Always there to help you Register your product and get support at HTL9100 www.philips.com/welcome Question? Question? Contact Contact Philips Philips User manual...
Contents 1 Important Safety Care for your product Care of the environment Compliance Help and support 2 Your SoundBar Indicators on the main unit Remote control Connectors Wireless speakers Wireless subwoofer 3 Connect and set up Charge speakers Pair up with speakers/subwoofer Place speakers Connect to TV Connect digital devices through HDMI...
Secure the reach of children. Ensure that the battery wall mount to a wall that can support the compartment is completely secure after combined weight of the product and the you replace the battery. wall mount. Koninklijke Philips Electronics...
This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured Hereby, Philips Consumer Lifestyle, declares that with high quality materials and components, this product is in compliance with the essential which can be recycled and reused.
Alternatively, you can contact Philips Consumer Congratulations on your purchase, and Care in your country. Before you contact welcome to Philips! To fully benefit from Philips, note down the model number and the support that Philips offers, register your serial number of your product. You can find this SoundBar at www.philips.com/welcome. information on the back or bottom of your product.
c HDMI 1 Remote control Lights up when you select HDMI IN 1 as the input source. This section includes an overview of the d HDMI 2 remote control. Lights up when you select HDMI IN 2 as the input source. e OPTICAL/COAX • Lights up when you switch to optical or coaxial input source.
HDMI 2: Switch your source to the HDMI Rear connectors IN 2 connection. c Source buttons OPTICAL: Switch your audio source to the optical connection. COAX: Switch your audio source to the coaxial connection. AUDIO-IN: Switch your audio source to the AUDIO-In connection (3.5mm jack).
Wireless speakers Wireless subwoofer The SoundBar comes with 2 wireless surround The SoundBar comes with a wireless subwoofer. speakers (left and right). POWER ON * The illustration above is for the right speaker's top view and bottom view. a CONNECT a Speaker indicator Press to to enter the pairing mode for the • During wireless pairing between the...
3 Connect and set » When fully charged, the indicator on the speaker lights up white for 30 seconds. Note This section helps you connect your SoundBar • It may take around 2 hours to fully charge the speakers. to a TV and other devices, and then set it up. •...
» If the pairing fails, the indicator on the speaker blinks red slowly. If the pairing fails, repeat the steps above. WOOFER Repeat the steps above to pair up the other surround speaker with the main unit. Pair up with the subwoofer Turn on the SoundBar and the subwoofer.
Note • If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through your SoundBar. (see 'Connect audio from TV and other devices' on page 10) • If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV.
Page 12
Option 3: Connect audio through Note analog audio cables • When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required. Basic quality audio Using an analog cable, connect the AUX connectors on your SoundBar to the Option 1: Connect audio through a AUDIO OUT connectors on the TV or other device.
4 Use your Surround sound mode SoundBar Experience an immersive audio experience with surround sound modes. Press V.SURR to select a surround mode. • Surround: Creates a surround listening This section helps you use the SoundBar to play experience. The V.SURR indicator on audio from connected devices.
» When night mode is turned off, the V.SURR indicator blinks twice. On the Bluetooth device, switch on Bluetooth, search for and select Philips HTL9100 to start connection (see the Note user manual of the Bluetooth device on how to enable Bluetooth).
If you want to connect your SoundBar with another Wall mount Bluetooth device, disable the currently connected Bluetooth device. • Philips does not guarantee 100% compatibility with all Bluetooth devices. Note • You must detach the surround speakers from the main unit before wall mounting or un-mounting.
6 Product • Dimensions (WxHxD): 1035 x 73 x 156 mm (with 2 surround specifications speakers attached) • Weight: 3.9 kg Surround speakers • Speaker impedance: 8 ohm Note • Speaker drivers: 2 x 63.5 mm (2.5") full • Specifications and design are subject to change without range notice.
A device cannot connect with the SoundBar. If you still have a problem, get support at www. • The device does not support the philips.com/support. compatible profiles required for the SoundBar. Main unit • You have not enabled the Bluetooth function of the device.
Page 18
Année/mois (aaaa/mm) au cours de laquelle le marquage CE a été apposé) EUROPEAN DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V. (Company name / Nom de l’entreprise) TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS (address / adresse) declare under our responsibility that the product(s): (déclarons sous notre propre responsabilité...