Advertisement
Quick Links
___________________________________________________________________
Rio Series – R22 & R44 Dante Interface Models -
1. What's in the Box
The Rio Series R22-P, or R44-P, or R22-WP-X, or R22-WP-M, Dante interface device hardware
This hard copy of the Quick Start Guide
USB drive with the Dante Controller software & this Quick Start Guide
External power supply (can also be PoE powered)
Detachable 3.81mm Euro terminal block connectors
A pair of surface mount brackets (R22-P & R44-P models only- as shown attached above)
2. What you need to provide
A Windows PC for our processors software use. A Windows or Mac OSX computer for Dante Controller
software use.
See minimum system requirements in both software's Help File.
Network (Ethernet) interface
Ethernet cable (Cat5, Cat6 or better)
3. Getting Help
Technical Support at
North America: Contact Technical Support at 905-770-0055 ext 3 (forwards to tech support
Europe: Contact Technical Support (Marco Koorstra) at +31 29940 1100
Asia: Contact Technical Support (Tim Cheung) at +86 13602279067
Xilica Audio Design Canada
Quick Start Guide
support@xilica.com
cell phone after regular office hours – 9am-6pm EST - Eastern Standard Time)
Rio Series – R22 and R44 Models
Quick Start Guide
Web Site: www.xilica.com
Page 1
www.xilica.com
Advertisement
Summary of Contents for Xilica Audio Design RIO R22
- Page 1 – 9am-6pm EST - Eastern Standard Time) Europe: Contact Technical Support (Marco Koorstra) at +31 29940 1100 Asia: Contact Technical Support (Tim Cheung) at +86 13602279067 Xilica Audio Design Canada www.xilica.com Page 1...
-
Page 2: Important Safety Information
15. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. 16. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. Xilica Audio Design Canada www.xilica.com Page 2... -
Page 3: Introduction And Description
Power Status LED will light to notify you that the interface device is connected to a power source. Dante Network Audio RJ-45 Connector Use a Cat5, Cat6 or better network cable to connect the Rio R22-P and R44-P device to your Dante network. Xilica Audio Design Canada www.xilica.com... - Page 4 Locate front cover slot & use a screwdriver to assist removal of snap on outer front cover. Rear panel - Dante Network Audio RJ-45 Connector Use Cat5, Cat6 or better network cable to connect the Rio R22-WPX and R22-WP-M devices to your Dante network. Xilica Audio Design Canada www.xilica.com...
-
Page 5: Operation
– (a) Configure Xilica Dante enabled DSP with our processor software and (b) Use the Dante Controller software to complete the configuration and audio routing for the connected Rio R22 & R44 Dante interface devices. Same procedures apply when connecting other Dante enabled product brands to our Dante enabled processors. - Page 6 Receivers modules on the output side. Since we are preparing to add one 2x2 I/O - Rio R22 Dante interface to the Network inputs and one 4x4 I/O – Rio R44 Dante interface to the Network outputs of our system design, we have dropped/placed one Dante Virtual...
- Page 7 Besides all the parameter, preset, and control programming work that would normally be done, our focus here is the preparation for adding a 2x2 I/O - Rio R22 Dante interface to the input side of our processor and a 4x4 I/O - Rio R44 Dante interface to the output side of our Neutrino-N processor.
- Page 8 Dante Controller is a free software application that enables you to configure, route audio, and manage devices on a Dante network. Whether you are using our Rio R22 & R44 Dante interfaces (or other Dante enabled brands) with our Dante processors as described above in...