Moen MONTICELLO T3132 Specifications

DESCRIPTION
• Metal construction with a chrome plated,
decorative glacier or LifeShine
• Pressure balancing valve design with integral
check stops, 1/2" CC connections
OPERATION
• Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
HOT
INLET
7-1/2"
(191mm)
MIN.
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
®
® polished brass finish
FINISHED WALL LINE
7" (178mm)
ESCUTCHEON
DIAMETER
ESCUTCHEON
5-1/2" (140mm)
WALL OPENING
COLD
INLET
LEVER HANDLE
(Handle inserts
not furnished)
TUB RIM
CRITICAL DIMENSIONS
(DO NOT SCALE)

Specifications

ADA
MONTICELLO ® MOENTROL
Single-Handle Tub/Shower Trim Only
Models: T3133, T3133P, T3133W
(Bulk Packed 12 per carton)
T3132, T3132P, T3132W
(Packed 1 per carton)
NOTE: See reverse side for illustrated
parts and optional handle inserts
1-15/16"(49mm) MIN.
2-9/16" (65mm) MAX.
1" (25mm)
1-1/4" (32mm)
L C
45" (1143mm)/
48" (1219mm)- SHOWER
32" (813MM) - TUB OR
TUB SHOWER
FLOOR
ADA symbol applies to shower
valve control only.
®
6'-6"
(1981mm)
Rev. 1/00