Page 1
MC3™ User's Guide To take full advantage of the ergonomic features of your new Sun Mountain MC3, please read the following information. ® SUN MOUNTAIN...
Page 2
• Umbrella holder mount. • Console tray includes a padded valuables tray and magnetic score card holder justable handle. • Lightweight aluminum frame.
Page 3
Your Micro Cart has several innovative features designed for convenience, easy access and use.
Page 4
INSTRUCTIONS FOR UNFOLDING YOUR MC3 STEP ONE: UNFOLDING THE UPRIGHT TUBES Release the folding latch underneath the accessory tray by lifting up on rim of the cup holder. While holding the front wheel in place with your hand or foot, pull the handle back...
Page 5
STEP THREE: ADJUSTING THE HANDLE HEIGHT To reset the handle height, release the handle by pulling the handle latch toward the accessory tray. Lift or lower the handle to the new height and secure the handle latch. STEP FOUR: LOADING YOUR GOLF BAG Unfold the triangular lower bag support and place the bottom of your golf bag on it.
Page 6
ACCESSORIES TRAY ASSEMBLY Item # Part # Description MC1-901 Tray Assembly MC1-501 Magnet Strap with Magnets MC1-502 Magnet Plate MC1-201 Torsion Spring SV1-225 M4-0.7 Nylock Nut MC1-278 M4-0.7x44mm Phillips Pan Head Screw MC1-910 Beverage Holder Kit MC1-304 Hinge Post MC1-203 3.6x6mm Phillips Pan Head Screw w/washer MC1-204 M3x5mm Mill Cauda with Pan Head Screw...
Umbrella Holder Receiver SV1-903A Umbrella Mount Kit MC1-703 Umbrella Holder Bungee w/Clasp MC3-914A_ Handle Tube Assembly (color specific) MC3-705 MC3 Black Handle Grip MC1-901 Accessories Tray Assembly MC1-206 4x20mm Phillips Pan Head Screw SV1-209 6.4mm Washer SV1-210 ¼”X20mm Phillips Pan Head Screw...
Page 8
Item # Part # Description MC3-910A_ Handle Latch Assembly (color specific) MC3-282 M5x43.5 Phillips Pan Head Screw SV1-221 M5 Nylock Nut MC3-283 Link 005-110 M4x40mm Phillips Pan Head Screw MC3-285 Upper Mount Plate MC3-349A Pivot Cap MC3-350A Handle Pivot MC3-351A...
Page 9
Item # Part # Description MC2-281 M6 X35mm Hexagon Screw SV1-202 M6 Nylock Nut MC3-912 Lower Bag Support Kit (new style/seat slot) Main Frame MC1-221 M4x14mm Screw MC3-912 Spade Supports (new bag support kit required) MC1-220 M3-0.5x12mm Phillips Pan Head Screw...
Page 10
Right Parallel Link (white only) MC3-277W MC3-337 Right Wheel Fitting MC1-230 Rear Axle MC3-702_ Right Rear Wheel-No Brake (color specific) Disc Brake (ordered with MC3-702_) MC3-259 Rear Rim MC1-215 6-12mm Flat Washer SV1-202 M6 Nut V1S-327R-_ Wheel center cap (color specific)
Page 11
Item # Part # Description MC3-234 M6x160mm Bolt MC1-235 6-14mm Flat Washer MC1-236 Upright Tube Pivot Post SV1-221 M5-0.8 Nylock Nut MC1-238 Upright Link MC1-239 M5X74.4mm Phillips Pan Head Screw MC1-240 M5X39mm Phillips Pan Head Screw SV1-202 M6 Nut MC1-242 M5-8x142.4mm Lower Milled Draw Bolt...
Page 12
MC1-245 M5-44.8mm Phillips Pan Head Screw SV1-302 Brake Housing SV1-303 Brake Mounting Base SV1-203 M4x20 HEX Screw SV1-204 Brake Spring MC3-259 Disc Brake MC1-260 3x10mm Phillips Pan Head Screw w/washer SV1-205 Brake Pin MC1-230 Rear Axle MC3-324 Left Wheel Fitting...
Page 13
Adjusting the Brake: The brake cable lengthens over time and as a result, the brake pin hits the disc brake. To tighten the brake cable, turn the brake cable adjustment stud clockwise (item 7) until the brake pin has enough clearance. Item # Part # Description...
Page 14
Extendable Front Axles If your bag pockets are touching the front wheels, the front axle can be extended to accommodate the larger bag. To extend the front axles, unscrew the four hex screws (A,B,C) using the allen wrench we provided, and pull the wheels outward.
IMPORTANT! Pulling the MC3 behind a power cart or using it as part of a rental fleet voids the warranty. Sun Mountain is the sole judge of any claim or warranty. Proof of purchase is required.
Page 16
For customer service or replacement parts call 1-800-227-9224. Visit our web site at www.sunmountain.com SUN MOUNTAIN 301 N. 1st Street W. Missoula, MT 59802...
Need help?
Do you have a question about the MC3 and is the answer not in the manual?
Questions and answers