Shelving Installation/Removal - Electrolux EI24BL10QS Use And Care Manual

Storage
14
CAUTION
Make sure your cantilever shelf is secure on the shelf supports by pressing
down on the shelf before loading the shelf.
To Add or Remove a Shelf:
Remove stored product from the shelf. Do not try to remove a loaded shelf from the
appliance. Grasp the shelf front with both hands, rotate the front upward and lift out.
(See Figure 13b). To install a shelf insert the shelf in the appliance and insert the hooks
into the shelf support slots and drop the shelf down so the tabs engage the bottom of
the slots.
Installed shelf
tang
Rear
tang
(hook)
on shelf
Figure 13a
Tall bottle
storage
area
CAUTION
Never try to move a loaded shelf, remove everything from the shelf before
moving. Use both hands when moving the shelf.
Shelf support
slot
Figure 13
Grasp the shelf by the front with
both hands and rotate the front
of the shelf up, then lift the shelf
up and remove the shelf from the
shelf ladders.
Figure 14
To remove the wine shelf from the frame:
Extend the wine shelf from the frame until
it stops. Lift the front of the shelf to
disengage the side rails and remove the shelf.
Figure 13b