CONTENTS INSTALLING THE BATTERIES ...3 USING YOUR a/v PRODUCER™...4 Features and Functions...4 SETTING THE CLOCK...7 QUICK SET UP ...8 SETTING UP INDIVIDUAL HOME ENTERTAINMENT COMPONENTS ...10 To Set Up Your Television ...10 To Set Up Your VCR or TV/VCR Combinations ...12 To Set Up Your Cable Box ...15 To Set Up Your DSS or Satellite Receiver ...16 To Set Up Your DVD or LD Player...18...
USING YOUR a/v PRODUCER Features and Functions The illustration below and the chart on the next two pages describe the features and the functions of the a/v Producer’s keypad. The following keys will always have the same function, regardless of which component you are controlling.
Feature Function The CH + (Channel Up) and CH – (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote. The MACRO and MACRO2 keys memorize up to 15 keystrokes that can be accessed in sequence at the press of a single key.
QUICK SET-UP To Quickly Set Up the a/v Producer to Operate Your Home Entertainment Components NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed. Turn on all of the components that you will be setting up.
SETTING UP INDIVIDUAL HOME ENTERTAINMENT COMPONENTS To Set Up Your Television: NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed. Turn on your TV. Press and release the TV key. Press and hold SETUP until the display screen changes from [TV and the TIME] to [TIMED SEQ].
To Set Up Your DVD or LD Player: NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed. Turn on your DVD or LD Player and insert a disc. Press and release the DVD key.
To Set Up Your CD or MD Player (cont.): Aim the remote control at the CD or MD player and press POWER or PLAY. Your player should turn OFF or start to play your disc. Press the ESC key to return the display to [CD and the TIME].
SETTING UP ADDITIONAL HOME ENTERTAINMENT COMPONENTS Besides the device keys that are already labeled (TV, VCR, CBL, etc.), the a/v Producer can also operate the following components: Cassette Decks, Home Automation, Digital Audio Tape, Turntables, Video Accessories, and Miscellaneous Audio Components (e.g., Graphic Equalizers and Digital Music Service Boxes).
0135, 0136, 0282 Set Up Codes for Home Automation 0240 Radio Shack LiteTouch 0084 Security System 0167 Lutron 0318 Universal X10 One For All 0167 Set Up Codes for Digital Audio Tape Carver 0158 Marantz Denon 0031 Philips Harman/Kardon 0158...
Finding Out Your Code After you have set up your components using the search, you may need to find out which four-digit code is operating your components. For example, to find out what four-digit code is operating your TV: Press and release the TV key. Press and hold SETUP until the display screen changes from [TV and the TIME] to [TIMED SEQ].
SETTING UP THE HOME THEATER KEY (cont.) Press SELECT. This will change the display to [TV]. Use the device keys (Device Key) TV, VCR, CBL/SAT or DVD to choose your CHANNEL source, then press SELECT. For example, if your Satellite will control channel chang- ing in the Home Theater Mode, press CBL/SAT + SELECT.
LEARNING FUNCTIONS ONTO THE 1L THROUGH 6L KEYS The 1L, 2L, 3L, 4L, 5L, and 6L keys can be used to customize those functions that are unique to your home entertainment needs. For example, the a/v Producer does not offer Tracking Up or Down for a VCR.
Deleting Functions from the L keys: 1 (Device Key) Press and release the Device key (e.g., VCR) where you want a/v Producer to learn new feature(s). Press and hold SETUP until the display screen changes from the device you selected [e.g., VCR and the TIME] to [TIMED SEQ].
NOTE: When setting up your sequence, you will need to include any keystrokes that would normally be required during regular usage, such as pressing ENTER after entering a channel number when changing channels. For example, enter a sequence that will start your VCR recording your DSS channel as follows: SAT + POWER + SAT + 2 + 7 + 5 + VCR + POWER + VCR + RECORD.
REPEATING A SERIES OF KEY PRESSES USING THE MACRO AND MACRO2 KEYS The a/v Producer has two Macro keys (MACRO and MACRO2) that will play back a series of key strokes at any time with the press of one key. Each sequence can have up to a maximum of 15 keystrokes.
HOW TO USE THE SLEEP KEY The a/v Producer has a SLEEP key that either oper- ates your component’s sleep timer or, if your compo- nent does not have a sleep timer, it activates the a/v Producer’s built-in sleep timer, after you activate SLEEP LOCK (see below).
To return volume control to a component (cont.): x 2 Press the MENU – key twice, the display will change to [CONFIG- URE]. Press SELECT, the display will change to [THEATR SEL]. x 2 Press MENU – two more times, the display will read [VOL LOCK].
CLEAR ALL If you would like to reset the a/v Producer of all advanced functions, use the CLEAR ALL feature. The CLEAR ALL feature will erase the following functions from the memory of the a/v Producer: Macro Sequences, Timed Macro Sequences, Volume Lock and Keymovers.
TROUBLESHOOTING Problem: Solution LCD screen begins to Replace the batteries with fade, does not appear four (4) new AAA alkaline or the red light blinks batteries. five times when you press a key? The a/v Producer does not operate Try all of the codes listed for your home entertain- your brand of home entertain- ment component?
ERROR MESSAGES Error Meaning MEM FULL Maximum memory capacity has been reached. BATTERY LO Replace batteries with four new "AAA" Alkaline batteries. TOO LONG Macro sequence being entered exceeds 15 keystrokes. LIST END You have reached the end of all valid codes using the Step-N-Set sequence.
TV Functions (cont.) The PROG key (SHIFT + MENU) operates your secondary menus. Use the MENU + (Up), MENU – (Down), (Left) and (Right) navigate through your menus. If your original remote control had a Select/Enter key for use in your menu, use SELECT or ENTER.
VCR Functions (cont.) The MENU key operates the same as the MENU or OSD (On Screen Display) key on your original re mote. Use the MENU + (Up), MENU – (Down), (Right) to navigate through your menus. If your original remote con- trol had a Select/Enter key for use in your menu, use SELECT or ENTER.
Cable Functions (cont.) Use the MENU + (Up), MENU – (Down), (Left) and (Right) navigate through your menus. If your original remote control had a Select/Enter key for use in your menu, use SELECT or ENTER. The SELECT key is used to make selections in the LCD Screen menu.
DVD/LD/Cassette Functions (cont.) The CENTER and REAR (SHIFT + CENTER) keys function the same as DISC A and DISC B keys on your original remote control. The SUR (Surround) key functions the same as the DISC key on your original remote control. DSS &...
Receiver/Tuner Functions (cont.) The MENU + (Up) and MENU – (Down) keys access REAR LEVEL + and REAR LEVEL – respectively. MENU (Left) and MENU (Right) access BALANCE LEFT and BALANCE RIGHT. NOTE: The SHIFT key accesses advanced features that are mapped under the MENU keys: SHIFT + MENU + = CENTER LEVEL +, SHIFT + MENU –...
KEY INDEX (cont.) CD Functions The transport keys (i.e., PLAY, REW, FF, STOP, PAU and REC) access the features of your CD Player. NOTE: The SHIFT key accesses advanced features that are mapped under the VCR keys: e.g., SHIFT + STOP = EJECT. 0 - 9 The Digit keys (0 - 9) control direct track access the same as the digit...
(90) days from the date of original purchase. This warranty does not cover damage or failures caused by products or services not supplied by One For All, or which result from accident, misuse, abuse, neglect, mis- handling, misapplication, faulty installation, set-up adjust-...