Table of Contents

Advertisement

Quick Links

HCD-DZ100K/DZ500KF
QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.1 2005.11
HCD-DZ100K/DZ500KF are the amplifier,
DVD/CD and tuner section in DAV-DZ100K/
DZ500KF.
This system incorporates with Dolby*
Pro Logic (II) adaptive matrix surround decoder and the
2
DTS*
Digital Surround System.
*1 Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
*2 Manufactured under license from Digital Theater
Systems, Inc.
"DTS" and "DTS Digital Surround" are trademarks of
Digital Theater Systems, Inc.
TE
L 13942296513
Amplifier section (HCD-DZ100K)
Stereo mode (rated)
Surround mode (reference)
Amplifier section (HCD-DZ500KF)
Stereo mode (rated)
Surround mode (reference)
* Depending on the sound field settings and the source, there may
be no sound output.
Inputs (Analog)
VIDEO
AUDIO IN
Microphone
www
.
Sony Corporation
9-879-838-02
Home Audio Division
2005K02-1
Published by Sony Engineering Corporation
© 2005.11
http://www.xiaoyu163.com
1
Digital and Dolby
55 W + 55 W (3 ohms at 1kHz, DIN)
music power output
Front: 120 W + 120 W (with SS-TS31)
Center*: 120 W (with SS-CT31)
Surround*: 120 W + 120 W
(with SS-TS31B)
Subwoofer*: 120 W (with SS-WS31)
55 W + 55 W (3 ohms at 1 kHz, DIN)
music power output
Front: 143 W + 143 W (with SS-TS46)
Center*: 143 W (with SS-CT46)
Surround*: 143 W + 143 W
(with SS-TS46B)
Subwoofer*: 285 W (with SS-WS42)
Sensitivity: 450 mV
Impedance: 50 kilohms
Sensitivity: 250/125 mV
Impedance: 50 kilohms
Type: Dynamic
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Photo: HCD-DZ100K
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
Q Q
SPECIFICATIONS
3
6 7
1 3
1 5
Super Audio CD/DVD system
Laser
Signal format system
Frequency response (at 2 CH STEREO mode)
Harmonic distortion
Tuner section
System
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
Intermediate frequency
AM tuner section
Tuning range
Antenna (aerial)
Intermediate frequency
SUPER AUDIO CD/DVD RECEIVER
co
.
9 4
2 8
E Model
HCD-DZ300
CDM85-DVBU102
KHM-310CAA/C2NP
0 5
8
2 9
9 4
2 8
Semiconductor laser
(Super Audio CD/DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration: continuous
PAL/NTSC
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
Less than 0.03 %
PLL quartz-locked digital synthesizer
system
87.5 – 108.0 MHz (50 kHz step)
FM wire antenna (aerial)
75 ohms, unbalanced
10.7 MHz
531 – 1,602 kHz (with the interval set at 9 kHz)
AM loop antenna (aerial)
450 kHz
– Continued on next page –
m
9 9
9 9

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-DZ100K

  • Page 1: Service Manual

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 SERVICE MANUAL E Model Ver. 1.1 2005.11 HCD-DZ100K/DZ500KF are the amplifier, DVD/CD and tuner section in DAV-DZ100K/ Photo: HCD-DZ100K DZ500KF. This system incorporates with Dolby* Digital and Dolby Model Name Using Similar Mechanism...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3: Table Of Contents

    HCD-DZ100K/DZ500KF Ver. 1.1 3 7 63 1515 0 TABLE OF CONTENTS SERVICING NOTE 5-5. Schematic Diagram – DMB10 Board (2/4) – ....30 ........... 4 5-6. Schematic Diagram – DMB10 Board (3/4) – ....31 5-7. Schematic Diagram – DMB10 Board (4/4) – ....32 GENERAL ..............
  • Page 4: Servicing Note

    To prevent a malfunction, the system has performed the self- (xx is a number) diagnosis function. ,Contact your nearest Sony dealer or local authorized Sony u163 service facility and give the 5- character service number. Example: E 61 10 http://www.xiaoyu163.com...
  • Page 5: Electrical Parts List 1 3 1 5 0

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 • SERVICE POSITION (DMB10 BOARD) When servicing side B of the DMB10 board Remove the DMB10 board from bracket. (Refer to DISASSEMBLY 3-6. (page 11)). Set the DMB10 board facing the side B upward as shown.
  • Page 6: General

