Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Operations for which the power tool was not designed may create a hazard and Use AEG 18V battery and charger only cause personal injury. Do not convert this power tool to operate in a way which is not WARNING! Read all safety warnings, instructions, specifically designed and specified by the tool manufacturer.
Page 18
The dust produced when using this product may be harmful to Use only System AEG chargers for charging System AEG battery health. Do not inhale the dust. Use a dust absorption system and packs. Do not use battery packs from other systems.
can dig into the surface of the material causing the wheel to climb remove the cut-off wheel from the cut while the wheel is in out or kick out. The wheel may either jump toward or away from the motion otherwise kickback may occur. Investigate and take operator, depending on the direction of the wheel’s movement at corrective action to eliminate the cause of wheel binding.
The product is intended for dry use only. Do not use the product for components need to be replaced which have not been described, wet applications. please contact one of our AEG service agents (see our list of guarantee/service addresses). The product is designed for handheld use. The product is not to be mounted onto a workbench.
Page 21
Wear a suitable dust protection mask. Wear gloves. Always operate with two hands. Not for wet grinding. Using water or other liquid coolants may result in electrocution or shock. Do not use chipped, cracked or defective grinding wheel. Do not use for cutting. Do not use the guard for cut-off operations.
Page 24
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, AEG is a registered trade mark used under Highbrook, Auckland 2013, New Zealand license from AB Electrolux (publ). 961075725-01A...