14. TECHNICAL DATA...................21 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the • appliance. Clean the appliance with a moist soft cloth. Only use • neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
ENGLISH 2.5 Disposal • Obey the safety instructions on the detergent packaging. • Do not put flammable products or WARNING! items that are wet with flammable Risk of injury or suffocation. products in, near or on the appliance. • Disconnect the appliance from the •...
4. CONTROL PANEL 4.1 Control panel description Programme knob Start/Pause touchpad (Start/ Pause) Spin reduction touchpad (Spin) Programme status indicators: Temperature touchpad (Temp.) Door locked indicator Prewash touchpad (Prewash) End cycle indicator Delay start touchpad (Delay Start) Child lock indicator...
Page 7
ENGLISH Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 2.5 kg Synthetic items or mixed fabric items. Normal 1200 rpm soil. Synthetics 60°C - Cold Delicate fabrics as acrylics, viscose, polyest- 2.5 kg er items.
Page 8
Programme Maximum Programme description Temperature load (Type of load and soil level) range Maximum spin speed 1 kg Synthetic and mixed fabric items. Light soil and 800 rpm items to freshen up. Quick 30°C 1) Standard programmes for the Energy Label consumption values. According to regu- lation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
ENGLISH Programme ■ ■ ■ 1) When you set the Quick option, we recommend that you decrease the quantity of the laun- dry. It is possible to keep the full load but the washing results can be unsatisfactory. Recom- mended load: cotton: 2.5 kg, synthetics and delicates: 1.5 kg. 6.
7. OPTIONS 7.1 Temp. 7.3 Prewash Set this option to change the default With this option you can add a prewash temperature. phase to a washing programme. Use this option for heavy soil. Indicator = cold water. When you set this option the programme The indicator of the set temperature duration increases.
ENGLISH • To activate/deactivate this option • The appliance has a malfunction. To deactivate/activate the acoustic press at the same time signals, press at the same until the indicator comes on/goes time for 6 seconds. off. If you deactivate the acoustic 8.3 Acoustic signals signals, they continue operate when the appliance has a...
Page 12
Always obey the instructions Detergent compartment for that you find on the washing phase. If you use a liq- packaging of the detergent uid detergent, put it immediately products. before you start the programme. Compartment for liquid additives Detergent compartment for pre- (fabric conditioner, starch).
Page 13
ENGLISH 10.6 Starting a programme 10.9 Cancelling a running without the delay start programme 1. Turn the programme knob to position Press the to cancel the programme and to • The indicator of the stops to deactivate the appliance. flash and stays on. 2.
10.12 At the end of the To drain the water: programme 1. If necessary, decrease the spin speed. If you set , the appliance only • The appliance stops automatically. drains. • The acoustic signal operates (if it is activated).
ENGLISH 11.2 Stubborn stains • If your appliance has not the detergent dispenser with the flap device, add the For some stains, water and detergent is liquid detergents with a dosing ball not sufficient. (supplied by the detergent's manufacturer). We recommend that you remove these stains before you put the items in the 11.4 Ecological hints appliance.
Page 16
• Set the cotton programme with the Regularly examine the seal and remove all highest temperature with a small objects from the inner part. quantity of detergent. 12.4 Door seal 12.5 Cleaning the detergent dispenser...
Page 17
ENGLISH 12.6 Cleaning the inlet hose and the valve filter 12.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
ENGLISH 12.8 Emergency drain 0° C, remove the remaining water from the inlet hose and the drain pump. Because of a malfunction, the appliance 1. Disconnect the mains plug from the cannot drain the water. mains socket. If this occurs, do steps (1) through (9) of 2.
Page 20
• The indicator of button Start/Pause WARNING! flashes in red 11 times and 1 (or 2 or 3) Deactivate the appliance time(s) in yellow: the mains supply is before you do the checks. unstable. Wait until the mains supply is stable and the appliance automatically starts operating.
ENGLISH Problem Possible solution The spin phase does not Set the spin programme. operate or the washing cycle lasts longer than usually. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Adjust manually the items in the tub and start the spin phase again.
Page 22
Electrical connection Voltage 230 V Overall power 2000 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid parti- IPX4 cles and moisture ensured by the protective cov- er, except where the low voltage equipment has...