Panasonic TC-P55VT60 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Plasma TV
  5. TC-P55VT60
  6. Service manual

Panasonic TC-P55VT60 Service Manual

55 inch class 1080p plasma hdtv
Hide thumbs Also See for TC-P55VT60:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Manual Del Usuario
For detailed troubleshooting information and circuit explanations,
refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical
Guide(TG) documents posted on the TSN web site.
For information about this model, type TC-P2013 in the model box under "Direct Search".
55 inch Class 1080p Plasma HDTV
TC-P55VT60
Model No.
GPF16DU Chassis
© Panasonic Corporation 2013.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.MTNC130363CE
B34 Canada: B62

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-P55VT60

Summary of Contents for Panasonic TC-P55VT60

  • Page 1 "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search". © Panasonic Corporation 2013. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------4 2.2. About lead free solder (PbF) ----------------------------5 3 Service Navigation------------------------------------------------6 3.1. PCB Layout --------------------------------------------------6 4 Specifications ------------------------------------------------------7 5 Technical Descriptions------------------------------------------8 5.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.

  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Power Supply Main AV input, processing Remote receiver, Power LED, C.A.T.S sensor Data Driver (Lower Right) Data Driver (Lower Center) Data Driver (Lower Left) Scan Drive Sustain Drive Sustain out (Lower) Scan out (Upper) Non serviceable.

  • Page 7: Specifications

    3D Eyewear Battery Coin-shaped lithium battery CR2025 Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. Note • Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

  • Page 8: Technical Descriptions

    5 Technical Descriptions 5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine 5.1.1. General information: 1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for CinemaNow. 2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC (IC8000) and NAND Flash (IC8900).

  • Page 9: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds Note: Service Mode can not be entered when 3D signal input.

  • Page 10: Contents Of Adjustment Mode

    Contents of adjustment mode 6.1.4. • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...

  • Page 11: Option - Mirror

    6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.

  • Page 12: Hotel Mode

    6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Input Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched on.

  • Page 13: Data Copy By Usb Memory

    6.5. Data Copy by USB Memory Note: SD card can not be used for Data Copy. 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to other TVs.
  • Page 14 6.5.3. Data copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB terminal. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to USB Memory.
  • Page 15 6.5.4. Data copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB terminal. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from USB Memory to TV set.

  • Page 16: Troubleshooting Guide

    7 Troubleshooting Guide For detailed troubleshooting information and circuit explanations, refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search".

  • Page 17: Service Fixture & Tools

    8 Service Fixture & Tools 8.1. SC jig Purpose: To find the failure board (SC or SU/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number: TZSC09187 How to use: Caution: Remove SC jig from SC board after inspection.

  • Page 18: Disassembly And Assembly Instructions

    9 Disassembly and Assembly Instructions 9.1. Disassembly Flow Chart for the Unit This is a disassembly chart. When assembling, perform this chart conversely.

  • Page 19: Disassembly Procedure For The Unit

    9.2. Disassembly Procedure for the Unit 9.2.1. Remove the Pedestal stand 9.2.4. Remove the Wi-Fi module 1. Remove the Plasma panel section from the servicing 1. Remove the screw (×1 ) and remove the Wi-Fi stand and lay on a flat surface such as a table (covered module.

  • Page 20: Remove The Rear Cover

    9.2.7. Remove the Rear cover 9.2.9. Remove the A-Board , ×2 1. Unlock the hooks and the tapes to free the cables. 1. Remove the screws (×33 2. Disconnect the connectors (A1, A6, A8A and A12). 2. Remove the M8 caps (×4 3.

  • Page 21: Remove The Woofer

    9.2.10. Remove the Control unit assy 9.2.12. Remove the Woofer 1. Unlock the tape to free the cables. 1. Unlock the hooks and the tapes to free the cables. 2. Disconnect the connector (C14). 2. Disconnect the Relay connector. 3. Remove the claws (×2 ) and remove the Control unit 3.

  • Page 22: Remove The Fan

    9.2.14. Remove the Fan 9.2.16. Remove the SD-Board 1. Unlock the hooks and the tapes to free the cables. 1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and SD5) connected to the SD-Board. 2. Remove the screws (×3 each). 2.
  • Page 23 9.2.18. Work instructions for the Rubber 9.2.20. Work instructions for the Rubber sheet for SC-Board sheet for SS-Board 1. Rubber sheets are put between the board and rear cover 1. Rubber sheets are put between the board and rear cover for EMC requirement and heat radiation.

