Advertisement
Thank you for purchasing this Yamaha product.
With the included USB power cable, connect the charging connector on the headphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).
When using the headphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.
Turn the power off, and then start from step 1 of "Pairing".
Hold down the power key for two seconds to turn the headphones on/off.
Play | Briefly press the function key once. |
Pause | During playback, briefly press the function key once. |
Raise the volume | Briefly press the + key once. |
Lower the volume | Briefly press the – key once. |
Skip to the next song | Hold down the + key for two seconds, until you hear a "beep" sound. |
Skip to the previous song | Hold down the – key for two seconds, until you hear a "beep" sound. |
Enable/disable AMBIENT SOUND and ADVANCED ANC | Press the ANC key. |
* You can also use this product by connecting the 3.5 mm stereo mini-plug cable that is included.
Receive a phone call | When a phone call comes in, briefly press the function key once. |
End a phone call | During the phone call, briefly press the function key once. |
Raise the conversation volume | Briefly press the + key once. |
Lower the conversation volume | Briefly press the – key once. |
Ignore a call | When a phone call comes in, hold down the function key for two seconds. |
Bluetooth version | Version 5.0 |
Supported profiles | A2DP, AVRCP, HFP, HSP |
Supported codecs | SBC, AAC, Qualcomm® aptX™ Adaptive |
RF Output Power | Class 2 |
Maximum communication range | Approximately 10 m (without interference) |
Number of devices that can be registered | Up to 8 devices |
Internal rechargeable battery | Lithium-ion battery |
Charging time | Approximately 3.5 hours |
Continuous playback time | Approximately 35 hours |
Charging temperature | 5 - 40°C |
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
https://download.yamaha.com/
Manual Development Group
© 2020 Yamaha Corporation
Published 01/2022
AMOD-B0
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Yamaha YH-E700A - Wireless Noise Cancelling Headphones Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the YH-E700A that isn't answered in the manual? Leave your question here.