    HCD-DZ100K/DZ500KF SECTION 2 This section is extracted from instruction manual. 3 7 63 1515 0 GENERAL Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel A "/1 (on/standby) H FUNCTION B Disc tray...
  • Page 7 HCD-DZ100K/DZ500KF 3 7 63 1515 0 D ./> PRESET –/+, TV CH –/+ Remote E H (play) button has a tactile dot.* F TOP MENU G C/X/x/c/ENTER have tactile dots.* C/X/x/c H O RETURN I ALBUM –/+ J ANGLE K AUDIO The AUDIO button has a tactile dot.*...
  • Page 8: Disassembly

    HCD-DZ100K/DZ500KF SECTION 3 3 7 63 1515 0 DISASSEMBLY 3-1. DISASSEMBLY FLOW • This set can be disassembled in the order shown below. • The dotted square with arrow ( ) prompts you to move to the next job when all of the works within the dotted square ( ) are completed.
  • Page 9: Case, Front Panel Assy

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE, FRONT PANEL ASSY 4 screw (CASE3 TP2) 6 five screws (+BV 3) 7 case qd froating screw (PTPWHM 2.6) qf IPOD board...
  • Page 10: Fl Board

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-3. FL BOARD 1 knob (vol) 2 nut q; connector 2p(CN804) 5 shield (front) qa FL board 9 connector 4p(CN805) 3 two sheets 6 t apping screw (DIA.2.6 × 8) 8 wire (flat type)
  • Page 11: I/O Board, Dc Fan

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-5. I/O BOARD, DC FAN 3 wire (flat type) 13p(CN4802) 7 wire (flat type) 23p(CN601) qh I/O board qs wire (flat type) 11p(CN101) 9 connector qf tuner unit (CN300) qd two screws (+BV 3)
  • Page 12: Main Board

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-7. MAIN BOARD 1 two screws (+BV 3) 2 screw (BVTP 3 × 12) 3 heat sink (AMP) 6 wire (flat type) 23p(CN507) 5 wire (flat type) 11p(CN505) 7 wire (flat type) 11p(CN504)
  • Page 13: Dvd Mechanism Deck (Cdm85-Dvbu102)

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-8. DVD MECHANISM DECK (CDM85-DVBU102) 1 t hree screws (+BV 3) 2 DMB bracket 3 three screws (+BV 3) 6 DVD mechanism deck (CDM85-DVBU102) 5 connector 4 wire (flat type) 13p L 13942296513 3-9.
  • Page 14: Belt, Ms-203 Board

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-10. BELT, MS-203 BOARD 2 chuck cam 3 belt 4 screw (M 1.7 × 2.5) 1 two claws L 13942296513 7 MS-203 board 6 DC motor 5 three claws u163 http://www.xiaoyu163.com...
  • Page 15: Base Unit (Dvbu102)

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 3-11. BASE UNIT (DVBU102) 3 two claws 2 chuck cam 1 two claws 4 base unit (DVBU102) L 13942296513 3-12. OPTICAL PICK-UP (KHM-310CAA/C2NP) 2 loading base 5 two insulators 3 four insulator screws...
  • Page 16: Test Mode

    HCD-DZ100K/DZ500KF SECTION 4 3 7 63 1515 0 TEST MODE 3. Disc Tray Lock Note 1: Regarding the notification symbol “R” The disc tray lock function for the antitheft of an demonstration Because the number of the operating buttons of this product disc in the store is equipped.
  • Page 17 HCD-DZ100K/DZ500KF 3 7 63 1515 0 4-4. MIRROR TIME ADJUSTMENT DVD SECTION 4-1. GENERAL DESCRIPTION To enter Mirror Time Adjustment, press 5 “R” button on the remote commander. The screen will appear as below. The Mirror Time and IOP measurement allows you to make...
  • Page 18 HCD-DZ100K/DZ500KF 3 7 63 1515 0 (3) Select “5. MIRR time Adjust”. (14) Confirm the same values are displayed. If it is not same, return to step 7. Drive Manual Operation MIRR time Adjust Menu 1. Servo Control 2. Track/Layer Jump 1.
  • Page 19 HCD-DZ100K/DZ500KF 3 7 63 1515 0 4-5. EXECUTING IOP MEASUREMENT (5) Wait until a hexadecimal number appear. Manual Adjust In order to execute mirror time adjustment, the following standard procedures must be followed. 1. Track Balance Adjust: 2. Track Gain Adjust: (1) In standby mode, press three buttons x , A and VOLUME 3.
  • Page 20: Electrical Adjustment