  • Page 24: Remove The Contact Metals

    9.2.23. Remove the Metal bracket bottom 9.2.26. Remove the Cabinet assy from the Plasma panel section , ×2 1. Remove the screws (×6 ) and the Metal bracket bottom. 1. Remove the Plasma panel section from the servicing stand and lay on a flat surface such as a table (covered by a soft cloth) with the Plasma panel surface facing downward.

  • Page 25: Replace The Plasma Panel

    9.2.28. Remove the C1-Board 9.2.31. Replace the Plasma panel 1. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and Caution: Remove the Plasma panel section from the servicing CB5). stand and lay on a flat surface such as a table (covered 2.

  • Page 26: Measurements And Adjustments

    10 Measurements and Adjustments 10.1. Adjustment 10.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.

  • Page 27: White Balance Adjustment

    10.1.2. White balance adjustment Name of measuring instrument Remarks Color analyzer (Minolta CS-1000 or equivalent) Procedure Remarks 1. Enter the Service mode. 2. Receive the Analog-RF (except for no signal) or set CVBS/YUV/HDMI (no signal is available). 3. Select [WB-ADJ] by using [1] and [2] key in the remote controller. 4.

  • Page 29: Block Diagram

    11 Block Diagram 11.1. Main Block Diagram MAIN AV INPUT,PROCESSING HDMI1-3 (HDMI2) TMDS DATA ETHERNET DATA HDMI I/F LAN CON I/F ETHERPHY ETHERNET ARCOUT SD CARD DATA IF_P/N SD CARD I/F SD CARD TUNER IF_P/N USB_DP/DN PEAKS PRO4 USB3-HDD USB0-3_DP/DN USB_DP/DN USB1 USB_DP/DN...

  • Page 30: Block (1/4) Diagram

    11.2. Block (1/4) Diagram JK8600 SPEAKER_L SPEAKER_R WOOFER D3101 SD CARD DIGITAL JK8602A JK8603B JK8606B JK8607 JK8601B JK8605 JK4701B JK4702B JK4703B AUDIO TU6706 ETHERNET USB3-HDD USB1 CAMERA USB2 WiFi MAIN AV INPUT,PROCESSING ANT IN HDMI1 HDMI2 HDMI3 TUNER DMD_ IIC0 IC4900 IC4901 AUDIO AMP...

  • Page 31: Block (2/4) Diagram

    11.3. Block (2/4) Diagram MAIN AV INPUT,PROCESSING X9500 20MHz IC9500 IC9300 PD6H LVDS DATA LVDS DATA LVDS RX LVDS TX VIDEO DATA IC9503 GCX1.1V PLASMA AI GCX1.1V DCDCGCX F15V VIDEO DATA SYSTEM_BUS LVDS DATA PA2001 H/V Sync Control VIDEO DATA 1.1V +1.1V Sub Filed Processor...

  • Page 32: Block (3/4) Diagram

    11.4. Block (3/4) Diagram POWER SUPPLY COLD COLD Q300-Q303 D105 F102 RESONANCE Q600 T301 D600 Q100 IC600 L100 Q101 L101 T303 CONTROL ERROR DET Q102 Q103 T302 Q701 D700 Q702 IC100 D704 IC300 Q601 DRIVER Vsus Q602 Vsus RESONANCE D302 CONTROL SS11 Q004...

  • Page 33: Block (4/4) Diagram

    11.5. Block (4/4) Diagram SCAN DRIVE SCAN OUT (UPPER) SUSTAIN DRIVE Reference Voltage SRV_VF5V TPVSUS Vsus Lo : 210V SRV_VSUS Vsus Hi : 215V IC16784,85 Reference Voltage IC14601-03 Vsus Vad = 200 5V(VFG_BASE) PC16897 Reference Voltage SRV_VFO SVR_VSUS TPVSUS Vsus Lo : 210V IPD CIRCUIT TPVAD Vsus Hi : 215V...

