TP-Link TD-W8970 Quick Installation Manual

Quick
Installation Guide
300Mbps Wireless N Gigabit
ADSL2+ Modem Router
TD-W8970
7106506365 REV1.1.1
2. Configuring the Modem Router
1
Connect your computer to the modem router (Wired or Wireless).
Wired
USB WPS
ADSL USB LAN4/WAN LAN3 LAN2 LAN1 WiFi ON/OFF POWER
RESET
LED
2
Open a web browser on the computer and configure the modem router according to the following main clues.
a
Enter http://tplinkmodem.net or 192.168.1.1 in the
address bar. Type in admin for both the username
and password and click OK.
Note: If the login window does not appear, please refer to
FAQ->Q1.
http://tplinkmodem.net
admin
admin
d
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
Quick Setup-PPPoE
Auto-detection has succeeded!
DSL PVC:
Encapsulation Mode: LLC
Connection Type: PPPoE
Username:
Password:
Confirm Password:
Back
g
Click Finish to complete the setup.
Quick Setup-Complete
Time Zone Configuring: Success
Operation Mode Configuring: Success
Success
WAN Connection Configuring:
3G Connection Configuring: Success
Gateway and DNS Configuring: Success
Wireless Configuring: Success
Finish
Ethernet cable
b
Choose Quick Setup in the main menu and then click Next
to start the configuration. Select your Region and Time Zone
from the drop-down list, and then click Next.
Quick Setup-Region and Time Zone
Region
Time Zone
Login
e
Click Next to continue.
Note: You may enable 3G/4G as a backup method for Internet access.
8/35
XXXXXX
XXXXXX
XXXXXX
Next
Enjoy!
Now your wired and wireless
devices can connect to the Internet!
Note: If you have changed your wireless
network name and password, you must
sign in with the new name/password to
regain access to the Internet.
1. Connecting the Hardware
1
Connect the splitter and power adapter as follows. Then press the POWER ON/OFF button.
Phone Jack
Note: If you don't need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.
2
Check the Power and ADSL LED lights to ensure the hardware connection is correct.
Note: Please wait 1-2 minutes until the ADSL LED is on.
Connect wirelessly by using the default
Or
network name (SSID) and password
on the product label printed on the
bottom of the modem router.
Please Select
Please Select
Back Next
Quick Setup- 3G/4G
Enable 3G/4G as a backup solution for Internet access.
Back Next
Splitter
ADSL USB USB LED
Wireless
c
Select Yes to auto detect your connection type and then click
Next to continue.
Quick Setup-Auto Detection
Auto-Detect Connection Type:
Yes.
No. I want to configure the Internet connection myself.
f
Click Next to continue.
Note: You may rename your wireless network name and create your own
password.
Wireless Network Name and Password
Wireless Network Name:
Channel:
Security:
Password:
WPS
LAN4/WAN LAN3 LAN2 LAN1 WiFi ON/OFF POWER
RESET
Power (On) ADSL (On)
Back Next
TP-LINK_XXXX
Mode:
XXXXXXXX
Back Next