Container data center single-zone fire extinguishing system (67 pages)
Summary of Contents for Huawei LUNA2000-100KTL-M1
Page 1
LUNA2000-100KTL-M1 Smart Power Control System User Manual Issue Date 2023-07-15 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
Purpose This document describes the installation, electrical connections, commissioning, maintenance, and troubleshooting of LUNA2000-100KTL-M1 Smart Power Control System (also referred to as Smart PCS). Before installing and operating the Smart PCS, ensure that you are familiar with the features, functions, and safety precautions provided in this document.
Page 4
LUNA2000-100KTL-M1 Smart Power Control System User Manual About This Document Change History Changes between document issues are cumulative. The latest document issue contains all the changes in earlier issues. Issue 03 (2023-07-15) Optimized the structure of the user manual. Updated 2.2 Networking...
LUNA2000-100KTL-M1 Smart Power Control System User Manual Contents Contents About This Document........................ ii 1 Safety Information........................1 1.1 Personal Safety..................................2 1.2 Electrical Safety..................................4 1.3 Environment Requirements..............................6 1.4 Mechanical Safety................................... 8 2 Product Description......................13 2.1 Model......................................13 2.2 Networking Application..............................14 2.2.1 On-Grid Scenario................................
Page 6
LUNA2000-100KTL-M1 Smart Power Control System User Manual Contents 5.6 Connecting DC Power Cables............................42 5.7 Connecting AC Power Cables............................43 5.8 Connecting FE Communications Cables........................46 5.9 Closing Maintenance Compartment Doors......................... 49 5.9.1 Closing the DC Maintenance Compartment Door....................49 5.9.2 Closing the AC Maintenance Compartment Door....................50 6 Checking Before Power-On....................
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information Safety Information Statement Before transporting, storing, installing, operating, using, and/or maintaining the equipment, read this document, strictly follow the instructions provided herein, and follow all the safety instructions on the equipment and in this document.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information ● The equipment is installed or used in environments that do not comply with international, national, or regional standards. ● The equipment is installed or used by unqualified personnel. ●...
Page 9
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information WARNING During operations, wear personal protective equipment such as protective clothing, insulated shoes, goggles, safety helmets, and insulated gloves. Figure 1-1 Personal protective equipment General Requirements ● Do not stop protective devices. Pay attention to the warnings, cautions, and related precautionary measures in this document and on the equipment.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information – Trained personnel: personnel who are trained in technology and safety, have required experience, are aware of possible hazards on themselves in certain operations, and are able to take protective measures to minimize the hazards on themselves and other people ●...
Page 11
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information CA UTION Do not route cables near the air intake or exhaust vents of the equipment. General Requirements ● Follow the procedures described in the document for installation, operation, and maintenance. Do not reconstruct or alter the equipment, add components, or change the installation sequence without permission.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information ● Do not use solvents such as water, alcohol, or oil to clean electrical components inside or outside of the equipment. Grounding ● Ensure that the grounding impedance of the equipment complies with local electrical standards.
Page 13
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information D ANGER Do not store any flammable or explosive materials in the equipment area. D ANGER Do not place the equipment near heat sources or fire sources, such as smoke, candles, heaters, or other heating devices.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information ● Ensure that the site complies with local laws, regulations, and related standards. ● Ensure that the ground in the installation environment is solid, free from spongy or soft soil, and not prone to subsidence. The site must not be located in a low-lying land prone to water or snow accumulation, and the horizontal level of the site must be above the highest water level of that area in history.
Page 15
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information ● Do not install other devices on the top of the equipment without evaluation by the Company. ● When performing operations over the top of the equipment, take measures to protect the equipment against damage.
Page 16
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information Using Ladders ● Use wooden or insulated ladders when you need to perform live-line working at heights. ● Platform ladders with protective rails are preferred. Single ladders are not recommended.
Page 17
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information Hoisting ● Only trained and qualified personnel are allowed to perform hoisting operations. ● Install temporary warning signs or fences to isolate the hoisting area. ● Ensure that the foundation where hoisting is performed on meets the load- bearing requirements.
