Page 1
Mail Hello Hello Messenger Messenger Camera Camera EZweb EZweb EZ Navi EZ Navi EZ ・ FM EZ ・ FM Limit Mode Limit Mode Simple Mode Simple Mode Others Others A5523T Remote Auto Lock/ Remote Auto Lock/ Troubleshooting Troubleshooting Index Index...
Page 2
Introduction Thank you for purchasing the A5523T. Before using your A5523T, be sure to read the A5523T Basic Manual (this PDF manual) to ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe places so you can retrieve them whenever you need them.
Cell Phone Etiquette Etiquette for Cell Phone Use ■ The cell phone always emits weak radio waves when power is on. ■ Use the cell phone in an enjoyable and safe manner without forgetting to be considerate of others around you. ●The use of cell phones is not ●Be considerate of where you allowed in some places.
Cell Phone Basics Cell Phone Features Hello Messenger Mail Camera Up to four You can e-mail to other You can take members can cell phones or to a PC. photos and movie exchange text, clips and then photos and sound send them Page in real time using...
Manner Mode and Voice Memo Manner Mode Voice Memo You can use manner mode to turn When you cannot answer calls, off the incoming call ring tone and the cell phone can play an other tones so as not to answering message (Japanese) inconvenience other people.
Do not use the cell phone while driving! Holding a cell phone, talking on a cell phone, looking at a cell phone display to send mail or perform some other operation while driving is against the law in Japan. (Revised Traffic Control Law, effective November 1, 2004) ×...
Spam and One-ring Calls If you receive spam: You can set the mail filters to reject only specific mail or mail indicated by 未承諾広告※ (Unsolicited Advertisement), which often tends to be spam. The following mail filters are available for rejecting spam: ...
Disaster Message Board Service About Disaster Message Board When a big scale disaster occurs, you can register your safety information through EZweb. The registered safety information can be referred from anywhere in Japan through EZweb or Internet. ●When a big scale disaster occurs, from au phone, you can register your safety information Registering such as your condition or comments to the 災...
Page 9
Safety information Top display of 登録 for registration registration display the Disaster Message Board 災害用伝言板 Safety information 〜登録〜 reference display 被災状況 災害用伝言板 無事です。 被害があります。 伝言板トップ 自宅に居ます。 災害用伝言板 避難所に居ます。 〜サービス提供中〜 コメント見て 安否情報の登録・確認が 〜確認〜 できます。 安否情報を確認したい相 コメント入力 (100文字まで) ...
Contents ●Introduction ●Cell Phone Etiquette Etiquette for Cell Phone Use ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1 ●Cell Phone Basics Cell Phone Features ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2 Manner Mode and Voice Memo ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3 Checking the Power, Signal Strength, and Battery Level・・・・・・・・・・・・・・・・・・・・・・・・・・・・・3 Do not use the cell phone while driving! ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・4 Spam and One-ring Calls・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・5 Disaster Message Board Service ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・6 ●Contents...
Page 11
Viewing Photos in Simple Mode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・107 ●Other Functions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・108 Using the Safety Buzzer・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・108 ●In Case You Lose Your A5523T ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・110 Setting Conditions for Enabling the Remote Auto Lock ・・・・・・・・・・・・・・・・・・・・・・・・・・・110 Remotely Enabling the Auto Lock on Your A5523T ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・111 ●Troubleshooting ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・112 ●Index ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・114...
Names of Parts From the Front From the Back Charge indicator/ Incoming LED Earpiece Display Sub-display Warp function key Macro focus switch Microphone Camera(lens) EZapps key/ Phone book key/ Mobile light Soft key 1 Soft key 2 Mail key EZ key Speaker Memo key/ ...
Security Code and Passwords You can use the security code and passwords described below to restrict use of your A5523T. Take care not to forget the security code and passwords, because they are required for performing various operations and using subscription services.
Confirm that the charge indicator lights. ・Charging: The charge indicator lights. ・Charging finished: The charge indicator goes out. If you charge the A5523T battery pack while the phone is turned on, it beeps when charging starts or ends. Note Note ・Hold the desktop holder while removing the A5523T.
Learning the Basics Key Assignments :EZapps startup :Display Incoming History :E-mail :Voice memo setting/cancel; character delete; operation cancel :Make and answer calls; use the Pair function 0〜9、 *、# :Phone number and character input :Display Launcher menu :Phone Book :Display Outgoing History ...
