Page 1
Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation. If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours...
SAFETY INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD BE PLACED...
2. If a Video Head Cleaner does not solve the problem, Please call • Do not place any object containing water or other liquids on the our help line mentioned on the front page to locate a sharp VCR/DVD. In the event that liquid should enter the cabinet, unplug Authorised Service Centre.
FEATURES ¡ Search Chapter search / Title search / Track search / Time search ¡ Dolby Digital sound ¡ Repeat This VCR/DVD can handle Dolby Digital surround sound Chapter / Title / Track / Group / All / A-B having 5.1 channels when connected to a Dolby Digital ¡...
INTRODUCTION Supplied Accessories • Remote control • Operation Manual • Two AA batteries • Round coaxial cable • Quick Start Guide Manufactured under license from Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital “Dolby” and the double-D symbol are trademarks of Theater Systems, Inc.
Read carefully the information located at the bottom of your VCR/DVD and enter below the Serial No.Retain this information for future reference. Model No. VCR/DVD COMBINATION : DV-NC100H Serial No. __________________________ The following discs cannot be played back on this VCR/DVD: ¡...
FUNCTIONAL OVERVIEW FRONT PANEL DV-NC100 OPERATE OPEN/CLOSE STOP/ OUTPUT PULL OPEN EJECT PLAY TIMER STOP PLAY (TRACKING) 1. OPERATE 12. Remote Sensor To turn the unit ON or OFF. 13. TIMER indicator The indicator is on when this unit is turned on. The indicator is on when the VCR/DVD is in standby 2.
FUNCTIONAL OVERVIEW REMOTE CONTROL OPERATE OPEN/CLOSE 1. DISPLAY Button DISPLAY SETUP EJECT • Press to display the current playback mode.(DVD) ANGLE SUBTITLE VIDEO Plus+ AUDIO MARKER • Press to display the current time, tape counter and MODE ZOOM channel number.(VCR) 2.
FUNCTIONAL OVERVIEW Display VCR output mode DVD output mode Lights up when the A-B repeat function is on. *Lights up when the timer recording *Lights up when a tape Lights up when the or an OTR recording has been set. is inserted.
SETTING UP YOUR VCR/DVD COMBINATION CAUTION: • Be sure to turn off the VCR/DVD and equipment to be connected before connecting. • Read through the operation manual for the equipment to be connected. • Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD, because it may cause electrical interference when you are watching television programmes.
SETTING UP YOUR VCR/DVD COMBINATION Connecting to Audio Equipment Connecting the VCR/DVD to audio equipment provides normal stereo sound, plus powerful stereo sound enhanced by Dolby Digital 5.1 channel surround sound, DTS, and MPEG Audio. Playing 2 channel audio C C Analogue audio connection AERIAL DIGITAL ANALOG...
SETTING UP YOUR VCR/DVD COMBINATION Playing Dolby Digital (5.1 channel), DTS or MPEG audio Connecting an amplifier with a Dolby Digital/ DTS/ MPEG Audio digital surround processor to your VCR/DVD’s coaxial digital jack provides richer and more powerful audio play. C C Digital connection to a processor or amplifier with a coaxial digital input jack You can make this connection using a coaxial digital cable.
VCR/DVD SET UP Auto Clock Manual Channel Preset • Channel Presetting must be set before the Auto Clock is set. • To set the clock automatically, the channel assigned to Press VCR, then MENU. position 01 must have the PDC signal. Press K or L to select INITIAL, then press B.
VCR/DVD SET UP appears next to the number. This is because SKIP is Channel Reprogramming set to ON for this position number. You can replace two channels. • When a weak signal is received in Channel Press VCR, then MENU. Reprogramming mode, you can change the back- Press K or L to select INITIAL, then press B.
OTR (One Touch Recording) Press B until the desired mode (NORMAL, SOFT, or This function enables you to set the duration of a recording SHARP) is indicated on the TV screen. simply by pressing REC/OTR. Press MENU to exit. Follow steps in “Viewing and Recording the...
VCR OPERATION Automatic Operation Press K or L repeatedly until the relevant end hour appears. Next, enter the minute digit. Automatic Rewind, Eject, Off Press K or L repeatedly until the relevant channel num- When the end of a tape is reached during recording, play- ber appears.
