Advertisement
Quick Links
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Handle operates counterclockwise through a 270˚ arc with off
at 6 o'clock and maximum hot at the 9 o'clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
• EP suffix models are IAPMO Green listed and third party certified to
WaterSense®
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
3-1/2"
(89mm)
7-1/2" (191mm)
ESCUTCHEON
DIAMETER
7-1/2"
(191mm)
MIN
HOT
COLD
INLET
INLET
2-1/2"
(63mm)
M•Pact™ System
T2133sp: Rev. 4/10
2" CC (51mm)
1-7/8" IPS (48mm)
FACE OF STUD
MAX WALL
FINISHED WALL LINE
7-13/16"
(199mm)
3-7/8" (99mm)
4-1/2" (114mm)
WALL OPENING
7"
(178mm)
FLOOR
TUB RIM
THICK WALL APPLICATION
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
Single-Handle Tub/Shower Trim Kit
Models: T2131 series - valve trim only
Valves: 62300 series
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
2-1/2" MAX. (63mm)
L C
(1981mm)
1-3/8" (35mm)
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
EVA™ POSI-TEMP
®
T62131 (Bulk Packed 12 per carton)
T2132 series - shower trim only
T62132 (Bulk Packed 12 per carton)
T2133 series - tub/shower trim
T62133 (Bulk Packed 12 per carton)
2500 series
EP Suffix Models Only
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
6'-6"
FLOOR LINE
THIN WALL APPLICATION
www.moen.com
3/16" (typ) (5mm)
PLASTER GROUND
1 1/2"
(38mm)
L C
1 3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Advertisement