Page 18
LUNA2000-100KTL-M1 Smart Power Control System User Manual 1 Safety Information ● To avoid short circuits or other risks, do not drill holes into buried pipes or cables. ● When drilling holes, protect the equipment from shavings. After drilling, clean up any shavings.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Product Description The Smart PCS implements rectification and inversion through a three-phase three-level converter. The rectified output is converted from three-phase AC power to DC power and then stored in the energy storage system (ESS). The inverted output is filtered to three-phase AC power, which is then isolated and boosted by a three-phase transformer and fed into the power grid.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Model Identification You can obtain the device model from the model label on the outer packaging and the nameplate on the side of the enclosure. Figure 2-2 Position of the model label on the outer packaging...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Figure 2-4 Earthing system NO TE If the Smart PCS is used in the TN, TN-C, TN-C-S, or TT earthing system, a third-party neutral wire protection device must be added based on local standards.
Page 22
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Table 2-2 1.0 MWh/500 kW standard configurations Name Recommended Model/ Quantity Source Specifications Smart String LUNA2000-200KWH-2H1 Purchased Energy Storage from the System (ESS) Company Smart Power LUNA2000-100KTL-M1 Purchased Control System...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description 2.3 Appearance Appearance and Ports Figure 2-8 Appearance and ports (1) AC maintenance (2) Communications (3) Panel compartment cable hole (FE) (4) Protective cover (5) DC maintenance (6) LED indicators...
Page 25
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Dimensions Figure 2-9 Dimensions Indicator Description You can check the operating status of the Smart PCS by observing the LED indicators on the panel. Figure 2-10 LED indicators Table 2-3 LED indicator description...
Page 26
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Category Status (Blinking Fast: On Meaning for 0.2s and Off for 0.2s; Blinking Slowly: On for 1s and Off for 1s) Blinking green slowly The device is in standby mode.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description NO TE ● If the DC indicator and running indicator do not blink red fast and the fault/ maintenance indicator is steady red, replace parts or the entire device. ● Local maintenance refers to the operation that requires inserting a WLAN module into the USB port of the device, for example, connecting to the SUN2000 app through the WLAN module.
Page 28
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description Figure 2-12 Working modes Table 2-4 Working mode description Working Description Mode Standby The Smart PCS enters Standby mode when the external environment does not meet the operating requirements. In standby mode: ●...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 2 Product Description 2.6 Label Description Table 2-5 Enclosure labels Symbol Name Meaning Operation warning Potential hazards exist after the device is powered on. Take protective measures when working on the device. Burn warning...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 3 Storage Storage NO TICE ● Do not transport devices without appropriate packaging. ● Do not tilt the packaging or place it upside down. If the Smart PCS is not installed immediately, it should be stored according to the requirements outlined in this section.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS Installing the Smart PCS 4.1 Installation Requirements 4.1.1 Site Selection Requirements ● Do not install the Smart PCS in working or living areas. ● If the Smart PCS is installed in public places (such as parking lots, stations, and factories) other than working and living areas, install a protective net outside the device and set up a safety warning sign to isolate the device.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS NO TE ● Class C environment: Outdoor areas more than 500 m away from the sea. If a site is near a pollution source, it is 1500–3000 m away from heavy pollution sources, such as smelteries, coal mines, and thermal power plants;...
Page 34
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS Installation Tools Hammer drill Drill bit (Ф14 mm Insulated torque Phillips insulated and Ф16 mm) socket wrench torque screwdriver (including an extension bar ≥ 50 Wire stripper Rubber mallet...
Page 35
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS Heat shrink tubing Heat gun Ladder Digital multimeter DC voltage measurement range ≥ 1100 V DC AC voltage measurement range ≥ 440 V AC Crane Lifting sling Length ≥ 1.8 m Hoisting capability ≥...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS 4.3 Pre-installation Checks NO TICE ● After placing the equipment in the installation position, unpack it with care to prevent scratches. Keep the equipment stable during unpacking. Checking the Outer Packing Before unpacking the device, check the outer packing for damage, such as holes and cracks, and check the device model.
Page 37
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS NO TICE ● Four persons or appropriate transportation tools are required to move the device. ● Place a foam pad or cardboard under the device to protect its enclosure from damage.
Page 38
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS (1) Lifting handle screw hole (2) Mounting bracket screw holes Procedure Step 1 Take the device out of the packing case and move it to the specified position.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS 4.5 Installing the Smart PCS Mounting Bracket Dimensions The mounting bracket (including M12 bolt assemblies) is delivered with the product. The mounting bracket of the Smart PCS has four groups of tapped holes, each group containing four tapped holes.