    HCD-DZ100K/DZ500KF Ver. 1.1 3 7 63 1515 0 ELECTRICAL ADJUSTMENT Checking Location: DMB10 board (Side A) DVD SECTION [TEST DISC LIST] Use the following test disc on test mode. • CD: YEDS-18 (PART No. 3-702-101-01) PATD-012 (PART No. 4-225-203-01) •...
  • Page 21: Diagrams

    HCD-DZ100K/DZ500KF SECTION 5 DIAGRAMS 3 7 6 3 1 5 1 5 0 • Waveforms THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. – DMB10 Board – – I/O Board – (In addition to this, the necessary note is printed in each block.)
  • Page 22: Block Diagram - Rf/Servo Section

    HCD-DZ100K/DZ500KF 5-1. BLOCK DIAGRAM – RF/SERVO SECTION – 3 7 6 3 1 5 1 5 0 DVDRFIP DVDA DVDB DETECTOR DVDC DVDD 8 NA 9 NB IC102 (1/3) CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP OPTICAL PICK-UP DVD SYSTEM PROCESSOR •...
  • Page 23: Video Section

    HCD-DZ100K/DZ500KF – VIDEO SECTION – 3 7 6 3 1 5 1 5 0 YOUT COUT S VIDEO(DVD ONLY) J201 MONITOR OUT VOUT IC204 VIDEO SWITCH YOUT VIDEO OUT2 COUT J601 (1/2) OUT3 VIDEO IN YUV1 YUV2 IC201 VIDEO AMP, 75Ω DRIVER...
  • Page 24: Dsp Section

    HCD-DZ100K/DZ500KF – DSP SECTION – IC4501 3 7 6 3 1 5 1 5 0 BUFFER LRCK0 BCK0 IC506 IC507 DIGITAL AUDIO ALRCK SD-RAM PROCESSOR ABCK ACLK 72-75 7-10 77-80 13-16 ASDATA0 D0-D15 98,99 D0 – D15 IC4502 29-32...
  • Page 25: Audio Section

    HCD-DZ100K/DZ500KF – AUDIO SECTION – 3 7 6 3 1 5 1 5 0 • Signal Path : AUDIO IC108 STREAM PROCESSOR IC101 SPEAKER POWER DRIVER D1 – D3, SCK, BCKO, LRCKO 31 DATA 2 PWMBP OUTR1 OUTB SECTION...
  • Page 26: Power Section

    HCD-DZ100K/DZ500KF – POWER SECTION – 3 7 6 3 1 5 1 5 0 T901 D901 TRANSFORMER(MAIN) AC IN D931 IC901 D905 +31.5V Q901 AC/DC DC/DC POWER CONVERTER CONVERTER ON/OFF IC931 T801 VOLTAGE DETECT PC901 TO FLUORESCENT PHOTO RECT...
  • Page 27: Printed Wiring Board - Dmb10 Board (Side A)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-2. PRINTED WIRING BOARD – DMB10 BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 DMB10 BOARD ( SIDE A ) ✩ IC103 is a written in and settled EEPROM. Supply with a single article has not been carried out.
  • Page 28: Printed Wiring Board - Dmb10 Board (Side B)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-3. PRINTED WIRING BOARD – DMB10 BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 DMB10 BOARD ( SIDE B ) • Semiconductor Location Ref.
  • Page 29: Schematic Diagram - Dmb10 Board (1/4)

    HCD-DZ100K/DZ500KF 5-4. SCHEMATIC DIAGRAM – DMB10 BOARD (1/4) – 3 7 6 3 1 5 1 5 0 CN401 FL401 FB402 FB404 DMB10 BOARD FL403 FB403 FB406 (2/4, 3/4, 4/4) (Page 30, 31, 32) C402 C403 MAIN BOARD 6.3V...
  • Page 30: Schematic Diagram - Dmb10 Board (2/4)

