Foursevens Quark Turbo QB2A Operator's Manual

Model
QB2A
POWER Two AA batteries
(up to 1.5 volts each)
Maximum: 205 lumens
OUTPUT
Moonlight: 0.2 lumen
Runtime at Maximum: 1.3 hours
RUNTIME
Runtime at Moonlight: 30 days
SOS Strobe, S.O.S and Beacon
STROBE
flash modes
Comparison Table
Quark Turbo Models:
QB2A QB2L
Battery Type AA Battery X
Lithium CR123A X
Operating Voltage 0.9-4.2V X
X
3.0-9.0V
Output Modes 5 Regulated Levels
X X
Strobe, SOS, Beacon
X X
Moonlight Mode
X X
Features X X
Fully Knurled
X X
Reversible/Removable Clip
X X
Premium Cree XP-G
Sapphire, AR Coated Lens X X
X X
IPX-8 Waterproofing
X X
T-6061 Aircraft-Grade Aluminum
8 Digitally Regulated Modes X X
X X
Square Threads
10-Year Performance Guarantee X X
Operation
Operating your Quark Turbo QB2A is simple. Insert its batteries with the
positive side (+) toward the head. Make sure the head and tailcap are
tightened, then depress the tailcap button fully so that it 'clicks' and the light
turns on. You can also press the tailcap lightly (you don't have to 'click' it on)
to activate the light momentarily.
Your Quark Turbo can memorize any two modes of output, from its eight
total modes, to be instantly available. These two modes are accessed by
either tightening or loosening the head (for example, tight can be Max, and
loose can be Low).
To have your Quark Turbo memorize a different mode, turn it on and
loosen the head by a half-turn. Then, tighten the head at least four times
rapidly (twist it tight, then loose, then tight, etc., four times). After the fourth
time, leave the head tight or loose, depending which position want to program.
After three seconds, the light will flash. It is now ready to be programmed.
Cycle through the eight available modes by clicking the tailcap off and on.
The mode sequence is as follows:
Moonlight High
Low Medium Max SOS Strobe Beacon
Once you find your desired mode, leave that mode on for ten seconds, and
the light will flash again, confirming the mode has been memorized. To cancel
programming before it flashes, turn off the light for three seconds.
QB2A QB2L
Lumens (out the front) Maximum 205 230
Moonlight 0.2 0.2
1.3 1.5
Output Runtimes Maximum (hours)
Moonlight (days) 30 30
Dimensions Length (in)
6.0 4.9
Diameter (in)
1.18 1.18
Weight (oz) 2.65 3.6
Pro Turbo
Quark Sub-Series:
Momentary Activation Yes
Yes
Protruding Tail Button
Stands on Tail (Candlemode) Yes
8 8
Available Output Levels
2 1(user-defined)
Levels with Tightened Bezel
6 1(user-defined)
Levels with Loosened Bezel
Level Memorization Yes

Specifications

Dimensions Power Source
Length:
6.2 in Two AA Batteries
Diameter: 1.18 in Operating Range: 0.9~4.2 V
Weight: 3.6 oz
Typical Output and Runtimes
Output (out the front)
Mode Runtime
Moonlight 0.2 lumens 30 days
Low 4 lumens 5 days
Medium
22 lumens 24 hours
High 85 lumens 5 hours
Max 205 lumens 1.3 hours
Strobe 2.5 hours
Beacon
18 hours
* Beacon mode first flashes 5 times, then once every 10 seconds.
QB2A
OPERATOR'S MANUAL
Warranty
FOURSEVENS warrants its products to be free from defects in materials and
workmanship. We will repair or replace, at our option, without charge any product or
part which is found to be defective under normal use and service within 120 months
from the date of purchase with proof of purchase. Such repair or replacement shall
be the purchaser's sole and exclusive remedy under this warranty. This warranty
does not cover normal maintenance and service and does not apply to any products
or parts which have been subject to modification, misuse, abuse, negligence,
accident, or improper maintenance or repair by anyone other than FOURSEVENS
4Sevens, LLC
5117 S Royal Atlanta Drive
Tucker, GA 30084
678.608.0308
customerservice@4Sevens.com
www. foursevens .com
.