Download Print this page
Creda SF3 Installation Instructions
Creda SF3 Installation Instructions

Creda SF3 Installation Instructions

Advertisement

Quick Links

:
GUARANTEE AND CONTACT DETAILS
GUARANTEE
Terms and Conditions for UK (outside UK contact your local distributor)
In the unlikely event of a product breakdown during the guarantee period you should
contact our Service and Repair Helpline who will be able to assist with the repair and
advise of the best course of action to be taken.
Please DO NOT remove the product prior to making this call as this may invalidate your
guarantee.
Service and Repair Tel: 0844 879 3588 (UK) or 01 842 4833 (R.O.I)
We guarantee this product for a period of 12 months from the date of purchase.
Within the guarantee period we will resolve, free of charge, any manufacturing defects in the product
resulting from faulty workmanship or material on condition that:-
a) The product has been correctly installed and commissioned in accordance with our instructions and
is being used on the supply circuit or voltage printed on the rating plate.
b) The product has been used in accordance with these instructions and has not been tampered with
or otherwise subject to misuse, neglect or accident.
The product has not been taken apart, modified or repaired except by a person authorised by us.
c)
d) Evidence of the date of purchase in the form of an invoice or receipt will be required in order to
qualify under the terms of this guarantee.
e) For the service work to be undertaken free of charge, the work must only be undertaken by us,
or our approved agents.
f) Service under guarantee has no effect on the expiry date.
The guarantee on any exchanged parts or product ends when the original guarantee period ends.
EXCLUSIONS
This guarantee DOES NOT cover damage or defects arising from poor or incorrect installation,
improper use or lack of maintenance.
It is the responsibility of the installer to check that the installation parameters meet the requirements
of the products, and any relevant regulations.
If we are called out to a fault, which is subsequently identified as being an installation fault, we will
make a charge, it is important that the routine checks are completed before calling us out, as many
issues can be simply diagnosed and resolved.
A charge will be made where a call under the terms of the guarantee has been booked and a failure
was not product related, or an engineer arrives and is not able to gain access.
We make no guarantees as to response time for repairs.
We will endeavour to achieve the most timely response possible but while we indicate an average
response time, this should not be taken as a guarantee.
The guarantee applies to a repair or replacement (at our discretion) of the product subject to the
conditions above, and DOES NOT cover compensation for the loss of the product or consequential
loss of any kind.
This guarantee does not apply to the repair or replacement of accessories, isolating switches,
electrical cable, fuses and/or circuit breakers.
This guarantee does not affect your statutory rights.
CREDA HEATING
MILLBROOK HOUSE, GRANGE DRIVE, HEDGE END, SOUTHAMPTON, SO30 2DF
UK - TEL: 0844 879 3588 / FAX: 0844 879 3583 / Website: www.credaheating.co.uk
R.O.I. - TEL: 01 842 4833
We offer a technical advisory service on the telephone:
RING 0844 879 3588 (UK) or 01 842 4833 (R.O.I)
(A4) Leaflet No. 581-2143-08a
8
INSTALLATION INSTRUCTIONS
Model 50816401

Advertisement

loading

Summary of Contents for Creda SF3

  • Page 1 This guarantee does not apply to the repair or replacement of accessories, isolating switches, electrical cable, fuses and/or circuit breakers. This guarantee does not affect your statutory rights. CREDA HEATING MILLBROOK HOUSE, GRANGE DRIVE, HEDGE END, SOUTHAMPTON, SO30 2DF INSTALLATION INSTRUCTIONS UK - TEL: 0844 879 3588 / FAX: 0844 879 3583 / Website: www.credaheating.co.uk...
  • Page 2 (the ‘IET Wiring Regulations’) in force at the time of installation. Installations outside England and Wales must also conform to any local or Additional accessories and spare parts can be supplied by your local Creda distributor, appropriate regulations in effect.
  • Page 3 If the heater is to be installed near an adjacent wall, the heater should be parallel to, or angled away from it, and there should be a minimum gap of 300mm between the adjacent wall and any part of the heater (see Diagram 1.0). The heater MUST NOT be mounted immediately below a fixed electrical socket outlet, neither should it be directed at any surface nearer than 1.5m.
  • Page 4 6. With the wall plate firmly attached to the wall, latch the heater to the wall plate by INSTALLING THE HEATER pushing back and down. Secure the heater to the wall/wall plate using a third No.10 x 1.5” (or longer) round head screw through hole C (see Diagram 2.4). 1.