Table of Contents
Advertisement
Error Messages
The mat cannot be recognized.
The mat will unload.
There are no patterns that can be detected.
There are some patterns which cannot add seam allowance.
There are some patterns which cannot set cutting distance
from the outline.
There is a pattern out of the effective area. The pattern
cannot be cut or drawn.
OK to continue?
This data is too complicated and cannot be converted.
This mat cannot be used.
88
Causes / Solutions
A mat that cannot be recognized has been inserted. If a mat
designed specifically for this machine is not being used, use
the specially designed mat.
Clean the dotted marks at the edge of the mat and their
surrounding area. If the mat is still not recognized, replace
the mat with a new one.
The imported SVG data contains data that cannot be
converted, such as images or text.
The seam allowance settings cannot be specified for
complex pattern shapes. Select a pattern with a simple
shape.
Expanding the seam allowance to 2 mm or more may help.
The cutting distance cannot be specified for complex pattern
shapes. Select a pattern with a simple shape.
There is a pattern(s) outside of the cutting area.
If the pattern(s) outside of the cutting area need(s) not to be
cut out or drawn, continue the operation.
To cut out or draw the pattern(s) outside of the area, increase
the setting for "Cut Area", or move the pattern(s) into the area
specified with "Cut Area" (page 30).
When your are welding or unifying patterns:
Reduce the number of patterns arranged or change the
patterns to ones with simple designs.
The mat is one that cannot be used with the function being
performed. Replace the mat.
(For example, the scanning mat was loaded while trying to
cut.)
Advertisement
Table of Contents
