This product is eligible for the AVCCAM 3 Year Warranty Repair Program. For Operating Instructions details, see page 5. Vol.1 Memory Card Camera-Recorder AG-AF100P Model No. Volume Note that Operation Instructions Vol.1 describes basic operations of the Memory Card Camera-Recorder. For instructions on advanced operations of the Memory Card Camera-Recorder, refer to Operating Instructions Vol.2 (pdf file) contained in the supplied CD-ROM.
To reduce the risk of fire or electric shock plug. Please contact either a local or foreign hazard, keep this equipment away from all Panasonic authorized service center for liquids. Use and store only in locations which assistance in selecting an alternate AC plug.
Model Number: AG-AF100P Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support contact: 1-800-524-1448 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 5
Details about user registration and the extended warranty: Please note, this is a site that is not maintained by Panasonic Canada Inc. The Panasonic Canada Inc. privacy policy does not apply and is not applicable in relation to any information submitted. This link is provided to you for convenience.
Read this first! ..........2 Shooting IMPORTANT SAFETY INSTRUCTIONS ..4 Recommendation for Use of Genuine Basic shooting operations ......35 Panasonic Battery Preparing for recording ........35 (Rechargeable Battery) ......5 Checking photos taken (REC CHECK) ... 35 Outline of operations ........8 SD Memory Card access lamp ......
Page 7
Volume 2 (CD) Shooting Editing Shooting in progressive mode Connecting external units Shooting techniques for different targets Nonlinear editing Adjusting the shutter speed Switching Audio Input Displays Using scene files Saving scene files and other settings on Screen displays SD Memory Cards Clip metadata Menu Using the Counter...
Outline of operations This camera-recorder is compatible with the AVCHD standard, and uses low-cost and easily-available SD/ SDHC/SDXC Memory Cards as recording media. The unit enables high-quality picture recording of close to broadcasting standard, as well as highly creative video production. Recording to and Television/Video device/Monitor playback from SD/SDHC/...
Also, some functions such as optical image stabilization (OIS) and auto focus (AF) cannot be used depending on the lens. Panasonic has confirmed the compatibility of the following lenses (as of December 2010). Please use a lens support when using large lenses weighing more than 1kg (2.2 lb). Not using a lens support may result in damage to the lens mount.
Precaution for use (continued) Lens attachment and detachment • Check that the power switch is set to OFF. ■ Attaching a lens to the camera Turn the lens rear cap and body cap in the direction indicated by the arrows and remove. Lens detachment button Body cap...
Page 11
■ Detaching a lens from the camera Attach the lens cap. While pressing the lens detachment button, turn the lens in the direction indicated by the arrows until it stops, and detach. Attach the body cap. • Ensure that the body cap is attached to prevent dust or dirt from entering the camera.
Speed class 4 or above is required for recording in the PH mode or HA mode. Speed class 6 or above is required when using the VFR function. It is recommended that you use the following Panasonic SD memory cards, SDHC memory cards, or SDXC memory cards. (As of December, 2010)
(SD speed class 4) This refers to a class 4 speed standard (SD speed class) for the continuous writing of data between SD- compatible devices and SD Memory Cards, as designated by the SD standards. When the use of an SD speed class 4 card is recommended for SD-compatible products, this indicates that stable recording operation can be achieved when using SD Memory Cards of class 4 and above.
Operating precautions Do not allow any water to get into the camera- meter away from it. recorder when using it in the rain or snow or at • The AC adaptor (battery charger) may make the beach. some noise when you are using it, but this is •...
Page 15
What to remember when throwing memory cards away or transferring them to others Formatting memory cards or deleting data using the functions of the unit or a computer will merely change the file management information: it will not completely erase the data on the cards. When throwing these cards away or transferring them to others, either physically destroy them or use a data deletion program for computers (commercially...
These settings affect the control and playback sequence of the recorded contents. Before making a recording, set and check the calendar and time zone. (Page 33) Panasonic makes no guarantees for your recordings. • In the unlikely event that content that was not recorded due to a fault related to this camera or SD/SDHC/ SDXC memory card during use, please understand that no compensation can be provided.
Portfolio License for the personal and non- ● “AVCHD” and the “AVCHD” logo are trademarks commercial use of a consumer, and no license of Panasonic Corporation and Sony Corporation. is granted or shall be implied for any use other ● This product has been manufactured under than the personal uses detailed below.