Page 17
Warp Function Key Use the up, down, left, and right parts of the key to select items and to move the cursor. Press the center of the key to confirm a selected item. Selects items, and moves the cursor up, down, /f left and right.
Turning On Power Hold down S for at least one second. Standby screen Check the signal strength. Strong Medium Weak Very weak Out of range ・You cannot receive or make calls if is displayed. Check the battery level. Very low Full Empty Charging...
Configuring Initial Settings Initial menu When the standby screen is displayed, press @. Press 3 設定しない (Do Not Setup). ・ If you select 設定しない (Do Not Setup), the initial settings are as shown below. Lock No. 1234 EZweb Medium-small Telephone Medium Character Input Medium...
Switching the Display Language to English You can switch the display language for function names and other items to English. When the standby screen is displayed, press @. Use E to select 機能 (Function) and then press @ (選択 [Select]). Press 3 画面表示...
Page 21
Use G to select English and then press @ (Select). Use G to select Alphabet and then press @ (Select).
Viewing the Display Display indicators keep you informed when new e-mail arrives, about the status of function settings, etc. Display ① ② ③ ④ ⑤ ⑥ Indicator Description ① Indicates signal strength. ② Indicates battery level. ⑦ Indicates that EZweb is in use. Indicates a call is in progress.
Page 23
Sub-display ① ② ③ ④ ⑤ Indicator Description ① Indicates signal strength. Indicates that the manner mode is ② turned on. ⑥ Indicates that EZ ・ FM is in use. ③ Indicates the voice recorder is recording. ④ Indicates the side keys are locked. ⑤...
Using Menus Launcher Menu The Launcher menu provides you with access to various A5523T functions. The Launcher menu contains the following items. Alarm Camera EZ・FM Data Folder Safety Navi Hello Messenger SD Card Menu Ir Receiving Limit Mode Simple Mode...
Page 25
Using EZ Menu The EZ menu provides a quick and easy way to access the EZweb functions. When the standby screen is displayed, press M to display the EZ menu. Use F to select a menu, use G to select an item and then press @ (Select) to access a function.
Page 26
Option Menus An Option menu for performing various related operations will open if you press K when is displayed in a screen for configuring function settings, entering characters, or performing other operations. K (Option) K (Close) About Displaying Alert Window Alert window Alerts are displayed in situations such as when you receive mail or you were unable to take a call.
Initializing E-mail and EZweb To use e-mail and EZweb, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, be sure to configure initial settings.
Changing Your E-mail Address You can change the account name part of the E-mail address e-mail address as indicated to the right. △△△@ezweb.ne.jp Part you can change Domain name When the standby screen is displayed, press L and then press 6 E-mail Setup. Press 4 Other Setup.
Page 29
Use G to select 承諾する (Accept) and then press @ (Select). Use G to select the entry box, press @ (Edit), enter an e-mail address using single-byte alphanumeric characters, and then press @ (OK). ・For details on entering e-mail addresses, see page 42. Use G to select 送信...
Using Extra Large Characters This feature displays text using oversize (extra large) characters in screens such as the Call screen, phone book list, E-mail and C-mail checking screen and the EZweb screen. Example: Switching the character size in Telephone to Extra Large When the standby screen is displayed, press @.
Making and Answering Calls Making a Call When the standby screen is displayed, use 0 to 9 to enter the phone number you want to call. ・When calling to a regular phone, you also need to enter the area code. Press Q.
001 KOKUSAI MOBILE TALK Application required. For inquiries, contact the KDDI Customer Service Center. 0077-7160 (toll-free; open 9:00 to 20:00 on everyday including weekends and national holiday) 123 - XXXX ↑ ↑ ↑ ↑ KDDI International Country Area code Phone number access code code ...
Redialing (Outgoing History/Incoming History) Example: Returning a call to a phone number in the incoming history When the standby screen is displayed, press D. ・Pressing C while the standby screen is displayed displays the Outgoing History screen. ・The phone numbers are displayed in order of the most recent to the oldest.
One-ring Calls What is a One-ring Call? A one-ring call is a call from an unknown caller that only rings once, causing it to be stored in the incoming history. One-ring calls are often used to get the receiver to return the call, which will connect you to a dating service or some other service that charges caller at high rates.
