ZyXEL Communications ZyWALL 5 Support Notes page 154

1. on your PC, clicking Start->Programmer->Check Point SmartConsole R60 -> SmartDashboard
2. Enter your user name and password, then press OK button to use your Check Point.
3. On Network Objects, you must see a default check point object here. For this example, my default
check point object is twsrv12191, double click the object to check its settings.
4. Before you did the settings, you should make sure that your object is a Check Point
Check Point Host)
5. If your check point object is a Check Point Host, select your object and click the right button on your
mouse, then choose Convert To Gateway to change its settings.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 5 Support Notes
Gateway.(not a
154