Precaution for use (continued) What is AVCHD? AVCHD is a standard for the recording and playback of highly detailed, high-definition video. Video is compressed in the MPEG-4 AVC/H.264 formats, and audio is recorded in Dolby Digital or linear PCM. Information regarding compatibility of SDHC Memory Cards and recorded video SDHC/SDXC Memory Cards ●...
Description of parts Left side MENU EXEC MENU EXEC START/ PUSH-ENTER STOP 2 – START/ PUSH-ENTER STOP 2 – AUDIO MON AUDIO MON MEGA O.I.S. DISP/ FOCUS POWER PUSH AUTO FUNCTION USER 1 MODE CHK MODE DISP/ POWER FOCUS PUSH AUTO FUNCTION USER 1 MODE CHK...
Right side and rear side 1 Handle (Page 26) 18 Card slot cover and OPEN lever (Page 38) 2 Handle attachment screw (x2) (Page 26) 19 AUDIO OUT CH1/CH2 terminal (Page 42 of Vol.2) 3 USER3 button (Page 11 of Vol.2) 20 VIDEO OUT terminal 4 START/STOP1 button (Page 35) (Page 42 of Vol.2)
Description of parts (continued) Left side and front side BARS ZEBRA EVF DTL CH1 SEL CH2 SEL INT(L) INPUT1 INPUT1 INPUT2 INPUT2 AUDIO INPUT1 INPUT2 COUNTER-RESET/TC SET MIC POWER +48V DISP/ FOCUS POWER 10 11 9 1 BARS button (Page 11 of Vol.2) 2 ZEBRA button (Page 5 of Vol.2) 3 OIS button (Page 11 of Vol.2) 4 EVF DTL button (Page 30)
Remote control To use the remote control, set the IR REMOTE item on the OTHER FUNCTIONS menu to ON. The default setting for this item is OFF. (Page 62 of Vol.2) 1 EXT. DISPLAY button (Page 40 of Vol.2) The following buttons are for functions that 2 DATE/TIME button (Page 40 of Vol.2) cannot be executed on this camera-recorder.
Page 24
Battery cannot be recharged when the DC ■ Remaining battery capacity displays cord is connected to the AC adaptor. When using Panasonic-manufactured batteries compatible with this product, the remaining battery capacity is displayed in minutes. 90min Time remaining will be displayed after a brief...
U.S.A. and Canada. connector Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.
Adjusting the hand strap Adjust the hand strap to suit your hand. Open the cover and adjust the length. Close the cover. • Make sure the cover is fully closed. Attaching/detaching the handle Detaching the handle Screws Use a Philips-head screwdriver and remove the two screws.
The remote control Insert the battery Remote control usable range Push the catch in the direction shown by The distance between the remote control and the arrow ① to remove the holder. unit’s remote control sensor: Within approx. 5 m Angle: Approximately 10°...
Tally lamp The tally lamp can be illuminated during recording by setting the TALLY LAMP item of the OTHER FUNCTIONS screen (Page 62 of Vol.2) to any setting other than OFF. The tally lamp will flash in any of the following circumstances.
Viewfinder This camera has two viewfinders; one is a Fitting the eye cup miniature LCD in the viewfinder and the other is a Attach the eye cup by aligning the projections on retractable 3.5-inch LCD. the eye cup holder and eye cup and fitting them Use the viewfinder that best suits the application together.
Viewfinder (continued) Using the LCD Emphasizing outlines Set the POWER switch to ON. Emphasizing the outlines of the images you see (Page 27) in the viewfinder or on the LCD makes it easier to focus. Open the LCD monitor. Emphasizing the outlines does not effect the •...
Adjusting the screen display Set the POWER switch to ON. (Page 27) Adjust the selected item by tilting the Operation lever in the directions. Press the MENU button. • For menu operation (Page 44) • Operations may also be performed using buttons on the remote control that correspond to those on the camera.
Viewfinder (continued) Changing backlight brightness The brightness of the LCD monitor backlight can be adjusted between five different settings. Select LCD BACKLIGHT from the setup menu DISPLAY SETUP screen. Select and set a value in the range of +1 to The greater the value the brighter the screen.
Setting the calendar The CLOCK SET value is recorded in the contents Tilt the Operation lever in the direction and (clip), and affects the sequence of playback of select YES in the CLOCK SET item on the the thumbnails. Before carrying out recording, be settings menu OTHER FUNCTIONS screen.
Page 34
Setting the calendar (continued) When settings are complete, push the Operation lever, select YES on the confirmation screen, and push the Operation lever again. • The clock can vary in accuracy so check that the time is correct before shooting. •...
