CCD. The camera and lens setup must be correct to avoid possible damage due to long term exposure to bright light. A lens with an automatic iris is recommended under these conditions. Baxall ICE Series Fixed Dome Cameras...
Parts Not Supplied Optional video service lead (part number ICED-SERV) The ICE dome camera can be mounted in two ways: Ceiling mount for installation into a tile ceiling; surface mount for installation directly to a hard surface or mounting structure.
(2, figure 6). Use only one of the BNC connectors to connect video. NOTE: ICED-B3H39 only - pass the video lead through the supplied ferrite (4, figure 6) as shown. Connect the power to the power terminals (3, figure 6). These cameras are designed to operate from a 12V DC or 24V AC power supply.
LL Phase Advance/Retard buttons (3 and 4, figure 9). Default is LL. Pressing both buttons simultaneously will reset LL to the factory default setting. For the ICED-B3H39 camera, LL is adjusted using the LL potentiometer (5, figure 9) Lens Level Adjust the lens iris level according to the lighting conditions.
Provision is made for the connection of a local video monitor to assist in setting up the camera (1, figure 10). Use the optional service connector ICED-SERV (not supplied). FINAL ASSEMBLY When all the connections and adjustments have been made, reattach the camera liner and dome cover (figure 11). DIMENSIONS Baxall ICE Series Fixed Dome Cameras...
Page 7
серии Baxall ICE Камеры черно-белого изображения...
Page 8
Baxall Limited Horsfield Way, Bredbury Park Industrial Estate, Stockport, Cheshire SK6 2SU Baxall Limited reserve the right to make changes to the product and specification of the product from time to time without prior notice Issue 1: 08/05 HB-ICE-MON-1...