    HCD-DZ100K/DZ500KF • See page 59 for IC Pin Function Description. • See page 21 for Waveforms. 5-5. SCHEMATIC DIAGRAM – DMB10 BOARD (2/4) – 3 7 6 3 1 5 1 5 0 DMB10 BOARD (1/4) DMB10 BOARD DMB10 BOARD...
  • Page 31: Schematic Diagram - Dmb10 Board (3/4)

    HCD-DZ100K/DZ500KF 5-6. SCHEMATIC DIAGRAM – DMB10 BOARD (3/4) – 3 7 6 3 1 5 1 5 0 ✩ IC103 is a written in and settled EEPROM. Supply with DMB10 BOARD DMB10 BOARD a single article has not been carried out. In case you...
  • Page 32: Schematic Diagram - Dmb10 Board (4/4)

    HCD-DZ100K/DZ500KF 5-7. SCHEMATIC DIAGRAM – DMB10 BOARD (4/4) – 3 7 6 3 1 5 1 5 0 DMB10 BOARD (2/4) (Page 30) DMB10 BOARD (1/4, 2/4, 3/4) (Page 29, 30, 31) R225 R223 100k 100k R232 R231 R234...
  • Page 33: Printed Wiring Board - Main Board (Side A)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-8. PRINTED WIRING BOARD – MAIN BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor MAIN BOARD (SIDE A) Location Ref. No.
  • Page 34: Printed Wiring Board - Main Board (Side B)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-9. PRINTED WIRING BOARD – MAIN BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 SPEAKER • Semiconductor FRONT:ONLY FOR SS-TS46 SURROUND:ONLY FOR SS-TS46B...
  • Page 35: Schematic Diagram - Main Board (1/9)

    HCD-DZ100K/DZ500KF • See page 56 for IC Pin Function Description. • See page 21 for Waveform. 5-10. SCHEMATIC DIAGRAM – MAIN BOARD (1/9) – 3 7 6 3 1 5 1 5 0 FL BOARD (Page 45) CN509 D_CLK...
  • Page 36: Schematic Diagram - Main Board (2/9)

    HCD-DZ100K/DZ500KF 5-11. SCHEMATIC DIAGRAM – MAIN BOARD (2/9) – 3 7 6 3 1 5 1 5 0 MAIN BOARD (1/9) (Page 35) IC515 TA7809LS C595 C597 C596 0.33 47 35V R704 R703 MAIN BOARD (9/9) IC516 (Page 43)
  • Page 37: Schematic Diagram - Main Board (3/9)

    HCD-DZ100K/DZ500KF • See page 52 for IC Block Diagrams. • See page 21 for Waveform. 5-12. SCHEMATIC DIAGRAM – MAIN BOARD (3/9) – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3...
  • Page 38: Schematic Diagram - Main Board (4/9)

    HCD-DZ100K/DZ500KF • See page 21 for Waveform. 5-13. SCHEMATIC DIAGRAM – MAIN BOARD (4/9) – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3 HCD-DZ100K/DZ500KF http://www.xiaoyu163.com...
  • Page 39: Schematic Diagram - Main Board (5/9)

    HCD-DZ100K/DZ500KF • See page 51 for IC Block Diagram. 5-14. SCHEMATIC DIAGRAM – MAIN BOARD (5/9) – 3 7 6 3 1 5 1 5 0 R345 R347 R468 R469 R317 EB910 C324 C323 R316 EB907 R319 R382 R381...
  • Page 40: Schematic Diagram - Main Board (6/9)

    HCD-DZ100K/DZ500KF • See page 51 for IC Block Diagrams. 5-15. SCHEMATIC DIAGRAM – MAIN BOARD (6/9) – 3 7 6 3 1 5 1 5 0 DZ500KF R384 R480 R383 IC106 C137 R120 CXD9774M (DZ100K) R128 CXD9775M (DZ500KF) C116...
  • Page 41: Schematic Diagram - Main Board (7/9)

    HCD-DZ100K/DZ500KF • See page 51 for IC Block Diagrams. • See page 21 for Waveform. 5-16. SCHEMATIC DIAGRAM – MAIN BOARD (7/9) – 3 7 6 3 1 5 1 5 0 MAIN BOARD (5/9) (Page 39) L107 10uH...
  • Page 42: Schematic Diagram - Main Board (8/9)