Basic shooting operations Preparing for recording • The images shot from when shooting starts until it is stopped are recorded as one clip. Turn the POWER switch to ON. • When recording is paused after a short period, (Page 27) a small amount of time may be required after •...
Basic shooting operations (continued) SD Memory Card access lamp Formatting SD Memory Cards CAM mode/PB mode Set the camera’s power switch to ON. Illuminated orange: Reading/writing possible (Page 27) Flashing orange (fast): Verifying card/inspecting card for possible defects Press the MENU button. Flashing orange (slow): Accessing card Flashing green (slow): Card write-protected/ Select CARD FUNCTIONS→CARD...
SD Memory Card recording times Total available recording times (approx.) when using SD/SDHC/SDXC Memory Cards manufactured by Panasonic Recording mode PH * HA * HE * SD Memory Card (Highest quality mode * (High quality mode/ (Long duration mode/ capacity 1920 ×...
* AVCCAM Restorer is included on the supplied CD-ROM. For details on how to install it, refer to install.txt. For details on how to use it, read the operating instructions (PDF file). The AVCCAM Viewer can also be downloaded from the following website. http://pro-av.panasonic.net/...
Basic operations of the camera Temporarily switching to auto focus Manual focusing Even if you have switched FOCUS to M (MANUAL) Focus ring the camera will focus automatically while you press down PUSH AUTO. MENU EXEC START/ PUSH-ENTER STOP 2 –...
Basic operations of the camera (continued) Using focus assist Iris adjustments Assign FA to any of the USER 1 – 3 buttons FOCUS in the menu SW MODE screen. FUNCTION PUSH AUTO IRIS GAIN WHITE BAL Press the button assigned FA. The contours of the image is taken in the red IRIS dial outline.
Adjusting the gain Light intensity adjustments When the display is dark, increase the gain to Use the ND dial to change the ND Filter used (filter brighten the display. to change light intensity). 1: ND filter is not used. 2: Cuts light intensity by up to about 1/4. MENU EXEC START/...
Basic operations of the camera (continued) White balance adjustments Using presets Set the shutter speed. (Page 14 of Vol.2) Use this feature when you have no time to make white balance adjustments. Place a white pattern in a location with the same lighting conditions and light source as Set the WHITE BAL switch to PRST.
Black balance adjustments Auto Tracking White (ATW) In order to reproduce the black accurately, adjust Using the ATW function enables the recording the zero level of all three RGB primary colors. If the environment to be automatically analyzed and an black balance is not adjusted properly, not only will optimum white balance to be constantly maintained the black be reproduced poorly but the color tones...
Using the setup menus Use the setup menus to change the settings to Tilt the Operation lever in the directions suit the scenes you are shooting or what you are to move the yellow cursor to the function recording. you wish to set. Push the Operation lever (or tilt in the MENU EXEC...
4 - 5 Repeat steps to change any other items. Press the MENU button to complete settings and return to the normal screen. • Tilt the OPERATION lever in the direction, or push the OPERATION lever to change the set value and return to the previous menu (in some cases).
Setup menu structure Menu SCENE FILE SCENE SELECT (Pages 51 to 53 of Vol.2) OPERATION TYPE REC FORMAT SW MODE FUNCTION KNOB VFR MODE (Pages 53 to 55 of Vol.2) LOW GAIN FRAME RATE MID GAIN SYNCRO SCAN HIGH GAIN DETAIL LEVEL V DETAIL LEVEL IRIS DIAL...
Page 47
Menu (continued) DISPLAY SETUP ZEBRA DETECT1 (Pages 59 to 60 of Vol.2) ZEBRA DETECT2 Y GET MARKER CARD FUNCTIONS CARD FORMAT SAFETY ZONE (Page 61 of Vol.2) CARD STATUS CENTER MARKER CLIP PROPERTY FOCUS BAR (only PB MENU) REC COUNTER VIDEO OUT OSD USER FILE CARD READ...
Specifications [General] Shutter speed settings Preset Supply voltage: DC 7.2 V when SYSTEM FREQ is 59.94 Hz (when the battery is used)/ 60i/60P mode: 7.3 V 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, (when the AC adaptor is used) 1/2000 seconds Power consumption: Recording: 12.4 W 30P mode: 1/30, 1/50, 1/60, 1/120, 1/250, 1/500,...
