Fargo FP3320BG Set-Up And Maintenance Instructions Sheet

ELECTRICAL REQUIREMENTS

Table fan requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included. NOT for Damp Location Use.
▲WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.
Maintenance — To Clean Your Fan:
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to nish.
Set-Up and Maintenance Instructions Sheet
Fargo
®
Set Up:
Figure 1
1. Carefully remove from
package.
3. Select the desired airflow,
located on back of fan base by
rotating switch clockwise
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
Figure 2
2. Plug directly into the
socket.
Figure 3
CAUTION