Page 40
LUNA2000-100KTL-M1 Smart Power Control System User Manual 4 Installing the Smart PCS Figure 4-6 Installing the mounting bracket NO TE If the bolt length does not meet the installation requirements, prepare M12 bolts and use them together with the delivered M12 nuts.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Electrical Connections 5.1 Precautions D ANGER ● Before connecting cables, ensure that the DC and AC switches on the Smart PCS and all switches connecting to it are set to the OFF position. Otherwise, the high voltage of the device may result in electric shocks.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections CA UTION ● Stay away from the equipment when preparing cables to prevent cable scraps from entering the equipment. Cable scraps may cause sparks and result in personal injury and equipment damage.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Cable Type Conductor Cross- Outer Source Sectional Area Diameter AC power Single-core outdoor cable and 15–35 mm Prepared 70–240 mm cable M12 OT/DT terminal by the (single- customer core) Note [1]: The S value is valid only if the conductors of the PE cable and AC power cable use the same material.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Follow-up Procedure To enhance the corrosion resistance of a ground terminal, apply silica gel or paint after connecting the ground cable. 5.4 Opening the Maintenance Compartment Doors NO TICE ● Do not open the Smart PCS panel.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-3 Removing accessories from the DC maintenance compartment (1) Spare screws on the door panel of (2) Crimping module the maintenance compartment ----End 5.4.2 Opening the AC Maintenance Compartment Door Step 1 Open the AC maintenance compartment door.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-5 Removing accessories from the AC maintenance compartment (1) Spare screws on the door panel of (2) Crimping module the maintenance compartment ----End 5.5 (Optional) Replacing the Crimping Module...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections 5.6 Connecting DC Power Cables Precautions Before connecting the DC power cables, check the following items: ● Check that the DC switches between the DC side of the Smart PCS and the DC LV Panel busbar are off.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-7 Connecting DC power cables ----End 5.7 Connecting AC Power Cables Precautions A three-phase AC switch shall be installed on the AC side of the Smart PCS. To ensure that the Smart PCS can be safely disconnected from the power grid when an exception occurs, select a proper overcurrent protection device in compliance with local power distribution regulations.
Page 50
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections NO TICE ● The cable outer diameter can be measured using the ruler sticker in the maintenance compartment. ● If a cable has a jacket, ensure that the jacket is in the maintenance compartment.
Page 51
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-9 Single-core cable connection Figure 5-10 Multi-core cable connection NO TE It is recommended that the stripped length of the L2 wire be 15 mm shorter than that of the L1 or L3 wire.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections ----End 5.8 Connecting FE Communications Cables NO TICE ● The Smart PCS is connected to the SmartModule through FE communications cables. Ensure that the FE ports on the two ends are connected to GE2 and GE3 of the SmartModule.
Page 53
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Communication Port Description Figure 5-11 Port description (1) Network port 2 (FE2) (2) Network port 1 (FE1) (3) Communications port (COM) (reserved) Figure 5-12 Communications cable connection Procedure Step 1 Remove an appropriate length of the insulation layer from the shielded network cable using a wire stripper.
Page 54
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections (1) Shielded plug (2) Plastic housing (3) Coupling nut (4) Seal ring (5) Sealing nut Step 3 Line up the exposed wires of the network cable in sequence and connect them to the corresponding pins in the plug.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-18 Connecting FE communications cables (1) White-and- (2) Orange (3) White-and- (4) Blue orange green (5) White-and-blue (6) Green (7) White-and- (8) Brown brown ----End 5.9 Closing Maintenance Compartment Doors NO TICE ●...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 5 Electrical Connections Figure 5-19 Closing the DC maintenance compartment door ----End 5.9.2 Closing the AC Maintenance Compartment Door Step 1 Adjust the support bar, close the maintenance compartment door, and tighten the two screws on the door.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 6 Checking Before Power-On Checking Before Power-On Check the items listed in the following table. In case of any nonconforming items, rectify the fault and reinstall the parts. Then check the items in the table again until all they all pass the check.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 7 Power-On and Commissioning Power-On and Commissioning ● The Smart PCS can be commissioned on the SmartLogger WebUI or SUN2000 app. The SmartLogger can manage multiple devices. For details, see the SmartLogger3000 User Manual.