Page 49
Normal sensitivity VFR recording F8.0 normal When REC FORMAT is 1080 24p/30p: (2000lx, 3200K, 89.9% reflex, 1080-59.94i) 12/15/18/20/21/22/24/25/26/27/28/30/32/34/ Horizontal resolution 36/40/44/48/54/60 frame/sec 800 TV lines (standard) When REC FORMAT is 1080 25p: (in the center of the screen) 12/15/18/20/21/22/23/24/25/26/27/28/30/32/ 34/37/42/45/48/50 frame/sec [Image/recording/playback] Recording Format [Image output]...
Page 50
Specifications (continued) [Audio input] [AC adaptor] Built-in microphone Power Source: 110 V - 240 V AC, 50 Hz/60 Hz Stereo microphone 22 W XLR input Power Output: 7.3 V DC, 1.75 A XLR (3 pin) x 2 (INPUT 1, INPUT 2), (Camera-recorder) LINE/MIC selectable, high impedance LINE:...
Page 52
Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. 2010...
Page 53
This product is eligible for the AVCCAM 3 Year Warranty Repair Program. For Operating Instructions details, see page 5 of vol.1. Vol.2 Memory Card Camera-Recorder AG-AF100P Model No. Volume Note that Operation Instructions Vol.2 describes advanced operations of the Memory Card Camera-Recorder. For instructions on basic operations of the Memory Card Camera- Recorder, refer to Operating Instructions Vol.1 (printed documents) contained in the supplied CD-ROM.
Page 54
Volume 1 Read this first! Attaching/detaching the grip IMPORTANT SAFETY INSTRUCTIONS The remote control Recommendation for Use of Genuine Turn on/off the camera Panasonic Battery Tally lamp Outline of operations Viewfinder Please read before use Setting the calendar Operating precautions...
Page 55
Charging the built-in battery/ Menu Setting the time code ......25 Recharging the built-in battery ......25 Setup menu list ..........51 Setting the time code ........25 SCENE FILE screen ........51 Specifying the time code (TC PRESET) ..25 SW MODE screen ...........
Shooting in progressive mode Selecting 1080/30P or 1080/24P in the REC Note the following when shooting in FORMAT option (Page 51) of the setting menu progressive mode. SCENE FILE screen enables shooting in • Set the shutter speed to 1/50 (OFF) for best progressive mode.
Shooting techniques for different targets Self-portrait shooting Zebra pattern Images in the LCD monitor when it is turned 180° Press the ZEBRA button in the CAM mode to show for self-portrait shooting may appear unusual. the zebra pattern or marker on the viewfinder and You can make them appear better by reversing the LCD monitor so you can check the brightness left and right.
Shooting techniques for different targets (continued) Marker PRE REC If you press the ZEBRA button while the zebra Record video and audio from three seconds before pattern is being displayed, a marker appears in the time of the operation to begin recording. the center of the display (if you have set the setup Operation to start Operation to stop...
Variable frame rate (VFR) This camera can perform low speed (undercrank) and high speed (overcrank) recording without the need for a frame rate converter (the camera must be set to 1080_24p or 1080_30p). : Valid frames Camera 24PN 24P mode: Shoots 24 frames a second in native mode.
Page 60
Shooting techniques for different targets (continued) Native recording Standard recording Select 1080/24P recording format from Select 1080/30P recording format from the REC FORMAT option (page 51) on the the REC FORMAT option (page 51) on the settings menu SCENE FILE screen. settings menu SCENE FILE screen.
Page 61
Overcrank shooting Use of Variable Frame Rate (VFR) Normal speed shooting for movie production This is a slow motion effect that can be applied to scenes such as car chases, action, climaxes, When producing videos for screening, a frame etc. For example, a slow motion effect of 1/2 can rate of 24fps as used in film projection is standard be gained if the VFR recording frame rate is set to 60fps when recording with the 30P recording...
Shooting techniques for different targets (continued) Shooting using the FUNCTION knob Press the FUNCTION knob again. • The white frame turns yellow. The following types of recording can be carried out • When the frame is yellow, the FUNCTION using the FUNCTION knob. knob function set via the MENU operates in •...
Optical Image Stabilizer Using the USER buttons Use the Optical Image Stabilizer (OIS) to reduce You can allocate one of thirteen features to each of the effects of camera shake when shooting by the three USER buttons. hand. Use these buttons to change shooting settings Press the OIS button to turn the function on and quickly or add effects to the images you are off.
