Table of Contents
Advertisement
3.2.10 Remote Access Configuration Sub-Menu
You can use this screen to view the Remote Access Configuration Menu. This
feature allows access to the Server remotely via serial port. Use the up and down
arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the following pages.
Main
Advanced
Configure Remote Access type and parameters
Remote Access
Serial Port Number
Base Address, IRQ
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
VT-UTF8 Combo Key Support
Sredir Memory Display Delay
Feature
Configure Remote Access type and parameters
Remote Access
Serial Port Number
Base Address, IRQ
Serial Port Mode
BIOS Setup Utility
PCI/PnP
Boot
[Disabled]
[COM1]
[3F8h, 4]
[115200 8, n, 1]
[None]
[Always]
[ANSI]
[Enabled]
[No Delay]
Option
Enabled
Disabled
COM1
COM2
Read only
115200 8,n,1
57600 8,n,1
38400 8,n,1
19200 8,n,1
9600 8,n,1
53
http://www.tyan.com
Security
Chipset
Select remote access
type.
Select Screen
← →
Select Item
↑ ↓
+/-
Change Field
F1
General Help
F10 Save and Exit
ESC Exit
Description
Enables remote access to system
through serial port.
Select Serial Port for console
redirection. Make sure the
selected port is enabled.
Select Serial Port settings.
Exit
Advertisement
Table of Contents