Turning On Manner Mode The cell phone informs you of an incoming call or message by vibrating. When the standby screen is displayed, hold down V for at least one second. aThis turns on manner mode, and displays on the standby screen.
Turning On Voice Memo When the standby screen is displayed, hold down R for at least one second. aThe answering message (Japanese) is played, then voice memo is turned on, which is indicated by on the standby screen. Turning Off Voice Memo When the standby screen is displayed, hold down R for at least one second.
Playing a Voice Memo If a voice memo is recorded Memo and the number of memos appear on the standby screen. Use G to select Memo and then press @. Use G to select the voice memo you want to play and then press @ (Play).
Changing the Incoming Ring Tone When the standby screen is displayed, press @. Use E to select Function and then press @ (Select). Press 2 Sound/Vib.. Press 1 Incoming Call. Press 2 Melody.
Page 39
Use G to select Fixed Pattern and then press @ (Select). Use G to select Pattern 3 and then press J (Play). ・If you press J (Back) or R, the tone stops playing and you can select another tone. Press @ (OK). aThe incoming ring tone is set.
Adjusting the Incoming Ring Tone Volume When the standby screen is displayed, press @. Use E to select Function and then press @ (Select). Press 2 Sound/Vib.. Press 1 Incoming Call. Press 1 Volume.
Use G to adjust the volume and then press @ (OK). ・Each press of G changes the volume one step. After a vibration alert, the ring tone sounds while gradually increasing in volume. The ring tone sounds while gradually decreasing in volume. The ring tone sounds while gradually increasing in volume.
Character Input Character Entry Modes When a character entry screen is displayed, you can select the character entry mode if you press J. Menu Items Kanji:Kanji conversion mode aA :Double-byte alphanumeric mode abAB :Single-byte alphanumeric mode 12 :Double-byte number mode 1234...
Page 43
Entering Two or More Characters Assigned to the Same Key After you enter the first character, press C to move the cursor ( ■ ) to the right and then enter the next character. Example: Entering "ab" Press 2 once. Press C once.
- Period (.) or zero (0) cannot be used as the first character. How to Enter E-mail Addresses Use 1 to 0 to enter characters and numbers. Example: Entering "taro.23@toshiba.co.jp" for the recipient's e-mail address Enter "taro.23". t : Press 8 once.
Page 45
Press J (abAB) and then press # Phrase. Use G to select Internet and then press @ (Select). Use G to select .co.jp and then press @ (Select). a".co.jp" is entered. Note Note ・ To enter ".co.jp" etc., you can use the Sentence menu.
Entering Pictograms When a character entry screen is displayed, press J (abAB). ・You can also enter symbols, emoticons, and useful sentences (fixed text) from the character entry mode menu. Press 9 ・You can switch the Pictogram screen by category, such as Face, if you press L or M.
Phone Book Saving a Phone Book Entry New screen Hold down K for at least one second. Use G to select (Name) and then press @ (Select). Enter a name and then press @ (OK). aThe (Reading) for the name is entered automatically.
Page 48
Saving a Phone Book Entry (continued) Use G to select a phone number class and then press @ (Select). ・Follow the next two steps to enter an e-mail address. If you do not want to enter an e-mail address, proceed to Step 9. Use G to select (E-mail 1) and then press @ (Select).
Dialing from the Phone Book When the standby screen is displayed, press K. Use E to select the entry containing the phone number you want to dial and then press @ (Select). Press Q. Note Note ・When Simple Mode is set, you can make calls to pair partners registered using the Pair function by simply holding down one of the keypad keys (1 to 5) for at least one second (one-touch dialing).
Editing Phone Book Entries Select the entry you want to edit and press @ (Select). Press K (Option) and then press 1 Edit. Edit the contents and then press J (Add). Use G to select Overwrite and then press @ (OK). Note Note ・In step 1, you can delete the selected address by pressing 2 Delete after you...
Saving a Phone Number from the Incoming or Outgoing History Example: Saving a phone number from the incoming history to the phone book When the standby screen is displayed, press D and use G to select the phone number you want to save. Press K (Option) and then press 1 Add Phone Book.
Pair Function You can register a maximum of five pair partners you contact often to easily call or send mail. You can also invite pair partners to a Hello Messenger meeting. Registering a Pair Partner When the standby screen is displayed, press Q.