Shooting techniques for different targets (continued) Wave form monitor function Adjusting the volume while shooting An image wave form can be displayed on the LCD Adjusting the volume monitor by pressing the WFM button while in CAM mode. AUDIO MON/ADV Press the button again to return to the normal display.
Shot mark function LAST CLIP function The marks attached to the thumbnails of clips The most recently recorded clip can be deleted at are called shot marks. On the thumbnail screen the touch of a button by allocating the LAST CLIP monitor you can select only those clips with a function to any of the USER 1 - 3 buttons.
Adjusting the shutter speed Using the SHUTR/F.RATE dial Setting the SYNCRO SCAN Select SYNCRO SCAN from the SHUTTER settings. DIAL SELECT button Select the SYNCRO SCAN function with the SHUTR/F.RATE dial DIAL SELECT button. Turn the SHUTR/F.RATE dial. • The SYNCRO SCAN shutter speed can be Press the DIAL SELECT button.
Page 67
When SYSTEM FREQ = 59.94Hz /OPERATION TYPE = FILM CAM 1080/60i, 720/60P Normal (OFF) 1/60 SYNCRO SCAN 1/100 1/120 1/2000 1/1000 1/500 1/250 1080/30P, 720/30P Normal (OFF) 1/50 SYNCRO SCAN 1/30 1/60 1/120 1/2000 1/1000 1/500 1/250 1080/24P, 720/24P Normal (OFF) 1/50 SYNCRO SCAN 1/24 1/120...
Adjusting the shutter speed (continued) Synchro scan The syncro scan shutter speed used when shooting screens such as a TV screen or computer monitor is set using the SHUTR/F RATE dial (page 14) or the SYNCRO SCAN option on the settings menu SCENE FILE screen.
Switching Audio Input During shooting, you can record up to two Using the built-in microphone channels of sound. You can also switch the input Switch the CH1 SELECT switch to INT (L). sound to be recorded on each of the channels to •...
ALC option setting (Page 56) on the RECORDING SETUP screen of the setting menu. • Check the recording volume level prior to shooting. • The recording level of this camera is set approximately 8 dB higher than Panasonic broadcasting camera recorders (AJ series products).
Using scene files The settings according to the variety of shooting Changing scene file settings circumstances are stored SCENE FILE MENU. They are selected via the SCENE SELECT on the The setting value of the scene file can be changed. settings menu SCENE FILE screen.
Page 72
Using scene files (continued) Set a 6-character filename with the Operation lever when the following screen is displayed. Set the same as user information. (Page 27) • Characters that can be set Space, A to Z, 0 to 9, : ; < = > ? @ [ ] ^_-./ If the RESET/TC SET button is pressed when the filename has been set, the...
Saving scene files and other settings on SD Memory Cards You can save up to four scene file settings or other Push the Operation lever again, select YES settings as files on an SD Memory Card, and you when the following screen is displayed, and can also load them from the card.
Clip metadata You can add the video and audio systems, name LOCATION: of the videographer, shooting location, text memos This indicates ALTITUDE, LONGITUDE, and other information to the video data you have LATITUDE, and SOURCE (altitude, longitude, recorded on the SD Memory Card. This data is latitude, information source).
ā Up to 10 items of metadata on the SD Uploading the metadata (META DATA) Memory Card can be displayed, starting from the most recent date of production. You can perform any of the following operations. ā If characters other than single-byte If necessary, make preparations prior to alphanumeric characters are used in the undertaking the operations.
Clip metadata (continued) ∗ The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. The COUNT value can be reset using the following procedure.
Charging the built-in battery/Setting the time code Recharging the built-in battery Specifying the time code (TC PRESET) The camera’s internal battery saves the date and time. Set TC PRESET so you can record a value of your When LOW INTERNAL BATTERY (indicating that choice as the initial setting for the time code to be the internal battery has no remaining charge) is used at the start of recording.
Page 78
Charging the built-in battery/Setting the time code (continued) With this unit, the time code value is adjusted in When the screen below appears, set the accordance with the format and frame rate. For time code value. this reason, bear in mind that making a change in Tilt the Operation lever in the directions the format or frame rate may result in discontinuity...
Setting user information You can reset the user information to nothing by pressing RESET/TC SET button. Setting user information allows you to store 8-digit information in the hexadecimal format. User information is automatically saved in the BARS ZEBRA memory and retained after you turn off the power. EVF DTL CH1 SEL CH2 SEL...
Basic playback operations MODE button Turn the POWER switch to ON. Press the mode button so the PB lamp turns POWER MODE The camera is now in the PB mode. • Each time you press the button, the mode POWER switch changes as below.
