- 1 LED flashing 0–5% charge. The battery pack should be
- 1 LED lit
- 2 LEDs lit
- 3 LEDs lit
2 3
- 4 LEDs lit
2. To charge the battery pack, connect the included charge lead's
USB end to a computer or other charge source and the other end
to the battery pack's pack's Micro USB port (6).
Note: Charging time depends entirely on battery's current capacity.
Using a USB charge source to charge a completely empty battery
will take approx approximately 20 hours. Charging a completely
4
empty battery from
a mains charge
5
source at 2.0 A will
take approx
approximately
5–6 hours.
7 8 10
9
charged as soon as possible.
5–25% battery charge. Charging the battery
pack is recommended.
25–50% battery charge.
50–75% battery charge.
75–100% battery charge.
The 4 LED indicators are also used to show the charge status of
the device being charged:
• 1 LED flashing 0–25% charged
• 1 LED lit and 1 LED flashing 25–50% charged
• 2 LEDs lit and 1 LED flashing 50–75% charged
• 3 LEDs lit and 1 LED flashing 75–99% charged
• 4 LEDs lit 100% charged
Note: The battery pack cannot be used to charge other devices whilst
it is being charged itself.
Using the battery pack to charge
Connect the supplied charge cable's USB end to the battery
pack (4) and the Micro USB end to the device. Alternatively,
you may use the charge cable that came with the device if it
has identical specifications.
Disconnect the charger cable
form the battery pack once
charging is complete.
Note: Do not connect products with
charging currents exceeding 2.1 A.
Note: The included Micro-USB cable is specially
designed for charging mobile phones having a Micro USB port
and cannot be used to transfer data.

Care and maintenance

• Clean the battery pack using a lightly moistened cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Fully charge the battery pack every third month if it is not to be
used for a long time.
• Store the battery pack in a dry, dust-free place.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.

Specifications

Capacity 9000 mAh (li-ion battery)
Input charging current 5 V DC, max 2 A
Charging time 5–6 hours when charging an empty battery
pack from a 2 A source (mains/external charger)
(charger sold separately)
Approximately 20 hours when charging from
a 0.5 A source (computer, etc.).
Output charging current 5 V, max 2.1 A
Operating temperature 0 to 45 °C
Size 101 × 64 × 27 mm
Weight 223 g
Operating temperature 0–45 °C
The product can be charged/discharged up to 300 times without loss
of capacity.