Making a Call to a Pair Partner When the standby screen is displayed, press Q. Use F to select the person you want to call. Use G to select Call and then press @ (Select). Note Note ・If multiple phone numbers and e-mail addresses are registered in a phone book entry, you can select the phone number and e-mail address to use with the Pair function.
Sending a Mail to a Pair Partner When the standby screen is displayed, press Q and then use F to select the person you want to send a mail. Use G to select E-mail or C-mail and then press @ (Select). ・To create an e-mail message, see "Creating and Sending E-mail Messages"...
Mail EZweb Subscription Required Using E-mail To use e-mail, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, be sure to configure initial settings.
Creating and Sending E-mail Messages When the standby screen is displayed, press L and then press 1 Create New. Use G to select To and then press @ (Select). Press @ (Select) and then press 1 Use Phone Book. ・You can specify up to five addresses for the To, Cc, and Bcc fields.
Page 57
Use G to select Subject and then press @ (Select). Enter a subject and then press @ (OK). ・You cannot enter single-byte Japanese characters or a new line in a subject. Use G to select Text and then press @ (Select). Enter the text of the message and then press @ (OK).
Reading Received E-mail Messages When you receive an e-mail message Email appears on the standby screen along with the number of messages received. Use G to select Email and then press @. Indicators :Indicates a folder containing a new message. Press @ (Select).
Page 59
Viewing a Received Message Sender of the message Time and date the message The e-mail address of was received the sender may appear in place of the name. Message text Message subject Name of attached file, if any See page 58. Note Note ・The procedure may differ depending on the e-mail settings.
Reading an E-mail Message with an Attached Photo or Movie Example: Viewing an attached photo Display the e-mail message (page 56). Use G to select the file name and then press @ (Rcv). Press @ (Play). Note Note ・Some files will already be displayed on the screen in Step 1, while other files will require that you select the file name (Step 2), and then press @ (Play).
Replying to Received E-mail Messages When the standby screen is displayed, press L and then press 2 Inbox. Press @ (Select). Use G to select the message you want to reply to and then press @ (Select). Press J (Reply). aThe Create Mail screen appears.
Rejecting Spam The setting of mail filters to reject spam is recommended. Also, selecting サポート設定 (Supportive Settings) enables you to set mail filters easily while answering questions that appear on the screen. Setting Mail Filters Example: Connecting to サポート設定 (Supportive Settings) When the standby screen is displayed, press L.
Using C-mail C-mail is a service that enables the use of phone numbers as addresses to exchange messages between au cell phones that support c-mail. A c-mail message can contain up to 50 double-byte (or 100 single-byte) characters. A message is sent to a phone number.
Creating and Sending C-mail Messages When the standby screen is displayed, hold down L for at least one second, and then press 1 Create New. Enter the text of the message and then press @ (OK). Use G to select Use Phone Book and then press @ (Select).
Reading Received C-mail Messages Received c-mail messages are saved to the Inbox. When you receive a c-mail message Cmail appears on the standby screen along with the number of received messages. Use G to select Cmail and then press @. Indicators :Indicates a read message.
Hello Messenger Hello Messenger is a service that enables you to use a desired cartoon-style character to represent you in a meeting (exchange text, sound, and other data in real time) between au cell phones that support Hello Messenger. The host can select up to four members from the phone book to join the meeting.
Displaying Hello Messenger When the standby screen is displayed, press @. Use E to select Hello Messenger and then press @ (Select). When Starting Hello Messenger for the First Time Press @ (OK), use E to select your character, and then press @ (設定[Set]).
Holding a Meeting You can start a meeting by selecting the members to invite to the meeting from the phone book, a group, or the hello ranking (members that you invited or that invited you to a meeting in the past), or use the Pair function to start a meeting.
Inviting Members to a Meeting You can start a meeting by inviting members registered in the members list. Use G to select スタート (Start) from the Hello Messenger menu (see page 65) and then press @ (選択[Select]). Use G to select アドレス帳 (Phone Book) and then press @ (選択[Select]).
Accepting an Invitation to Join a Meeting When you receive an invitation to a meeting, the ring tone sounds and/or the cell phone vibrates, and then a message inviting you to join the meeting appears. However, if (Incoming Mode) is set to (Auto 着信モード...
Camera Your cell phone has a 1.3 megapixel camera (1,300,000 pixels available) that you can use to shoot photos and movies. It also has a self-timer for taking photos. You can use images you record for the standby screen, and you can attach them to e-mail messages.