Thumbnail screen Video data created in one shooting session is called a clip. When the PB mode has been established, the clips will be displayed on the LCD monitor and the viewfinder as thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the screen.) You can perform the following operations using the thumbnail screen.
Page 82
Thumbnail screen (continued) 1 Thumbnail display status (Page 34) The types of clips displayed as thumbnails appear in this area. 2 Repeat playback indicator (Page 32) Displayed during repeat playback. 3 Card status display Displays status of SD Memory Card. 4 Battery remaining display (Page 24 of Vol.1) Displays remaining battery capacity.
Adding shot marks to clips Select the card slot for playback Adding shot marks ( ) will make it easier to find You can switch the SD memory card slot for the clips you are looking for. playback. Tilt the Operation lever in the Press the SLOT SELECT button when the directions to move the yellow frame to the THUMBNAIL screen is displayed in the PB...
Playback settings (PLAY SETUP) Make settings for playback format and method. Repeat playback (REPEAT PLAY) Set playback format (PB FORMAT) Use this setting to repeatedly play back all available clips. Set format for playback. Press the MENU button. Press the MENU button. Menu operation (Page 44 of Vol.1) Menu operation (Page 44 of Vol.1) Set the REPEAT PLAY item in the PLAY...
Resume playback (RESUME PLAY) Set skip method (SKIP MODE) Use this setting to play back from where clip had Select which skip (cue) operation is to be previously been paused. performed when playback is paused. Press the MENU button. Press the MENU button. Menu operation (Page 44 of Vol.1) Menu operation (Page 44 of Vol.1) Set the RESUME PLAY item in the PLAY...
Thumbnail operations Selecting the thumbnail display method (THUMBNAIL) You can display the kind of clips you want to see INDICATOR: as thumbnails. Set whether or not to display indicator (ON/ You can also set more precisely how you want the OFF).
Deleting and protecting clips (OPERATION) Clips may be deleted or protected. • Protected clips cannot be deleted. • If selecting ALL CLIPS to delete all clips from Press the MENU button. the memory, this operation may take some Menu operation (Page 44 of Vol.1) time to complete, depending on the volume of Select the OPERATION screen, and push the clips to be deleted.
Thumbnail operations (continued) CLIP PROTECT: Press the MENU button to return to the YES: thumbnail screen. Protect selected clips. mark will be displayed.) • C ancel protection when the protected clip is selected. mark will disappear.) Executing a format of the memory card (see below) will delete all clips even if they are protected.
Format card and check clip and card information (CARD FUNCTIONS) SD Memory Cards can be formatted, and clip and Tilt the Operation lever in the directions SD Memory Card information can be checked. to select item, and push the Operation lever. Press the MENU button.
Page 90
Thumbnail operations (continued) SD Memory Card information screen Clip information screen USED SPACE : Clip number Used space Thumbnail (Thumbnail screen: Page 29) FREE SPACE : Clip information Available space Displays data attached to the clip. START TC: Time code value at start of recording START UB: User information value at...
Useful playback functions Fast forward/rewind Next/previous clip Tilt the Operation lever in the (rewind) or Tilt the Operation lever in the direction (fast forward) direction during playback during playback to pause the clip (or press (or press the SEARCH buttons on the the PAUSE button on the remote control).
Useful playback functions (continued) Frame-by-frame playback Viewing images on a television Tilt the Operation lever in the direction You can view the images on a television if you during playback to pause the clip (or press connect the unit to a television set using an AV the PAUSE button on the remote control).
Connecting external units Headphones 3.5-mm stereo mini jack • Sound is no longer heard from the speaker when the headphones (optional) are connected. External microphone Microphone (optional) Microphone holder AG-MC200G Microphone holder adaptor 12 mm NPUT1 or INPUT2 6 mm •...
Connecting external units (continued) Computer (non-linear editing/file transfer) USB connection cable Computer (optional) Mini-B USB 2.0 • For details on the computer’s conditions and other factors, see page 44. • Use a double-shielded USB connection cable with a maximum length of three meters. TV/Monitor Only the output signals from the camera are shown.
Page 95
When outputting video and audio signals from the camera to an external device, connect to the input terminals of the external device. • Use a double-shielded HDMI cable (not included). • It is recommended that you use Panasonic’s HDMI cable. • This product is not compatible with VIERA Link. ■ Limitations of image output •...
