Using Earphones - Olympus VP-10 User Manual

Recording

Using earphones

If you connect commercially available
earphones to the earphone jack (
voice recorder, you will be able to listen to the
audio during recording and playback.
• Use the +/– button to adjust the recording
monitor volume.
• Earphones are not supplied with this
product.
1
Connect the earphones to the voice
recorder's earphone jack (
To earphone jack
• Changing the volume will not affect
the recording level.
• There will be no sound from the
speaker when the earphones are
connected.
NOTE
) of the
• To avoid unpleasantly loud sound, set
the volume to [00] before plugging in
the earphone.
• To prevent feedback, do not place the
earphone near the microphone while
recording.
• Avoid excessive volume when listening
to playback through the earphones. It
may cause hearing damage or loss.
• Battery life depletes quickly while
).
recordings are monitored. To conserve
battery life, leave the earphone
disconnected while recording.
• If the [Anti-Rustle] function (☞ P.39)
is enabled, you may sound like an echo
during monitoring the recording.
2
EN
19