Photo and Movie Shooting Tips When shooting photos or movies, frame the subject within the display and hold the A5523T steady with both hands to avoid shaking. When oriented vertically When oriented horizontally Mobile light Camera (lens) Orient the A5523T so...
Taking a Photo When the standby screen is Monitor screen displayed, hold down P for at least one second. aThe monitor screen appears. Point the lens at the subject Preview screen and then press @ (Shot) or aThe photo you just took appears. Saving a Photo Press @ (Save) in the preview screen.
Recording a Movie When the standby screen is displayed, press @. Use E to select Camera and then press @ (Select). Press 2 Movie. aThe monitor screen appears. Point the lens at the subject and then press @ (Rec) or P. aThe cell phone emits a recording start sound, and lights when...
Page 75
Note Note ・ If you do not want to save the movie, press R in the preview screen, use G to select Yes, and then press @ (OK). ・ The following shows how to read the file name in the Data Folder when you record a movie in the High L mode.
Viewing Photos or Movies Example: Viewing a photo When the standby screen is displayed, press @. Use E to select Data Folder and then press @ (Select). Use G to select Photo Folder and then press @ (Select). ・To view a movie, select Movie Folder. Use G to select a folder and then press @ (Select).
EZweb EZweb Subscription Required EZweb is an information service that allows you to enjoy using the Internet ® on your cell phone. You can also download Chaku-Uta , news, and other data from web pages. To use EZweb, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center.
Accessing Sites Viewing the EZ Top Menu You can access EZweb from the Top menu. A variety of useful and fun sites are available on EZweb. キーワード検索機能 (Search by Keyword) Provides an information search function for searching by keyword. カテゴリで探す (Search by Category) Searches sites by category.
Page 79
Basic Operations Use G to select the site you want to access and then press @ (Select). Pressing D or R returns to the previous screen. Holding down either key for at least one second returns to the Top menu. Select the item you Select the item you want to display and...
Bookmarking Frequently Accessed Pages You can save the titles and URLs you often visit, which makes it easy to return to them when you want. When the page you want to bookmark is displayed, press K (Browser menu). Press 1 New bookmark. ・Some pages cannot be bookmarked.
Viewing Bookmarked Pages When the standby screen is displayed, press M and then use F to select the EZweb. Press 2 Bookmark. Use G to select the bookmark for the page you want to view and then press @ (Access). aThe cell phone connects to the site.
® Downloading Chaku-Uta When the standby screen is displayed, press M and then use F to select the EZweb. Press 1 Top Menu. Use G to select カテゴリで 探す (Category Search) and then press @ (Select). Use G to select 着うた ®...
Page 83
Follow the instructions that appear on the display. aDownload is completed. ・Downloaded data is saved automatically to the Data Folder. Press J (Play). aThe downloaded Chaku-Uta ® plays. During playback, press @ (Regist). aThe Register to where? menu appears. Use G to select the tone you want to use the ®...
(Auto Position Search [monthly charge]), いつでも位置確認 (Position Search Mail [no monthly charge]) 位置確認メール EZnaviwalk Using Position Search from the A5523T enables you to locate an Safety Navi au cell phone equipped with Position Search. EZnavi Setup • (Area Message [no monthly charge]) エリア通知...
Page 85
EZ Navi Walk for when you go out Displays various useful menu items for when you are out. Search for the best route to your destination ナビをする [voice navigation]) or for local stores or facilities. 音声ナビ Check out maps of your current location or places you like to go. 地図を見る(FREE)...
What You Can Do with Safety Navi Safety Navi lets you use your A5523T to check on the location of an au cell phone or have it sound an alarm to notify you when the au cell phone is in a particular area during a specified time period.
Page 87
・EZapps transmission is included in the free calling time provided by your service plan. However, family c-mail and packet communications discount services do not apply. ・When the A5523T displays maps or collects Position Search information, information charges apply in addition to the packet communication charge.
EZ ・ FM EZweb Subscription Required You can use your A5523T to listen to the FM radio. You can also record songs broadcast over the radio. Antenna The bundled Toshiba flat-type stereo earphone 04 has a built-in antenna for listening to the FM radio. When you want to listen to EZ・FM radio, be sure to connect the earphone so that you can receive the signal.
