Information Banner - Bush ELED42240FHDCNTD3D Installation & Operating Instructions Manual

Getting Started
Cable Installation
If you select CABLE option and press OK button
on the remote control to continue, the following
message will be displayed on the screen:
To continue please select YES and press OK. To
cancel operation, select NO and press OK.
*
You can select frequency ranges from this
screen. For highlighting lines you see, use "
" or " " button.
You can enter the frequency range manually by
using the numeric buttons on the remote control.
Set Start and Stop Frequency as desired by
using numeric buttons on the remote control.
After this operation, you can set Search Step as
8000 KHz or 1000 KHz.
If you select 1000 KHz, the TV will perform search
process in a detailed way. Searching duration will
thus increase accordingly.
:KHQ ILQLVKHG SUHVV OK button to start
automatic search. The TV will search and store
available broadcasts.
(*) Network option will not be available for UK.
For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Information Banner

:KHQHYHU \RX FKDQJH FKDQQHO XVLQJ WKH P-/P+
buttons or the numeric buttons, the TV displays
the broadcast picture along with an information
banner at the bottom of the screen.
The information banner can be displayed at any
time while watching TV by pressing the INFO
EXWWRQ RQ WKH UHPRWH FRQWURO ¿J 
Hint: Not all channels broadcast the programme
data. If the name and time of the programme
are not available, then information banner will
be displayed with blanks.
If the selected channel is locked, you must enter
the correct four-digit numeric code to view the
channel (default code is 0000, except for the
France). "Enter PIN" will be displayed on the
screen in such a case.
15