  • Page 35: Wiring Connection Diagram

    12 Wiring Connection Diagram 12.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 12.2. Wiring (1)

  • Page 36: Wiring (2)

    12.3. Wiring (2)

  • Page 37: Wiring (3)

    12.4. Wiring (3) 12.5. Wiring (4)

  • Page 38: Wiring (5)

    12.6. Wiring (5)

  • Page 39: Wiring (6)

    12.7. Wiring (6)

  • Page 40: Wiring (7)

    12.8. Wiring (7)

  • Page 41: Wiring (8)

    12.9. Wiring (8)
  • Page 42 Model No. : TC-P55VT60 Exploded View 1 1 / 3...
  • Page 43 Model No. : TC-P55VT60 Exploded View 2 2 / 3...
  • Page 44 Model No. : TC-P55VT60 Accessories 3 / 3...
  • Page 45 Print Parts List Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TXN/A1UEUUS CIRCUIT BOARD A 1 (RTL) PAVCA TXNC31UEUUS CIRCUIT BOARD C3 1 (RTL) PAVCA TZRNP06UEUU CIRCUIT BOARD C1 1 (RTL) PAVCA...
  • Page 46 C0905 F1G1H390A834 C 39 pF 50 V 1 PAVCA C2000 F1G1E103A059 C 0.01UF 25V C2001 F1J1A106A043 C 10UF, 10V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C2002 F1J1E105A287 C 1UF, 25V...
  • Page 47 C 1UF 10V C5015 F1G1A105A047 C 1UF 10V C5016 F1G1A105A047 C 1UF 10V C5017 F1G1A105A047 C 1UF 10V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C5018 F1G1C104A077 C 0.1UF 16V...
  • Page 48 Print Parts List Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C8231 F1G1C104A077 C 0.1UF 16V C8232 F1G1C104A077 C 0.1UF 16V C8233 F1G1C104A077 C 0.1UF 16V C8234 F1G1C104A077 C 0.1UF 16V...
  • Page 49 F1G1H151A834 C 150PF, 50V 1 PAVCA C9235 F1G1E104A145 C 0.10pF 25V 1 PAVCA C9237 F1J0G2260001 C 22 UF 4 V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9238 F1J0G2260001 C 22 UF 4 V...
  • Page 50 C 10UF, 10V C9415 F1J1A106A043 C 10UF, 10V C9416 F1G1C104A077 C 0.1UF 16V C9417 F1J1A106A043 C 10UF, 10V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9418 F1G1C104A077 C 0.1UF 16V...
  • Page 51 C16263 ECJ1VB1H472K C 4700PF, 50V C16271 F2A1E221B726 E 220UF, 25V 1 PAVCA C16280 F1K1E105A029 C 1UF, 25V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C16281 ECJ1VB1E104K C 0.1 UF, 25V...
  • Page 52 F2A1E221B726 E 220UF, 25V 1 PAVCA C16793 F2A1E221B726 E 220UF, 25V 1 PAVCA C16794 F1J1A106A087 C 10UF, 10V Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C16795 F2A1E221B726 E 220UF, 25V...
  • Page 53 55P CONNECTOR K1MY55B00001 55P CONNECTOR K1MY55B00001 55P CONNECTOR K1MY55B00001 55P CONNECTOR K1MY55B00001 55P CONNECTOR K1MY55B00001 55P CONNECTOR Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks K1MY55B00001 55P CONNECTOR K1MY55B00001 55P CONNECTOR...
  • Page 54 DIODE D16192 DA2J10100L DIODE D16196 DZ2J051M0L ZENER DIODE D16243 DA3X103E0L DIODE D16251 DZ2J330M0L ZENER DIODE Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks D16252 DZ2J330M0L ZENER DIODE D16254A B3ABB0000381 1 PAVCA...
  • Page 55 F102 K5E502YYA162 FUSE 1 PAVCA IC100 C0DBBYY00025 1 PAVCA IC200 C0DBBYY00047 1 PAVCA IC300 C0DBBYY00034 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks IC400 C0DBZYY00531 1 PAVCA IC501 C0DBGYY02978...
  • Page 56 1 PAVCA IC16561 C1ZBZ0004566 1 PAVCA IC16563 C0JBAB000996 IC16600 C1ZBZ0004559 1 PAVCA IC16603 C0JBAA000344 IC16725 C1ZBZ0004715 1 PAVCA IC16784 MIP3910MSSCF Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks IC16785 C0DBZYY00532 1 PAVCA...
  • Page 57 FUSE PA8702 K5H1022A0031 FUSE PC400 B3PAA0000629 1 PAVCA PC500 B3PAA0000629 1 PAVCA PC501 B3PAA0000629 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks PC502 B3PAA0000629 1 PAVCA PC700 B3PAA0000629 1 PAVCA...
