Back To The Original Point Automatically; Reset Default Parameter; Online Keyboard Function Definition - Foison C12 User Manual

6.1.5 Back to the original point automatically

When turn on the machine, the carriage will back to the original point automatically.

6.1.6 Reset Default parameter

Generally speaking ,. You do not need change the scales (Set Per Xp=36720
Yp=36650) . If the customer changed this incaution and want to go back to the default
parameter , just reset the deafult parameter as following :
Turn on the machine, LCD will show "Foison Welcome Ver 5.01L", press
setting button) two seconds, then it will appear "RESET", at that time, the machine is
resetting default parameter. See default parameter as following:
"v=400mm f=30"; "Us=600mm Br=38400"; "Xp=367200 Yp=36650".

6.2 Online Keyboard Function Definition

st
1 Level Menu Keyboard Definition
Button Function
Online Online/Offline
Menu Menu Switch
Knife Force Increase
Knife Force Decrease
Cutting Speed Increase
Cutting Speed Decrease
Pause Pause/Resume
Repeat Knife drop/raise
C SERIES USER'S MANUAL
Description
Press once to switch to offline status
Press once and enter into Setting menu
Press once, the knife force increases by 1 , it totally has 160 steps
Press once, the knife force decrease by 1 , it totally has 160 steps
Press once, the cutting speed will increase by 50mm/s
Press once, the cutting speed will decrease by 50mm/s
If either speed or knife force is not optimized, press Pause once to
pause working, after adjusting, press once to resume working
Press once for knife dropping and press again knife raising
(origin
21