Nonlinear editing Non-linear editing of video data on SD Memory • When copying files from the camera to a Cards can be performed by connecting the camera computer, be careful to ensure that files are via the USB connection cable to a computer for not accidentally overwritten.
Screen displays Regular displays 24 23 1 Time code display : Card is write-protected Each time you press the COUNTER button, the : Recording not possible display switches over to the following data (or : Card is full no indication). ā...
Page 98
Seconds 21 Scene filename display (Page 19) 22 Remaining battery capacity display mmm dd yyyy hh:mm:ss When using Panasonic-manufactured batteries compatible with this product, the remaining 9 Frame rate display battery capacity is displayed in minutes. Displays recording frame rate.
Page 99
• Remaining battery capacity may not be 26 Safety zone displayed correctly when using in high or The range of the zone is indicated by the low temperatures, or when the battery has SAFETY ZONE item (Page 59) on the not been used for a long period of time.
Screen displays (continued) Main warning displays The main warning displays appearing on the LCD monitor or viewfinder are listed below. If a warning display is not listed, check carefully the message displayed. ■ CHECK CARD. CANNOT BE USED DUE TO INCOMPATIBLE Please check the card.
■ ■ NO CARD WRITE PROTECT No card is inserted. The card is write-protected. NOW ACCESSING. Error displays PLEASE DO NOT REMOVE CARD. Card is currently being accessed. Please do not The following messages are displayed when remove the card. an error has occurred in the camera or the SD Memory Card.
Screen displays (continued) Setting the DISPLAY items Display the following items on the viewfinder and LCD monitor by pressing the DISP/MODE CHK button or by configuring OTHER DISPLAY of the DISPLAY SETUP screen of the setup menus. (Page 60) MODE CHK OTHER DISPLAY settings Displays (Hold down DISP/...
Setup menu list SCENE FILE screen Display Item Description of settings mode SCENE (Camera) Selects the settings (SCENE FILES) according to the variety of shooting SELECT circumstances. You can read, save, and initialize these settings from MENU - SCENE FILE - LOAD / SAVE / INIT.
Page 104
Setup menu list (continued) SCENE FILE screen (continued) Display Item Description of settings mode (Camera) DETAIL LEVEL Adjusts the level of the image outline correction (in the horizontal and vertical directions). -7…0…+7 (Camera) V DETAIL Adjusts the level of outline correction in the vertical direction. LEVEL -7…0…+7 (Camera)
SCENE FILE screen (continued) Display Item Description of settings mode (Camera) MATRIX Selects the MATRIX table suitable for the desired color expression during shooting. NORM1: Suitable for shooting in the open air or under a halogen lamp. NORM2: Suitable for brighter colors than the NORM1 mode. FLUO: Suitable for shooting under fluorescent lights indoors.
Page 106
Setup menu list (continued) SW MODE screen (continued) Display Item Description of settings mode (Camera) LOW GAIN Sets the gain value assigned to the L position of the GAIN switch. When OPERATION TYPE = FILM CAM ISO200, ISO250, ISO320, ISO400, ISO500, ISO640, ISO800, ISO1000, ISO1250, ISO1600, ISO2000, ISO2500, ISO3200 When OPERATION TYPE = VIDEO CAM -6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB...
Page 107
SW MODE screen (continued) Display Item Description of settings mode (Camera) USER1 SW Sets the function assigned to the USER1 button. (PB) INH: No function is assigned REC CHECK: Performs recording check. FACE DETECT: This is the face detection function. Performs the AUTO IRIS / AUTO FOCUS operation centering around the detected face.
Setup menu list (continued) RECORDING SETUP screen Display Item Description of settings mode (Camera) PREREC Sets PRE RECORDING to ON or OFF. MODE Enables PRE REC function. OFF: Disables PRE REC function. • TCG is set to FREE RUN. • Cannot be set when you are using INTERVAL REC.
TC/UB SETUP screen Display Item Description of settings mode (Camera) TC MODE Selects the correction mode of the internal time code when the time code of the internal time code generator is recorded. Uses the drop frame mode. NDF: Uses the non-drop frame mode. •...
Setup menu list (continued) AV IN/OUT SETUP screen Display Item Description of settings mode (Camera) SDI & HDMI Sets the output video format of the SDI&HDMI OUT terminal. (PB) OUT SEL 1080i/720P: Output at the resolution set in REC FORMAT. DOWNCONV: SDI is output at 480i, while HDMI is output at 480p.
