Asus IPILP-AR User Manual page 13

2. Clear password (3-pin CLPWD)
This jumper allows you to clear the password if you forgot your password.
To erase the password:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 2-3 (Normal) to pins 1-2 (Clear
Password).
3. Plug the power cord and turn ON the computer.
4. After the computer boots up, turn OFF the computer.
5. Move the jumper cap from pins 1-2 to pins 2-3.
6. Hold down the <F1> key during the boot process and enter BIOS setup
to verify that the password has been cleared.
IPILP-AR Clear password setting
ASUS IPILP-AR
CLEAR P.W
3 1 5 3
Clear Password Normal
(Default)
9