Manual. The app is used for local commissioning, mainly to modify the parameters and upgrade the software version of a single Smart PCS. Downloading the App Access Huawei AppGallery, search for SUN2000, and download the app. Alternatively, scan the following QR codes to download the app installation package.
Page 61
Smart PCS through the WLAN module. NO TICE ● The USB-Adapter2000-C WLAN module is supported. ● The mobile phone operating system must be Android 5.0 or later. ● Huawei and Samsung phones are recommended. Figure 7-1 WLAN module connection (A) Smart PCS (B) WLAN module...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 7 Power-On and Commissioning NO TE ● Configurable parameters vary depending on the grid code. ● The parameter names, value ranges, and default values are subject to change. The actual display may vary.
Page 63
LUNA2000-100KTL-M1 Smart Power Control System User Manual 7 Power-On and Commissioning Figure 7-2 Selecting a connection mode Step 2 Select the login user and enter the login password. The main menu screen is displayed. NO TICE ● When you log in to the system for the first time, set the login password. To ensure account security, protect the password by changing it periodically, and keep it secure.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 7 Power-On and Commissioning Figure 7-3 Login NO TE Set the correct grid code based on the application area and scenario of the Smart PCS. ----End 7.2.3 Setting the PQ/VSG Working Mode NO TE ●...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Device Maintenance D ANGER ● Wear personal protective equipment and use dedicated insulated tools to avoid electric shocks or short circuits. WARNING ● Before performing maintenance, power off the equipment, follow the instructions on the delayed discharge label, and wait for a period of time as specified to ensure that the equipment is not energized.
Page 66
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Table 8-1 Maintenance checklist Check Item Check Method Maintenance Interval ● Cleanness of ● Check whether there is dust on Once every 6 to 12 the air inlet the air inlet and outlet. If...
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance NO TICE After cleaning is complete, reinstall the air inlet baffle. Tighten the screws to a torque of 1.2 N·m. Removing the Air Outlet Protective Cover Figure 8-2 Removing the protective cover NO TICE After cleaning is complete, reinstall the air outlet protective cover.
Page 68
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance CA UTION ● If the external DC switch of the Smart PCS has been turned off automatically, do not turn it on until the fault is rectified. ● If the AC switch between the Smart PCS and the power grid has been turned off automatically, do not turn it on before the fault is rectified.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance 8.3 Alarm Reference For details about alarms, see the LUNA2000-100KTL and 200KTL Series Smart Power Control System Alarm Reference. 8.4 Replacing a Fan CA UTION ● Before replacing a fan, power off the Smart PCS.
Page 70
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Step 3 Pull out the fan. Figure 8-6 Pulling out fan tray (2) Step 4 Remove cable ties from the faulty fan. ● Fan 1 is faulty. Figure 8-7 Removing cable ties from fan 1 ●...
Page 71
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Figure 8-10 Removing the fan Step 6 Install a new fan (fan 1 is used as an example). Figure 8-11 Installing a new fan Step 7 Bind the fan cables.
Page 72
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Step 8 Push in the fan tray until the fan baffle plate is flush with the Smart PCS. Figure 8-15 Pushing in the fan tray Step 9 Connect the cables correctly according to the cable labels, and then bind the cables.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance 8.5 Replacing the Smart PCS Context The device enclosure is severely damaged or the device hardware is faulty due to external forces. Procedure Step 1 Send a shutdown command on the SUN2000 app, SmartLogger, or management system.
Page 74
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Step 2 Upgrade software of the new Smart PCS. Ensure that the software version of the new Smart PCS is the same as that of other Smart PCSs on site.
Page 75
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Figure 8-20 Energy yield calibration Step 6 (Optional) If a third-party NMS that complies with the IEC 104 protocol is connected, choose Settings > IEC104, and ensure that the teleindication, telemetering, telecontrol, and teleadjust signal numbers of the new Smart PCS on all tab pages under IEC104 are the same as those of the faulty Smart PCS.
