Cleaning the shroud
Hold the dirt container and twist the
lid anti-clockwise.
Twist the separator cap anti-
clockwise to unlock and remove.
Make sure the rectangular hole in
the dirt container lines up with the
rectangular hole on the separator.
Taking care of your machine
Lift the lid to reveal the
pre-motor filter.
Lift and remove the separator from
the dirt container.
Replace the separator cap,
twist clockwise to lock.
Lift out the pre-motor filter.
Tap the separator against a bin to
remove any dirt/debris.
Replace the pre-motor filter. Close
dirt bin lid making sure it clicks and
locks into place.