Table of Contents
Advertisement
Using the optical fiber cable adapter
The optical fiber cable adapter is required when connecting the separately
available UFL-3 underwater flash to the Case using an underwater optical
fiber cable (optional: PTCB-E02).
How to install
1 Attach the optical fiber cable adapter to the diffuser shown in the figure
below.
2 Put the underwater optical fiber cable plug all the way into the insertion
slot of the optical fiber cable adapter until the black axis of the
connector is hidden.
Remove the optical fiber cable adapter when you do not use an
underwater optical fiber cable while taking picture.
EN
EN 13
Advertisement
Table of Contents