Listening to EZ・FM When the standby screen is displayed, press @. Use E to select EZ · FM, press @ (Select), use G to select 承諾する (Agree), and then press @. ・Important notes are displayed. ・A screen for selecting your area appears the first time you start EZ ・...
Page 90
Basic Operations EZ・FM Screen Frequency display area ・You can use F to manually select a station in increments of 0.1 MHz. ・You can hold F for at least one second to automatically select a station. Displayed when there is downloadable information Speaker/Earphone toggle display Station/Song name display area ・The name of the broadcast station is normally...
Note Note ・When you first purchase the A5523T, it is set to automatically exit EZ ・ FM if you do not press any of the keys for approximately 2 hours. You can change this in the ラ ジオ自動終了 (Auto Radio Exit) setting.
Limit Mode Limit Mode allows a parent or superior to limit how much each function can be used to prevent overuse of the cell phone by a child or subordinate. Limits can be placed on incoming and outgoing calls and c-mail. Registering Permitted Members If you register permitted members, your cell phone allows incoming and outgoing calls and c-mail from/to them regardless of the Use Limit settings.
Page 93
Use E to select a phone book entry and then press @ (Select). Press J (OK). Use G to select Yes and then press @ (OK).
Limiting Calls and C-mail You can limit incoming and outgoing calls and c-mail (Access Limit). Example: Only allowing outgoing calls to permitted members When the standby screen is displayed, press @. Use E to select Limit Mode and then press @ (Select). Press 4 Limit Mode Setup.
Page 95
Use G to select Limit Setup and then press @ (Select). Use G to select Access Limit and then press @ (Select). Use G to select Outgo and then press @ (Select). Use G to select Only Permit Member and then press @ (Select).
Setting Use Limits You can configure your cell phone to prohibit outgoing calls and/or c-mail if the monthly planned use limit will be exceeded. Example: Limiting the call amount When the standby screen is displayed, press@. Use E to select Limit Mode and then press @ (Select).
Page 97
Use G to select Use Limit and then press @ (Select). Use G to select Call and then press @ (Select). Use G to select Limited and then press @ (Select). Enter the call amount and then press @ (OK). Note Note ・Your cell phone does not place limits on outgoing calls and c-mail to permitted...
Turning Limit Mode On and Off When the standby screen is displayed, press@. Use E to select Limit Mode and then press @ (Select). Press 5 Limit · Cancel. Enter your Limit Mode password and then press @ (OK). ・The initial default password is "12345678".
Simple Mode Setting Simple Mode enables limited and simplified operations of the phone function, phone book, camera, mail, EZweb and other often-used functions. Entering Simple Mode When the standby screen is displayed, press @. Use E to select Simple Mode and then press @ (Select).
Exiting Simple Mode When the standby screen is displayed, press @. Use G to select Setup and then press @ (Select). Use G to select End Simple Mode and then press @ (Select). Use G to select Yes and then press @ (OK). aThis exits Simple Mode.
Viewing the Display in Simple Mode The following indicators are available for checking the status on the standby display when your cell phone is in Simple Mode. ① ② Indicator Description ① Indicates signal strength. ② Indicates battery level. ③ ③...
Indicator Function Name Photo Camera Movie Barcode Reader Alarm Calendar Notepad Calculator Useful Function ・ Toshiba Site Photo Folder Data Folder Movie Folder SD Card Volume Melody Standby Screen Setup Character/Pict Size Manner Mode Pay/Apply End Simple Mode...
Page 103
Using the Simple EZ Menu The Simple EZ menu provides a quick and simple way to access functions such as EZweb and EZ Navi. When the standby screen is displayed, press M to display the Simple EZ menu. Use G to select a menu item, press @ (Select), use G to select a function, and then press @ (Select).
Saving a Phone Book Entry Using Simple Mode When the standby screen is displayed, press K. Use G to select Yes and then press @ (OK). Enter a name and then press @ (OK). Use G to select Direct Input and then press @ (Select).
Page 105
Use G to select Direct Input and then press @ (Select). ・If you do not want to enter an e-mail address, use G to select Not Input, press @ (Select), and then proceed to Step 8. ・You can also use G to select Sent History or Received Hist and enter an e-mail address from there.
Creating and Sending E-mail/C-mail Messages in Simple Mode Example : Creating and sending an e-mail message When the standby screen is displayed, press L. Use G to select E-mail and then press @ (Select). ・To create a c-mail message, select C-mail.
