The cd player will fit into every environment Before you start using your Joy cd player thanks to its wide range of output and Player, we recommend that you take a control options.
Only use the mains cable supplied. The unit’s power supply and connections values (mains voltage, frequency) must be checked before connecting it to the mains. Scope of delivery Joy CD Player (1x) Power cable (1x) Coaxial cable (1x) Power cable Quick-Reference-Guide ...
Do not expose the device to splash loops. With these network receivers water or high levels of humidity. Do not however, Revox uses the ground cable stand containers filled with liquid, e.g. for the reduction of noise fields. For flower vases, on the device.
In order to exclude the risk of an electric is unstable shock, do not remove the housing. Only has high humidity have repair work carried out by a Revox specialist dealer. The guarantee covers the intended usage of the unit.
Introduction Regulations pertaining to the unit In EU and EEC countries, Revox offers a guarantee on units bought in the EU, over and above the statutory rights of guarantee claims against the seller. The guarantee covers material and labour...
Green : Search forward/reverse / corresponding control commands in the Shuffle / Repeat databases of the Revox M208 and S208 : Fault system remote controls. As an option, the Revox RC M100 Remote control can also be ordered under the Part number: 1.553.095.00...
Function AC Power Power cable connection 100-240 VAC ~ / 50-60 Hz Analogue Output* Fixed analogue audio output, e.g. for Joy Network Receiver Coaxial Output * Fixed digital audio output over a coaxial cable . 44.1 kHz CD-Link RJ45 link connection for future applications...
Operation cd player Operation Operation through the front panel The blue standby LED on the glass front panel lights up after you have made all necessary connections switched the CD player on through the switch on the rear of the device. Now, you can switch the device on by lightly tapping on the Power button.
Operation Operation with remote control The Joy CD Player is equipped for operation through IR signals. Three Revox remote controls are available, RC M100, M208, S208, which include all commands for controlling the CD player. There is an overview of the button layouts of these remote controls starting from Page 11.
Operation cd player RC M100 (optional) The function buttons on the optional RC M100 Remote control always reference the previously selected source button. Therefore, the DVD source must be selected for the CD player before operating the function buttons. Button IR Function Switch CD player off Switch CD player on with [DVD]...
The optional M208 Remote control from Revox has a pre-defined CD player device in its configuration M208 Project Manager programme , which can be used for infrared control of the Joy CD player. The assignment Expert Mode shown below can be modified in required. Button...
Operation cd player S208 (optional) The optional S208 Remote control from Revox has a pre- defined CD player device in its configuration programme M208 EasyCreator , which can be used for controlling the Joy CD Player through infrared. The assignment shown below can be modified if required.
In details, the comfort programming consists of the following components: • Switch-on macro *CD [Switch CD player and receiver on together] • Mixed device CD+Joy [Combination of CD player IR control and bidirectional receiver wireless connection] • Switch-off macro *OFF [Switch CD player and receiver off together] •...
Operation cd player Comfort control operating steps Parallel switch-on with the Hotkey *CD 2) Combi-operation of CD player and Joy Receiver with CD+Joy (Mixed device) Parallel switch-off using the button in the mixed device (CD+Joy) Button Function of the CD+Joy mixed device...
External control Joy CD Player RS232 commands The CD player can be controlled completely, including status feedback, through the green RS232 screw connector. Baudrate: 57600 Data bits: Parity: Stop bits: General All number values are in the HEX format.
Page 19
External control cd player Three target codes are used: 43 Drive 53 Sensor 56 Version RW has no meaning with the drive (always 0) LL just defines the number of data bytes. (Please note: CD Link commands cannot be transmitted over the RS232 interface) Example: Start Play in repeat mode $2 “43 11 00 01 05”...
cd player External control Drive commands 2/2 Name Command Info AC_Get_Tag_XY Get Track 7, Name & Artist : Byte 0 = 0; $2 “43 26 00 04 00 07 FF 03” $3 Byte 1 = Tr Num; A maximum of 2 queries can Byte 2 = 255;...
Appendix cd player Appendix Warranty Environmental protection Warranty covers a period of 24 months Packaging from the purchasing date. Your specialist We recommend keeping the original box dealer is your first contact if you need and packaging material so that if service help.
cd player Appendix Technical Data Analog output Measurement Measuring conditions Frequency range 5 Hz – 20 kHz typ. ± 0,5dB THD + Noise < 0,0019 % 1 kHz Output impedance 220 Ohm Dynamic range 118 dB Mute / 0 dBFS DC-Offset 0,0005 Volt SN ratio...
Supported disc types Pressed audio compact discs Digital CD-R-, CD-RW audio discs The Joy CD player is designed to play As well as pressed, purchased CDs, self- compact discs (CD-DA in accordance burned CD with the following identifiers with RED Book standard with and w/o can be played, with reservations.
Page 26
Appendix User manual Revox Joy cd player...
Need help?
Do you have a question about the Joy and is the answer not in the manual?
Questions and answers