Page 76
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance NO TE ● During the process of Search for Device, do not perform upgrade operations (such as upgrading through the app, management system, or WebUI). ● When you click Search for Device, cable connections (DC and AC) will be checked before device search (not applicable to third-party devices), and device addresses will be automatically allocated.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 8 Device Maintenance Figure 8-23 Deleting a device ----End 8.6 Disposing of the Smart PCS If the Smart PCS reaches the end of its service life, dispose of the device according to local regulations for the disposal of electrical equipment.
LUNA2000-100KTL-M1 Smart Power Control System User Manual 9 Technical Specifications Technical Specifications Efficiency Item LUNA2000-100KTL-M1 Maximum efficiency 98.40% DC Side Item LUNA2000-100KTL-M1 Number of DC routes Maximum DC voltage 1100 V Maximum DC power 123 kW Maximum DC current 215.8 A...
Page 79
LUNA2000-100KTL-M1 Smart Power Control System User Manual 9 Technical Specifications Item LUNA2000-100KTL-M1 AC overcurrent protection Supported DC reverse connection protection Supported DC surge protection Type II AC surge protection Type II Insulation resistance detection Supported Residual current monitoring unit Supported...
Page 80
LUNA2000-100KTL-M1 Smart Power Control System User Manual 9 Technical Specifications On-Grid Parameters Item LUNA2000-100KTL-M1 Rated AC voltage 380 V/400 V/440 V Rated AC power 100 kW (40°C) Maximum apparent power 120 kVA (400 V) Maximum active power 120 kW (400 V) Rated AC current ●...
LUNA2000-100KTL-M1 Smart Power Control System User Manual A Crimping an OT or DT Terminal Crimping an OT or DT Terminal Requirements for OT/DT terminals ● If a copper cable is used, use copper wiring terminals. ● If a copper-clad aluminum cable is used, use copper wiring terminals.
Page 82
LUNA2000-100KTL-M1 Smart Power Control System User Manual A Crimping an OT or DT Terminal Figure A-1 Requirements for OT/DT terminals Crimping an OT or DT Terminal NO TICE ● Avoid scratching the core wire when stripping a cable. ● The cavity formed after the conductor crimp strip of the OT or DT terminal has been crimped must completely wrap around the core wires.
Page 83
LUNA2000-100KTL-M1 Smart Power Control System User Manual A Crimping an OT or DT Terminal Figure A-2 Crimping an OT terminal (1) Cable (2) Core (3) Heat-shrink tubing (4) OT terminal (5) Hydraulic pliers (6) Heat gun Figure A-3 Crimping a DT terminal...
LUNA2000-100KTL-M1 Smart Power Control System User Manual B Grid Codes Grid Codes NO TE The grid codes are subject to change. The listed codes are for reference only. Set the correct grid code based on the application area and scenario of the Smart PCS.
Page 85
LUNA2000-100KTL-M1 Smart Power Control System User Manual B Grid Codes Grid Code Description LUNA2000-100KTL-M1 Japan standard (60Hz) Japan standard power grid 2 Supported EN50438-TR Turkey low-voltage power grid Supported ANRE Romania low-voltage power Supported grid Japan standard (MV420-50Hz) Japan standard power grid...
LUNA2000-100KTL-M1 Smart Power Control System User Manual C Resetting Password Resetting Password Reset the password only when the AC power is supplied to the Smart PCS from the power grid, diesel generator, or other voltage-source PCSs. Step 1 Check that the AC and DC sides of the Smart PCS are both powered on, and indicators are steady green or blinking slowly for more than 3 minutes.
Preconfigured Huawei-issued certificates are used only in the deployment phase, for establishing initial security channels between devices and the customer's network. Huawei does not promise or guarantee the security of preconfigured certificates. The customer shall bear consequences of all security risks and security incidents arising from using preconfigured Huawei-issued certificates as service certificates.
LUNA2000-100KTL-M1 Smart Power Control System User Manual E Contact Information Contact Information If you have any questions about this product, please contact us. Table E-1 Customer service contact information Regio Country/ Email Region Europ France eu_inverter_support@huawei.com 0080033888888 Germany Spain Italy...
LUNA2000-100KTL-M1 Smart Power Control System User Manual F Acronyms and Abbreviations Acronyms and Abbreviations Smart String Energy Storage System Fast Ethernet Gigabit Ethernet Light Emitting Diode RCMU Residual Current Monitoring Unit Smart PCS Smart Power Control System Issue 07 (2023-07-15)