  • Page 58 B1ABCF000231 TRANSISTOR Q4701 B1ABCF000231 TRANSISTOR Q4750 B1ABCF000231 TRANSISTOR Q8100 B1CFRD000100 1 PAVCA Q8101 B1CFRD000100 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks Q8771 B1HFCEA00001 TRANSISTOR Q9201 B1HFCEA00001 TRANSISTOR Q9500...
  • Page 59 R018 D0GF334JA048 M 330KOHM,J,1/4W 1 PAVCA R068 D0GAR00J0005 M 0 OHM, 1/16W R074 D0GAR00J0005 M 0 OHM, 1/16W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R102 D0GB752JA065 M 7.5KOHM J 1/10W...
  • Page 60 M 0.22OHM, J,1/4W 1 PAVCA R617 D1JBR100A079 M 0.1OHM, J,1/2W 1 PAVCA R618 D1JBR220A079 M 0.22OHM, J,1/4W 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R700 D0GB511JA065 M510 OHM J 1/10W...
  • Page 61 D0GA360JA023 M 36 OHM, J,1/16W R0953 D0GA101JA039 M 100 OHM, J,1/16W 1 PAVCA R0954 D0GA101JA039 M 100 OHM, J,1/16W 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R957 D0GA272JA023 M 2.7KOHM, J.1/16W...
  • Page 62 Print Parts List R3117 D0GA102JA039 M1KOHM, J.1/16 W 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R3118 D0GA473JA039 M 47KOHM, J,1/16W 1 PAVCA R3197 D1BA1403A023 M 140 KOHM,F.1/16 W...
  • Page 63 D1H82204A042 NETWORK RESISTER 1 PAVCA R8314 D1H82204A042 NETWORK RESISTER 1 PAVCA R8315 D1H82204A042 NETWORK RESISTER 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8316 D1H82204A042 NETWORK RESISTER 1 PAVCA...
  • Page 64 1 PAVCA R8679 D0GA273JA023 M 27K OHM J ,1/16W R8682 D0GA680JA023 M 68 OHM, J,1/16W R8683 D0GA472JA023 M 4.7KOHM, J,1/16W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8686 D1BA30R0A023 M 30 OHM,F. 1/16 W...
  • Page 65 D1H82204A042 NETWORK RESISTER 1 PAVCA R9512 D1H82204A042 NETWORK RESISTER 1 PAVCA R9513 D1H82204A042 NETWORK RESISTER 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R9514 D1H83304A042 NETWORK RESISTER 1 PAVCA...
  • Page 66 1 PAVCA R16001 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16002 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16021 D0GF7R5JA047 M 7.5 OHM,J, 1/3W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16023 D0GF7R5JA047 M 7.5 OHM,J, 1/3W...
  • Page 67 D1BD2700A066 M 270 OHM,F.1/8W 1 PAVCA R16412 D1BD2700A066 M 270 OHM,F.1/8W 1 PAVCA R16414 D0GA103JA023 M10KOHM, J.1/16 W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16416 D0GA103JA023 M10KOHM, J.1/16 W...
  • Page 68 M 2.7 OHM,F.1/8W 1 PAVCA R16932 D0GD223JA052 M 22KOHM,J,1/8W R16937 D0GA184JA023 M 180KOHM J.1/16W R16939 D0GA472JA023 M 4.7KOHM, J,1/16W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16940 D0GA472JA023 M 4.7KOHM, J,1/16W...
  • Page 69 NETWORK RESISTER 1 PAVCA R17301 D0GD224JA052 M 220KOHM,J,1/8W R17304 D0GB470JA065 M 47 OHM,J,1/10W R17305 D0GB470JA065 M 47 OHM,J,1/10W Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R17307 D0GB101JA065 M 100 OHM,J,1/10W...
  • Page 70 TERMINAL ZA600 K4AD01A00002 TERMINAL ZA601 K4AD01A00002 TERMINAL ZA602 K4AD01A00002 TERMINAL ZA16001 K4AD01D00020 TERMINAL 1 PAVCA Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks ZA16002 K4AD01D00020 TERMINAL 1 PAVCA ZA16101 K4AD01D00019 TERMINAL...
  • Page 71 TPDX0033 JOINT 4 PAVCA TPE2AH01161 PLASTIC BAG FOR AC CORD 1 PAVCA INSTRUCTION BOOK(ENGLISH/SPANISH/FR TQB2AA0707 1 PAVCA ENCH) Model No. : TC-P55VT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TQD2A19069 QUICK START GUIDE 1 PAVCA...

Table of Contents