VCR OPERATION Timer Recording Using the VIDEO Plus+ ® System PDC (Programme Delivery Control) You can programme the timer using the PlusCode program- The Programme Delivery Control (PDC) is a very convenient sys- ming number that are printed in TV guide magazine. You can tem which assures that the TV programmes you have pro- set 8 programmes to record.
VCR OPERATION Time Search Press TAPE SPEED to select the desired recording speed (SP/LP). If a tape includes both programmes recorded in the PAL sys- Select “AV2” or “AV3” position on the recording tem and ones recorded in the NTSC system, this function VCR/DVD.
PLAYING A DISC General Features TV Colour System DVDs or Video CDs may contain menus to navigate the disc Different countries use different television colour systems. and access special features. Enter an appropriate number or Tapes recorded in the PAL or NTSC system can be played use Arrow ( K /L / s / B ) to highlight your selection in the back on this unit.
PLAYING A DISC Resume Title Menu DVD-RW VR mode without PBC function Press TITLE. During playback, press STOP. • The title menu will appear. • Resume message will appear on the TV screen. If the feature is not available, symbol may appear Press PLAY, playback will resume from the point at on the TV screen.
PLAYING A DISC Track Search Fast Forward / Reverse Search DVD-RW JPEG VR mode without PBC function There are three ways to begin playback on an Audio CD, During playback, press FWDg or REVh repeatedly Video CD, MP3 or JPEG disc at a specific Track. to select the required forward or reverse speed.
PLAYING A DISC Time Search A-B REPEAT DVD-RW DVD-RW VR mode VR mode without PBC function Press A-B REPEAT at your chosen starting point. During playback, press DIRECT SKIP repeatedly until the • A- appears briefly on the TV screen. Time Search screen appears.
PLAYING A DISC Information on MP3 and JPEG files Random Playback (CD) • This VCR/DVD can play back images and sounds from data recorded in MP3 and JPEG formats on CD-R and This shuffles the playing order CD-RW discs. of tracks instead of playback in •...
PLAYING A DISC • Every press on B will turn the image clockwise by 90 Stereo Sound Mode degrees when an image is displayed. A press on s will turn the image counterclockwise by 90 degrees. • If a group is selected, press K or L to select a desired Press AUDIO repeatedly during playback to select group, then press B, PLAY or ENTER to select a track.
PLAYING A DISC Subtitle Language Changing the On-Screen Display DVD-RW DVD-RW VR mode VR mode You can check information about the current disc by pressing The VCR/DVD allows you to select a language for subtitle DISPLAY on the remote control. during DVD disc (if available) playback.
PLAYING A DISC Marker Setup Screen image easier to see. Three digital gamma settings are avail- able to allow for differences in the images played and in DVD-RW brightness of the room. VR mode without PBC function Press GAMMA during playback. Use markers to memorise your favourite places on a disc.
DVD SETUP Parental Control Display Setting You can change certain aspects of the DVD display screens, Parental Control prevents disc being viewed that exceed the on-screen messages and the display panel on the front of the set limit, unless a password is used. This feature allows you to prevent discs with unsuitable VCR/DVD.
DVD SETUP Language Setting • Only the languages supported by the disc can be selected. Press SETUP to exit. Language options are not available with some discs. NOTE: Press SETUP in STOP mode. • Language Setting for Audio and Subtitle is not available Press s or B to select with some discs.
Where this is not possible please visit our web-site www.sharp.co.uk/customersupport. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 6760648 if telephoning from Ireland),...
SPECIFICATIONS PRODUCT TYPE TOTAL DISTORTION FACTOR DVD Player with Video Cassette recorder DVD : 1KHz 0.008% (JEITA) CD : 1KHz 0.008% (JEITA) NUMBER OF VIDEO HEADS WOW AND FLUTTER Below the measurement limitation (+/-0.001% W PEAK) VIDEO SIGNAL STANDARD (JEITA) PAL colour system CONNECTIONS AUDIO RECORDING SYSTEM...
3. To benefit from this guarantee, any fault which occurs must be notified to Sharp, or its appointed Service Facility within one year from the date this product was purchased. Proof of purchase must be provided.