Time-Dependent Speed Limits; Running In The Background; Changing The Text And Button Size - TomTom BRIDGE Reference Manual

Hide thumbs Also See for BRIDGE:

Table of Contents

As you approach an exit or crossing, the lane you need is shown on the screen and in the instruction

panel.

Tip: To close the lane image, select anywhere on the screen or press the back button.

To turn lane images off, select the Settings button in the Main Menu, then select Appearance. Turn

off the Show previews of highway exits setting.

Time-dependent speed limits

Some speed limits change depending on the time of day. For example, you may see the speed limit

near schools decrease to 40 km/h or 25 mph in the morning from 08:00 a.m. - 09:00 a.m. and in the

afternoon from 3:00 p.m. - 4:00 p.m. Where possible, the speed limit shown in the speed panel

changes to show these variable speed limits.

Some speed limits change depending on driving conditions. For example, the speed limit will

decrease if there is heavy traffic, or the weather conditions are bad. These variable speed limits are

not shown in the speed panel. The speed shown in the speed panel is the maximum speed limit

allowed in good driving conditions.

Important: The speed limit shown in the speed panel is only an indication. You must always obey

the actual speed limit for the road you are on and the conditions you are driving in.

The app continues to run when it is in the background, for example when you are using another app

on TomTom BRIDGE.

If the app is running in the background and you are driving on a planned route, you will continue to

hear driving instructions.

You can change the size of the text and the buttons you see on the screen, for example to make the

text easier to read and the buttons easier to use.

Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen.

To change the size of the text and the buttons, select the Settings button in the Main Menu, then

select Appearance, then select Size of text and buttons. Your device must restart to apply the

change.

Table of Contents