Page 107
Enter a subject and then press @ (OK). Enter the text of the message and then press @ (OK). ・You can use G to select an item and then press @ (Edit) to edit the currently selected item. Press J ( Send).
Taking Photos in Simple Mode When the standby screen is displayed, press @. Use G to select Camera and then press @ (Select). Use G to select Photo and Monitor screen then press @ (Select). aThe monitor screen appears. Point the lens at the subject Preview screen and then press @ (Shot) .
Viewing Photos in Simple Mode When the standby screen is displayed, press @. Use G to select DataFolder and then press @ (Select). Use G to select PhotoFolder and then press @ (Select). Use G to select a folder and then press @ (Select). Use E to select the photo you want to view and then press @ (Play).
Standby EZapps is starting up or when the cell phone is turned off. ・You cannot receive calls while the A5523T is emitting the Safety Buzzer. Also, you cannot make calls other than to the emergency services (110, 119 or 118).
Page 111
Katakana word Dict and contains a total of roughly 159 thousand entries. Barcode Reader & Maker You can use the camera in the A5523T to scan bar codes. This feature will also create bar codes that contain profiles and address book entries.
A5523T to prevent others from using your cell phone. Setting Conditions for Enabling the Remote Auto Lock You can enable the auto lock if you call your A5523T repeatedly from a registered phone number within a pre-specified period of time. When the standby screen is...
Time, Remote Auto Lock is activated and a message is played notifying you that the cell phone is locked. Note Note ・The Remote Auto Lock cannot be enabled when the A5523T is turned off or out of the service area, or Emission OFF is set to ON.
Page 114
Troubleshooting Reference Symptom Check Measure Page Charge the battery pack. ●Is the battery pack charged? Cannot turn on ●Did you hold down S for at least Hold down S for at least one second. power. one second? Hold down S for at least one second. ●Is power turned on? Move to a location where (out...
Page 115
・For more detailed information. visit the following website: - From the A5523T a Hold down M for at least one second. (Toshiba User Club Site, in Japanese only) - From a PC a http://www.toshiba.co.jp/product/etsg/cmt/faq/top_au.htm (In Japanese only)
Page 116
Index Entering・・・・・・・・・・・・・・・・・・・・・42 Entering characters ・・・・・・・・・・・・・40 Accessories ・・・・・・・・・・・・・・・・・・・10 Entering characters from the same key ・・41 Adjusting the earpiece volume ・・・39 Entering pictograms ・・・・・・・・・・・・44 Alert window・・・・・・・・・・・・・・・・・・・24 Extra large characters・・・・・・・・・・・28 Area Message ・・・・・・・・・・・・・・82,85 EZ・FM・・・・・・・・・・・・・・・・・・・・・・・・86 Antenna ・・・・・・・・・・・・・・・・・・・・86 Exiting ・・・・・・・・・・・・・・・・・・・・・・89 Battery level ・・・・・・・・・・・・・・・・・・・16 Listening ・・・・・・・・・・・・・・・・・・・・87 Battery pack ・・・・・・・・・・・・・・・・10,11 Switching to background music reception ・・89 EZ menu ・・・・・・・・・・・・・・・・・・・・・・23...
Page 117
Registering a pair partner ・・・・・50 Standby screen ・・・・・・・・・・・・・・・・16 Sending a mail to a pair partner・・52 Sub-display ・・・・・・・・・・・・・・・・・11,21 Passwords ・・・・・・・・・・・・・・・・・・・・12 Phone (call) Answering・・・・・・・・・・・・・・・・・・・30 Toshiba flat-type stereo earphone 04・・10,86 Making・・・・・・・・・・・・・・・・・・・・・・29 Turning on/off the power ・・・・・・・・16 Redialing・・・・・・・・・・・・・・・・・・・・31 184/186 ・・・・・・・・・・・・・・・・・・・・29 Phone book ・・・・・・・・・・・・・・・・・・・45 Viewing Dialing ・・・・・・・・・・・・・・・・・・・・・・47...
Page 118
OKINAWA CELLULAR TELEPHONE COMPANY Cellphone and PHS operators collect and recycle unused telephones, batteries and Manufactured by: battery chargers at stores bearing the logo regardless of brand and TOSHIBA CORPORATION manufacturer to protect the environment February 2007 Edition and reuse valuable resources.