DISPLAY SETUP screen Display Item Description of settings mode (Camera) ZEBRA Selects the brightness level of the right-leaning zebra patterns on the screen. DETECT 1 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105% (Camera) ZEBRA Selects the brightness level of the left-leaning zebra patterns on the screen. DETECT 2 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105% (Camera)
Page 112
Setup menu list (continued) DISPLAY SETUP screen (continued) Display Item Description of settings mode (Camera) LEVEL METER Select ON to display the audio level meter. (PB) ON, OFF (Camera) ZOOM & Selects the unit of zoom and focus values. FOCUS OFF, NUMBER, mm/m, mm/feet •...
CARD FUNCTIONS screen Display Item Description of settings mode (Camera) CARD Formats the SD Memory Card. (PB) FORMAT Slot1: Formats the SD Card inserted in Slot 1. Slot2: Formats the SD Card inserted in Slot 2. Returns to the previous screen. (Camera) CARD STATUS Displays the SD Memory Card status.
Setup menu list (continued) META DATA screen Display Item Description of settings mode (Camera) CARD READ Loads the metadata recorded on the SD Memory Card on to the unit. SLOT1, SLOT2, NO • “NO FILE’ is displayed when no metadata is recorded on the SD Memory Card. (Camera) RECORD Sets whether to record the metadata to be loaded on the unit simultaneously on...
Page 115
OTHER FUNCTIONS screen (continued) Display Item Description of settings mode TIME ZONE (Camera) Adds to or deducts from GMT the time value of -12:00 to +13:00 in 30-minute (PB) steps. (Refer to the table below.) +00:00 Time Time Area Area difference difference + 00:00...
(PB) TIME (Camera) UPDATE Updates the system. For details on the update information, see our home page http://pro-av.panasonic.net/ . (Camera) LENS UPDATE Updates the lens firmware. For details about the update information, see the home page of each lens manufacturer.
THUMBNAIL screen Display Item Description of settings mode (PB) THUMBNAIL Selects the thumbnail display method. MODE ALL: Displays all clips. SAME FORMAT: Displays clips in the same recording format. MARKER: Displays clips with shot marks. INDEX: Displays clips with an INDEX. (PB) INDICATOR Sets whether or not to display the indicator.
Before calling for service Power supply There’s no power. • Make sure the battery and AC adaptor are connected properly. P25 of Check the connections again. Vol.1 Power shuts off for no • To prevent the battery from running down needlessly, the camera- apparent reason.
Page 119
Recording Cannot record even • Is the write-protect switch on the SD Memory Card in the “LOCK” P38 of through the SD Memory position? The card cannot be recorded to if the switch is in the Vol.1 Card is inserted correctly. “LOCK” position. • Is the remaining memory available on the SD Memory Card extremely low? Please save contents onto different media and delete unneeded data from the card, or use a new card instead.
Page 120
Before calling for service (continued) PC connection Computer does not • Check the operating environment. recognize camera when • If your computer has multiple USB terminals, please try connecting USB connection cable is the camera to a different USB terminal. connected.
Page 121
The changeover between clips may not always be smooth when playing back multiple clips in succession. Video may momentarily pause when playing back multiple clips in succession in circumstances such as those detailed below. ■ Mixture of different recording formats Recording mode = PH mode Playback format = 1080/60i(30P) Recording format...
Besides access to PASS, completing customer registration has a number of other benefits. For further details, refer to the PASS (P2 Asset Support System) website (http://panasonic.biz/sav/pass_e/). Checking the current version of the firmware using the unit and performing the update From the OTHER FUNCTIONS menu page, check the current version of firmware on the unit using the SYSTEN INFO screen.
Cleaning When cleaning, do not use benzene or thinner. • Using benzine or paint thinners may deform the Eye cup holder camera-recorder and/or cause the surface finish to peel off. Eye cup • Before proceeding with maintenance, remove the battery or disconnect the AC cord from the power outlet.
Storage Precautions Before storing the camera-recorder, remove both SD Memory Cards the SD Memory Card and battery. • After ejecting an SD Memory Card from the unit, Store all of these items in a place with low humidity be absolutely sure to stow it in its own case. and relatively constant temperature.
The AVCCAM Viewer can also be downloaded from the following website. (Compatible OS: Windows XP/Windows Vista/Windows 7 or Mac OS 10.4 or later/Mac OS 10.5/Mac OS 10.6) http://pro-av.panasonic.net/ ■ Concerning the handling of the camera’s metadata A special manufacturer area in the control file area under the AVCHD standard is employed for the metadata which is supported by this camera.