English 13. Do not overreach. Keep proper footing and balance GENERAL OPERATIONAL PRECAUTIONS at all times. 14. Maintain tools with care. Keep cutting tools sharp WARNING! When using electric tools, basic safety and clean for better and safer performance. Follow precautions should always be followed to reduce the instructions for lubrication and changing risk of fire, electric shock and personal injury, including...
English STANDARD ACCESSORIES (1) No. 2 Plus bit .......... 1 (W6V3, W6VA3) (3) Hook ..................1 (2) Magnetic hex socket (H= 10 mm) ..1 (W6VB2, W8VB) Standard accessories are subject to change without notice. OPTIONAL ACCESSORIES (sold separately) 1. For hex-head screws Hex-socket Sub-Stopper (B) Magnetic type...
English 4. Confirm the direction of bit rotation (Fig.1) will then remain ON even when the finger is released. The bit rotates clockwise (viewed from the rear side) By pulling the trigger switch again, the switch stopper when the reversing switch lever is set to the “R” side disengages and the switch is turned OFF when the position.
Page 8
Do not tamper with parts other than those necessary to effect carbon brush replacement. NOTE Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.