    HCD-DZ100K/DZ500KF • See page 51 for IC Block Diagrams. 5-17. SCHEMATIC DIAGRAM – MAIN BOARD (8/9) – 3 7 6 3 1 5 1 5 0 MAIN BOARD (6/9) (Page 40) IC103 Q106 Q108 CXD9774M (DZ100K) 2SA1235-F 2SA1235-F C113...
  • Page 43: Schematic Diagram - Main Board (9/9)

    HCD-DZ100K/DZ500KF 5-18. SCHEMATIC DIAGRAM – MAIN BOARD (9/9) – 3 7 6 3 1 5 1 5 0 MAIN BOARD (6/9) R930 0 (Page 40) R924 MAIN BOARD C938 (8/9) 680P D931 250V (Page 42) YG906C2R *1 R931 C963...
  • Page 44: Printed Wiring Board - Panel Section (1/2)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-19. PRINTED WIRING BOARD – PANEL SECTION (1/2) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 STBY BOARD KEY BOARD (11) 1-865-320- (11) 1-865-318- FUNCTION...
  • Page 45: Schematic Diagram - Panel Section (1/2)

    HCD-DZ100K/DZ500KF • See page 53 for IC Block Diagram. 5-20. SCHEMATIC DIAGRAM – PANEL SECTION (1/2) – 3 7 6 3 1 5 1 5 0 S804 S805 S806 S802 S803 S808 S807 R853 R854 R851 R855 R856 R857...
  • Page 46: Printed Wiring Board - Panel Section (2/2)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-21. PRINTED WIRING BOARD – PANEL SECTION (2/2) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 MIC BOARD (SIDE B) IPOD BOARD (SIDE B) MS-203 BOARD...
  • Page 47: Schematic Diagram - Panel Section (2/2)

    HCD-DZ100K/DZ500KF 5-22. SCHEMATIC DIAGRAM – PANEL SECTION (2/2) – 3 7 6 3 1 5 1 5 0 R670 R671 R683 C639 R643 R605 C646 CNP602 R668 0.001 4.7k R666 4.7k J603 C637 R677 100p 100k R621 C638 R678...
  • Page 48: Printed Wiring Board - I/O Board (Side A)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-23. PRINTED WIRING BOARD – I/O BOARD (SIDE A) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 I/O BOARD (SIDE A) • Semiconductor Location Ref. No.
  • Page 49: Printed Wiring Board - I/O Board (Side B)

    HCD-DZ100K/DZ500KF • See page 21 for Circuit Boards Location. 5-24. PRINTED WIRING BOARD – I/O BOARD (SIDE B) – :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 MONITOR OUT S VIDEO COMPONENT (DVD ONLY) VIDEO OUT...
  • Page 50: Schematic Diagram - I/O Board

