2. Test & debug flow
TEST.
Check the
AC voltage
Power PCBA (110V
or 220V).
Switch on the Power PCBA.
Are the
DC Voltage
outputs OK? (12V, 5.6V,
3.5V, 5V,7V, 34V).
Are 3.5V and 5V DC
outputs normal on main
PCBA?
Update
FLASH
successfully?
A
LGE Internal Use Only
No
Yes
No
Yes
No
Yes
No
1. Check 27MHz system clock.
2. Check system reset circuit.
3. Check FLASH R/W enable signal PRD, RWR.
4. Check FLASH Memory related circuit.
Yes
Check the POWER PART.
Check the POWER PART.
Check the regulators or diode.
Replace FLASH.
3-2
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes