Page 1
User's Guide dell.com/regulatory_compliance Dell OptiPlex 780-USFF All In One (AIO) Stand The Dell OptiPlex 780-USFF All-in-One Stand is a unique mounting solution with integrated cable management designed to adapt to your unique environment. 1/15...
Page 3
Contents 1 About your Dell OptiPlex 780-USFF AIO Stand ……………………………………………….. 4 2 Setting up the Dell OptiPlex 780-USFF AIO Stand ……………………………………………. 6 3 Specifications …………………………………………………………………………....15 4 Finding Information ……………………………………………………………………....15 3/15...
Setting up the Dell OptiPlex 780-USFF AIO Stand Components AIO Stand, Cable Cover, System Sleeve, VGA / USB Cable NOTE Refer to the Monitor and System Instruction Guides, packaged separately. ______________________________________________________________________________________ Place the AIO Stand on a level, stable surface.
Page 7
Determine which monitor cable will be used (VGA or DisplayPort), and follow appropriate instructions. Locate the provided VGA cable. Route the VGA cable through the cable tray. DisplayPort Locate the system-end of the cable in the cable tray. Remove the front cable cover to locate the monitor-end of the cable. 7/15...
Page 8
Attach the monitor to the AIO stand. Connect the power plug, the monitor cable (VGA or DisplayPort), and the USB cable to the monitor. DisplayPort 8/15...
Page 9
Route the accessory cable (keyboard, mouse, speakers, etc.) through the cable tray. Ensure the system sleeve is unlocked (orange tab will show). 9/15...
Page 10
Extend the system label carrier. If applicable, remove mylar from front surface(s) of chassis prior to sleeve installation. Insert the system into the system sleeve in the orientation illustrated below. CAUTION Do not reverse the insertion orientation! NOTE When inserted properly, the CD end of the system will reach the end of the system...
Page 11
Ensure the AIO stand is unlocked (orange tab will show). Slide the system sleeve onto the back of the AIO stand. Ensure that the cables do not impede the sleeve from fully seating onto the stand. 11/15...
Page 12
Connect the monitor cable (VGA or DisplayPort), power plug, network cable and any accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the system. Slide the lock switch out to unlock the cable cover. With the system label carrier extended, attach the cable cover underneath the label carrier and to the system sleeve.
Page 13
Slide the switch to lock the AIO stand. Attach customer-supplied security accessories. NOTE These security features are only accessible when the AIO Stand lock is engaged as shown in Step 13. 13/15...
Page 14
Connect your facility network cable to the rear of the AIO stand to access the facility network. Connect the power cord supplied with the system to the rear of the AIO Stand and to facility wall power. ______________________________________________________________________________________ Range of Motion 14/15...
8.0 lbs (3.7 kg) * not including monitor and system Monitor and System Weight Capacities ≦ 10.1 lbs (4.6 kg) Dell Monitor: P190S/1909W/P2210 ≦ 7 lbs (3.2 kg) Dell System: OptiPlex 780-USFF Temperature Operating F to 95℉ (0 C to 35 Storage F to 149℉...