    HCD-DZ100K/DZ500KF • See page 54, 55 for IC Block Diagrams. 5-25. SCHEMATIC DIAGRAM – I/O BOARD – 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 w w w...
  • Page 51 HCD-DZ100K/DZ500KF 3 7 63 1515 0 • IC Block Diagrams – MAIN Board – IC101-107 CXD9774M GVDD B GVDD GVDD B BST B DVDD DREG DREG GND 1 PVDD B GATE PWM BP 2 PVDD B RECEIVER DRIVE OUT B...
  • Page 52 HCD-DZ100K/DZ500KF 3 7 63 1515 0 IC505 LC89056W-E AUDIO C BIT PA/PB DETECT DETECT EMPHA SAMPLING FREQUENCY MICROCOMPUTER INTERFACE XSEL XOUT LOCK CLOCK DETECT XMCK 19 DVDD MODE0 MODE 18 DGND SELECT MODE1 XSTATE DGND DATAO DVDD LRCK DOSEL0...
  • Page 53 HCD-DZ100K/DZ500KF 3 7 63 1515 0 – FL Board – IC802 uPD16315GB-3BS Grid driver Multiplexed driver SEG19/GRID10 Command decoder LED1 SEG18/GRID11 LED2 Display memory LED3 SEG17/GRID12 24 bits x 12 words LED4 Timing generator key scan L 13942296513 DOUT...
  • Page 54 HCD-DZ100K/DZ500KF 3 7 63 1515 0 – I/O Board – IC201 MM1623BFBE S-DC out 28 V S1/S2 150Ω Bias 200Ω 27 S-DC 75Ω MUTE1 26 C Driver – 6dB 6.75MHz Clamp CVBS 25 S1 YC mix. 24 S2 Clamp 75Ω...
  • Page 55 HCD-DZ100K/DZ500KF 3 7 63 1515 0 IC203 NJM2235V (TE2) IC601 MC14052BDR2 IN 1 BUFFER SW 1 IN 2 BIAS SW 2 VIN 3 IC204 NJM2285V-TE2 IN1A GND1 IN2B CTL2 IN2A GND3 IN3B Bk`loSxod Ah`rSxod Bk`loSxod L 13942296513 IN1B CTL1...
  • Page 56 HCD-DZ100K/DZ500KF 3 7 63 1515 0 • IC Pin Function Description MAIN BOARD IC509 M30622MGP-A17FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP SCDT/ Digital amp (IC108 to 110) data output DIAT_SDATA DAMP SHIFT/ Digital amp (IC108 to 110) data output (not used)
  • Page 57 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description CE/STBY_LED Flash Write CE (not used) DRIVE_RST(EN) Driver signal reset DRIVE_OCP(DIAG) Digital amp (power driver) diag OVERFLOW1 Over flow status1 of digital amp (IC110) OVERFLOW2 Over flow status2 of digital amp (IC108 to 110)
  • Page 58 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description MODEL Model select KEY2 Key input 2 KEY1 Key input 1 — Ground KEY0 Key input 0 VREF — Reference Voltage (+3.3V) — Power supply (+3.3V) M-ST/WMUTE LINK (multi STEREO) control output...
  • Page 59 HCD-DZ100K/DZ500KF 3 7 63 1515 0 DMB10 BOARD IC102 CXD9804R (CD/DVD RF AMP, FOCUS/TRACKING ERR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description AGND — Terminal Ground DVDA AC coupled input path A DVDB AC coupled input path B...
  • Page 60 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description Not Used Not Used Not Used MAMUTE MAMUTE signal output to System Controller (IC509) (not used) DVDD18 — Power Supply (+1.8V) 53 to 58 IOA 2 to 7...
  • Page 61 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description IR control signal input (not used) INT0 External interrupt0 (not used) DQMO DQM0 signal output to SD-RAM (IC104) MREQ DQM signal input Data bus 7 from SD-RAM (IC104) DVSS —...
  • Page 62 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description — Not Used DVDD18 — Power Supply (+1.8V) — Not Used DVSS — Terminal Ground LIMSW LIMSW signal output to Optical pick-up OCSW SEN signal input from System Controller (IC509)/OCSW signal input VCLK —...
  • Page 63 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Pin No. Pin Name Description ASDATA2 Auio serial data XRST — Not Used DVDD18 — Power Supply (+1.8V) ASDATA4 Auio serial data (not used) DVSS — Terminal Ground DWIDE — Not Used SDPIF —...
  • Page 64: Exploded Views

    HCD-DZ100K/DZ500KF SECTION 6 3 7 63 1515 0 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.
  • Page 65: Front Panel Assy Section

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 6-2. FRONT PANEL ASSY SECTION not supplied supplied supplied supplied supplied supplied L 13942296513 supplied with S800 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-546-006-01 KNOB (VOL) A-1088-414-A FL BOARD, COMPLETE...
  • Page 66: Chassis Section

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 6-3. CHASSIS SECTION supplied F901 not supplied DVD mechanism L 13942296513 deck section not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-077-331-01 +BV3 (3-CR) 1-830-464-11 WIRE (FLAT TYPE) (23 CORE)
  • Page 67: Dvd Mechanism Deck Section

