ZyXEL Communications ZyWALL USG Series Application Notes page 21

Step 4. Go to CONFIGURATION > VPN > IPSec VPN > VPN Connection to open the
configuration screen to configure the phase-2 rule.
Step 5. Click on the Add button to add a rule.
Step 6. To configure the phase-2 rule, the user needs to fill-in:
- VPN connection name
- VPN gateway selection
-Policy for

Local network side

Remote network side
- Phase-2 settings

Active protocol

Encapsulation mode

Encryption algorithm

Authentication algorithm

Perfect Forward Secrecy
ZyXEL – USG Application Notes
20