Advertisement
Quick Links
DT-3 Console:
Assembly Instructions
After assembling the bike or treadmill, roll it to the desired location.
Plug the console connector into the connector coming from the front
of the treadmill or the bottom of the bike. Be sure to screw the two
connectors together with the attached thumb screws.
Time
Step/Level
Calories
Distance
Speed
Weight
Time
Step/Level
Calories
Distance
Speed
Weight
NOTE: Do not plug the power cord into the equipment until the
console is connected.
NOTE: All desk and DT-3 connectors plug into the bike D-connector the
same way.
Safety Key
When using the DT-3 with a treadmill use
safety key (F). When using the DT-3 with a
bike please use safety key (E).
22
on/off switch
console port
power receptacle
E
F
TREADMILL DESK
OPERATIONS
23
Advertisement
Summary of Contents for The Human Solution DT-3
- Page 1 Weight NOTE: Do not plug the power cord into the equipment until the console is connected. NOTE: All desk and DT-3 connectors plug into the bike D-connector the same way. Safety Key When using the DT-3 with a treadmill use safety key (F).
- Page 2 Treadmill Desk Specifications Treadmill Desk Specifications Console DT-3 DT-5 DT-7 Readouts Time, Steps, Calories, Distance, Time, Steps, Calories, Distance, Time, Steps, Calories, Distance, Speed Speed Speed Display Bluetooth Mechanics and Performance DT-3 DT-5 DT-7 Speed Range 0.4 - 4.0 mph 0.4 - 4.0 mph...
- Page 3 Treadmill Desk Console Overview Treadmill Desk Console Overview Starting the Treadmill Desk DT-3 1. Turn the On/Off switch located on the front right corner of the treadmill to the on position. 2. Make sure the safety key is installed on the console.
- Page 4 The Intelli-Guard feature does not replace the Charging Port (DT-3 Only) – This port can be used to charge your use of your safety key or taking proper precaution in stopping the wireless mobile devices.
- Page 5 Treadmill Desk Troubleshooting Treadmill Desk Troubleshooting The LifeSpan Treadmill Desk is designed and manufactured to be Problem “Uart” appears in the display. reliable and easy to use. However, if you have a problem, these Solution Turn the treadmill desk power switch off. Unplug and troubleshooting steps may help you find the cause.
- Page 6 Treadmill Desk Personal Settings Treadmill Desk Personal Settings To enter Personal Settings mode, press and hold the Stop/Pause button simultaneously with the button. After three seconds, F001 should show in the display. 1. To change between English and Metric mode, press the button 5.