Provape PROCYON Owner's Manual page 6

level to 2, 3, 4 or 5 will increase the amount of time the device boosts the power before it drops down to
your selected 9 watts. Note that turning the ProVari up to max wattage and boosting up to 5 will not
exceed the maximum output of the unit, which is up to 50 watts.
Boost 1 - .25 seconds
Boost 2 – .50 seconds
Boost 3 – .75 seconds
Boost 4 – 1.00 seconds
Boost 5 – 1.25 seconds
● The OTS (Onboard Troubleshooting System) keeps the user informed if there is a problem and how to
resolve the issue with clear instructions. If there is a problem detected, the Procyon will display the error
on the screen along with a recommended fix.
● The battery gauge on the Procyon measures the remaining voltage left in the battery and displays this
with a graphic icon. This measurement is a loaded voltage reading of the battery.
● Smart safety features built-in provide the highest level of safety available.
● The Amperage limiting system protects against over-current situations. The Procyon is capable of
outputting up to 50 watts. If you want to use the Procyon at maximum power, you will need to ensure you
use the approved batteries sold by ProVape. If you install a battery that cannot safely handle the full
power output, the Procyon will not allow the device to work at those levels and the power limit will be
reduced. Our number one mission is safety. If you use a subpar battery that can be damaged or if that
battery is not capable of handling that kind of output power, the ProVari will prevent damage to the device
and the user. Always use the approved batteries we offer on our website with the ProVari Procyon.
People often try to save some money by using a cheap battery and this causes issues because not all
batteries are made equally. This is why we recommend you only use the batteries that are tested and
approved by ProVape to work with the Procyon.
● Thermal monitoring shuts the device off if it detects a high temperature condition. If the ProVari Procyon
ever detects that the internal temperature is reaching a dangerous level, it will turn off and alert you on
the screen that you need to remove the battery and let the device cool down before using it again.
● Left & Right handed mode allows the user to select which way the display reads. This useful feature
allows the user to select if they want to flip the screen for left or right handed operation.
● Check All mode allows the user to see all their critical settings at a quick glance. The Check All feature
shows an at-a-glance screen when you press the button once. This shows you the remaining power left in
the battery, the heating element resistance, and your current power level. If the atomizer is not installed or
there is a problem with the heating element, you will get an OP reading meaning OPEN. The device does
not see the atomizer installed when this appears. Try changing out the coil or atomizer and try again. The
check all menu can be turned off and you can also adjust the amount of time it appears on your screen.
● Save profile - Save all of your favorite settings into 5 available memory slots. The Save and Recall
feature allows you to setup the device with your favorite settings and then save them for easy recall later.
The device will always remember your settings, even when changing batteries. Here's an example: if you
have a vanilla flavored fluid you use at 9 watts and you want the LED color to be white when using this
fluid, you would simply set these preferred settings, go into the menu, and select SAV to profile 1.
Additionally, if you like cinnamon flavored fluid at 9.6 watts and want a red LED while using this fluid, you
would set those parameters, and go to the SAV to profile 2 in the menu. Once you have those two profiles
saved, you can simply go to the Recall menu and select which profile you want to load. This will adjust all
your preferred settings quickly.
● Scroll speed adjust allows the user to select the speed of the scrolling menu. The default scroll speed is
set to 2. Once you get acquainted with the menu system, you may find that the default speed is too slow.
6