Picture Controls; Rq¿Jxulqj 3Lfwxuh 6Hwwlqjv; Picture Settings Menu Items - Bush ELED42240FHDCNTD3D Installation & Operating Instructions Manual

General TV Operation

Picture Controls

&RQ¿JXULQJ 3LFWXUH 6HWWLQJV
3D Settings : Press to view 3D settings.
You can use different picture settings in detail.
Press "MENU" button and select the Picture icon
" " or " "
by using button. Press OK button to
view Picture Settings menu.
Operating Picture Settings Menu Items
" " or " "
Press button to highlight a
menu item.
" " or " "
Use button to set an item.
Press "MENU" button to exit.

Picture Settings Menu Items

Mode: For your viewing requirements, you can set
the related mode option. Picture mode can be set
to one of these options: Cinema,Game,Dynamic,
Sport and Natural.
Contrast: Sets the lightness and darkness
values of the screen.
Brightness: Sets the brightness value for the
screen.
Sharpness: Sets the sharpness value for the
objects displayed on the screen.
Colour: Sets the colour value for the screen.
Power Save Mode : Press
to set Power Save Mode.
If Picture Off is selected, "Screen will be off in 15
seconds." message will be displayed on the screen.
Select PROCEED and press OK to continue. The
screen will be off in 15 seconds. If you disable Power
Save Mode, Picture mode will be automatically set
to Dynamic.
NOTE: The backlight function will be inactive
if Power Save Mode is set to Eco.
For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105
Backlight : This setting controls the backlight
level and it can be set to Auto, Maximum,
Minimum or Medium.
or Media Browser mode or while picture mode
is set as Game.
Noise Reduction: If the broadcast signal is weak
and the picture is noisy, use Noise Reduction
setting to reduce the noise amount. Noise
Reduction can be set to one of these options:
Low, Medium, High or Off.
Advanced Settings
‡
contrast rate.
‡
Setting Cool option gives white colours a slight blue
stress.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red
stress.
‡
Auto, , 6XEWLWOH , 14:9 Zoom, 4:3,
Panoramic or Cinema.
‡
HDMI source, this feature will be visible in the
Picture Settings menu. You can use this feature
to enhance blackness in the picture. You can
set this feature as "On" for activating HDMI True
Black mode.
‡
at a different number of frames per second to
normal television programmes. Press " " or " "
buttons to set this feature Auto or Off. Turn this
IHDWXUH WR $XWR ZKHQ \RX DUH ZDWFKLQJ ¿OPV WR
see the fast motion scenes clearly.
‡
‡
" " or " "
button
‡
WHPSHUDWXUH YDOXHV XVLQJ WKH 5*% *DLQ IHDWXUH
Reset: Resets the picture settings to factory
default settings.
:KLOH LQ 9*$ 3& PRGH VRPH LWHPV LQ 3LFWXUH
PHQX ZLOO EH XQDYDLODEOH ,QVWHDG 9*$ PRGH
settings will be added to the Picture Settings
while in PC mode.
NOTE: Backlight can not be activate in VGA
Dynamic Contrast: Sets the dynamic
Colour Temp: Sets the desired colour tone.
Picture Zoom: Sets the picture size to
HDMI True Black :KLOH ZDWFKLQJ IURP
Film Mode (optional): Films are recorded
Skin Tone: Sets the skin tone level of your TV.
Colour Shift: Adjust the desired colour tone.
RGB Gain: You can configure the colour
27