Advertisement
FUJIFILM PRODUCT INFORMATION BULLETIN • QuickSnap Night & Day
5-2 Film Cartridge Design
6. PROCESSING LABORATORY HANDLING
The procedure for film extraction, cutting and identification label application, and the handling
procedures for continuous reel, hanger and Minilab processing are basically the same as those
for the current QuickSnap Flash SUPERIA X-TRA. Make sure, however, that the film extraction
length, leading end cut length, and identification label position conform to the specifications
indicated in the following figure:
120 mm or 26 perforations (max.)
1
Leading end length
2
Film extraction length
3
Identification label position
4
Cut location
5
Together, the film extraction length and leading end length should not total more than 120 mm.
7. PROCESSING AND PRINTING CONDITIONS
(1) Processing Conditions
Process the film with CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S, C-41 or equivalent
processing chemicals.
(2) Automatic Printer Conditions
Please set a new channel for SUPERIA X-TRA 1600, using the same channel settings as for
SUPERIA 200.
8. PARTS RECYCLING
In line with Fujifilm's efforts to protect the environment, photofinishers are kindly urged to send
the used camera bodies to Fujifilm for recycling.
NOTICE
general production runs. However, changes in specifications may occur without
prior notice.
FUJI PHOTO FILM CO., LTD.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
The basic color is green.
The data herein published were derived from materials taken from
– 4 –
AF3-199E
( EIGI-05.01-FG (HB) -1
Ref. No.
) Printed in Japan
! ! ! ! !
Advertisement