    HCD-DZ100K/DZ500KF 3 7 63 1515 0 6-4. DVD MECHANISM DECK SECTION not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 supplied Ref. No. Part No. Description Remark Ref. No. Part No.
  • Page 68 HCD-DZ100K/DZ500KF Ver. 1.1 SECTION 7 DMB10 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name.
  • Page 69 HCD-DZ100K/DZ500KF DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C212 1-162-970-11 CERAMIC CHIP 0.01uF FL401 1-234-494-21 FILTER, EMI REMOVAL (SMD) C213 1-162-970-11 CERAMIC CHIP 0.01uF FL402 1-233-893-21 FILTER, CHIP EMI...
  • Page 70 HCD-DZ100K/DZ500KF DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R155 1-216-805-11 METAL CHIP 1/10W R1121 1-500-284-21 INDUCTOR, FERRITE BEAD R160 1-216-805-11 METAL CHIP 1/10W R1122 1-500-284-21 INDUCTOR, FERRITE BEAD...
  • Page 71 HCD-DZ100K/DZ500KF DMB10 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < VIBRATOR > < COIL > X101 1-781-867-21 VIBRATOR, CRYSTAL (27MHz) L801 1-410-671-31 INDUCTOR 47uH L802 1-410-671-31 INDUCTOR 47uH ************************************************************* A-1088-414-A FL BOARD, COMPLETE <...
  • Page 72 HCD-DZ100K/DZ500KF 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C217 1-126-933-11 ELECT 100uF < IC > C218 1-115-156-11 CERAMIC CHIP IC201 6-705-602-01 IC MM1623BFBE C219 1-164-156-11 CERAMIC CHIP 0.1uF IC203...
  • Page 73 HCD-DZ100K/DZ500KF IPOD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R607 1-216-841-11 METAL CHIP 1/10W C639 1-126-964-11 ELECT 10uF C640 1-126-964-11 ELECT 10uF R608 1-216-841-11 METAL CHIP 1/10W R609 1-216-817-11 METAL CHIP...
  • Page 74 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1133-098-A MAIN BOARD, COMPLETE (DZ100K) C166 1-125-898-91 CERAMIC CHIP 0.22uF A-1133-241-A MAIN BOARD, COMPLETE (DZ500KF) C167 1-125-898-91 CERAMIC CHIP 0.22uF...
  • Page 75 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C227 1-136-177-00 FILM C301 1-164-156-11 CERAMIC CHIP 0.1uF (DZ500KF) C302 1-164-156-11 CERAMIC CHIP 0.1uF C248 1-126-947-11 ELECT 47uF C303 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 76 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C505 1-107-826-11 CERAMIC CHIP 0.1uF C583 1-115-467-11 CERAMIC CHIP 0.22uF C587 1-115-467-11 CERAMIC CHIP 0.22uF C506 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 77 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 D924 C952 1-100-756-91 CERAMIC CHIP 0.047uF 8-719-083-69 DIODE UDZSTE-1724B 0 D925 8-719-069-54 DIODE UDZSTE-175.1B C953 1-117-214-11 CERAMIC 0.001uF 0 D926...
  • Page 78 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 IC901 6-707-742-11 IC STR-F6168-LF1352 < LINE FILTER > 0 IC921 6-707-740-01 IC STR-V153 0 LF901 1-457-079-11 LINE FILTER COIL...
  • Page 79 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R139 1-216-864-11 SHORT CHIP R226 1-216-136-00 RES-CHIP 1/8W R141 1-216-864-11 SHORT CHIP R227 1-216-136-00 RES-CHIP 1/8W R142 1-216-864-11 SHORT CHIP...
  • Page 80 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R372 1-216-818-11 METAL CHIP 1/10W R478 1-216-864-11 SHORT CHIP R373 1-216-818-11 METAL CHIP 1/10W R479 1-216-864-11 SHORT CHIP R374 1-216-818-11 METAL CHIP...
  • Page 81 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R550 1-216-864-11 SHORT CHIP R614 1-216-833-11 METAL CHIP 1/10W R551 1-216-821-11 METAL CHIP 1/10W R615 1-216-817-11 METAL CHIP 1/10W R552...
  • Page 82 HCD-DZ100K/DZ500KF MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R764 1-216-809-11 METAL CHIP 1/10W R955 1-216-817-11 METAL CHIP 1/10W R956 1-216-821-11 METAL CHIP 1/10W R765 1-216-809-11 METAL CHIP 1/10W...
  • Page 83 HCD-DZ100K/DZ500KF MS-203 STBY 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > IC604 8-759-649-89 IC MC4558CD < JACK > J602 1-566-891-21 JACK (MIC) < RESISTOR > R647 1-216-833-11 METAL CHIP...
  • Page 84 HCD-DZ100K/DZ500KF 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

This manual is also suitable for:

Hcd-dz500kf

Table of Contents