Explanation of symbols Symbol Explanation Enter numbers, keys, password, internal or external numbers, etc. Signaling with a short beep Lift/Replace the handset Start conversation Service Menu Service Menu Programmable key is ON Programmable key deleted Blinking Programmable key Navigation keys <...
Mute/internal key functions as Mute. See the User Manual (A31003-K1160-B801-*) or the HiPath 1100 Manager for information on how to pro- gram keys. Labels for programmable keys can be printed/changed using the "Printing Labels" service on the HiPath 1100 Manager.
< > Select a key Programming a feature for a key feature to be programmed and Redialing Redial Speaker Activate/deactivate speakerphone Speaker Activate/deactivate speaker Speaker Headset Activate/deactivate headset Activate headset qmheh Checking relay status qmhmi p Admin of extension names PIN extension (1 optiPoint with system display) System Speed Dial or extension/group...
qld p Direct communication call extension with a system telephone wait for record message Internal call extension kkd . kkmV Calling a call group (CG) kld . klm Calling a Hunt Group (HG) kmd . kmm UCD subscriber group Urgent call (busy) Wait for (busy extension) Service Menu...
Retrieving a parked call Gen. Parking General Parking Retrieving a parked external line call Service menu Toggle (Use after consultation, for answering a second or urgent call) Suffix dialing data Service menu Retrieving a call on hold if busy or no answer Transfer Internal (When an external analog line pro-...
(HG) Login rli p Call Group (CG) and Hunt Group group (if it belongs to more than one group) (HG) Logout Room monitor (Babyphone) qmhed Music on Hold Music Activation rmhed Music on Hold Deactivation qmmf Remote configuration HiPath 1100 Manager...
Remote configuration 1) The local programming extension is talking to the remote Using an MF telephone programmer: qmme Remote programmer must provide: password programming codes. 2) The remote programmer dials the system and is attended by the Fax/DID feature: qmi p password programming codes.
Group call pickup is done with sequence "*0" instead of "*57" d) Recovery of a parked call is done with sequence "*57" instead of "*0" Note 2: Feature Codes can be changed with the HiPath 1100 Manager. An expert should be consulted in this case.
Page 10
Subject to availability. Right of modification re- in the terms of the contract. served. All trademarks are the property of Siemens Enterprise Communications GmbH & Co. KG 26.01.2007 V6.0 or their respective owners.