Tools Installation - Foison C12 User Manual

5.3 Tools Installation

your finger to preserve injury or
passivetion of knife head.
5.3.1Tool Introduction and Application
Icon
Degree Using scope
big word over 20mm
º
60
Small word below 20mm
º
45
or high precision picture
5.3.2 Adjust the protruding length of the knife top as required for specific cutting media
Superficial material
面材
Correct
5.3.3 (1) Loosen the screw of tool carrier
(2)Assembly the tool with knife into the tool carrier
(3)When the tool is in appropriate position screw it and fix the screw.
Do not touch the knife top with
Series Number Angle
45°
60°
45º
Compare with and
Advantage
More attrite than 45 degree
and Can cut thick and hard
material
high precision picture is
better than60 degree blade
底纸 Base paper
Tool long protruding
Length of knife point
C SERIES USER'S MANUAL
CAUTION
Application
C12/24/30/48
C12/24/30/48
60º
blade of Foison
the quality of cutting small world and high
precision picture is not better than 45
degree blade
sharply knifepoint, the attrition is not better
than 60 degree and have large wasting when
cutting thick and hard material
Tool short protruding
length of knife point
Disadvantage
17