1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the scanner.
3. Press and release the
check position and the P
low or empty, the Epson Stylus CX moves that cartridge to the
mark.
Note: Don't hold down the
start to clean the print head.
Caution: Don't move the print head by hand; this may damage the Epson Stylus
CX. Always press the
20
Maintaining Your Epson Stylus CX
Caution: Do not open
the scanner when the
document cover is open.
ink button. The ink cartridge holder moves to the
B
On
ink button for more than 3 seconds, or the printer will
B
ink button to move the print head.
B
and
ink lights flash. If one of the cartridges is
B
ink out
_